| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI LC-1-2005
| 使用波紋不銹鋼管(CSST)的燃氣管道系統
| Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26)
|
| ANSI/AGA LC-1-1991
| 使用波紋不銹鋼管的室內燃氣管線系統
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/AGA LC-1a-1993
| 使用波紋不銹鋼管的室內燃氣管線系統
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/AGA LC-1b-1994
| 使用波紋不銹鋼管的室內燃氣管線系統
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/ASME A112.19.4M Supplement 1-1998
| 搪瓷型鋼管子附件設備.補充件1
| Porcelain Enameled Formed Steel Plumbing Fixtures; Supplement 1
|
| ANSI/ASME A112.19.4M Supplement 2-2000
| 搪瓷型鋼管子附件.補充件2
| Porcelain Enameled Formed Steel Plumbing Fixtures; Supplement 2
|
| ANSI/ASME B36.10M-2004
| 焊接鍛鋼管和無縫鍛鋼管
| Welded and Seamless Wrought Steel Pipe
|
| ANSI/ASME B36.19M-2004
| 不銹鋼管
| Stainless Steel Pipe
|
| ANSI/ASTM A182/A 182M-2001
| 高溫設備用鍛制或軋制合金鋼管法蘭、鍛制管件、閥門及零件規范
| Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
| ANSI/ASTM A210-1996
| 鍋爐和過熱器用中碳素無縫鋼管規范
| Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
|
| ANSI/ASTM A213/A 213M-2001
| 鍋爐、過熱器和熱交換器用無縫鐵素體和奧氏體合金鋼管規范
| Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
|
| ANSI/ASTM A312/A 312M-2001
| 無縫和焊接奧氏體不銹鋼管規范
| Specification for Seamless and Welded Austenitic Stainless Steel Pipes
|
| ANSI/ASTM A450-1996
| 碳素鋼管、鐵素體合金鋼管及奧氏體合金鋼管規范
| Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
|
| ANSI/ASTM A523-1996
| 高壓管型電纜線路用平端無縫與電阻焊鋼管規范
| Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
|
| ANSI/ASTM A608-1991
| 高溫承壓設備用離心鑄造鐵鉻鎳高合金鋼管規范
| Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
|
| ANSI/ASTM A789/A 789M-2001
| 普通設備用無縫與焊接鐵素體/奧氏體不銹鋼管規范
| Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
|
| ANSI/ASTM A814/A 814M-2001
| 冷加工焊接奧氏體不銹鋼管規范
| Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
|
| ANSI/ASTM A815/A 815M-2001
| 鍛制鐵素體、鐵素體/奧氏體和馬氏體不銹鋼管配件規范
| Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
|
| ANSI/AWS D10.12M/D 10.12-2000
| 焊接低碳鋼管指南
| Guide for Welding Mild Steel Pipe
|
| ANSI/AWS D10.4-1986
| 焊接奧氏體鉻鎳不銹鋼管推薦慣例
| Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing, Recommended Practices for
|
| ANSI/AWS D18.1-1999
| 衛生潔具用奧氏體不銹鋼管和管道的焊接規范
| Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications
|
| ANSI/AWS D18.2-1999
| 奧氏體不銹鋼管內部焊接褪色度指南
| Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
|
| ANSI/AWWA C203-2002
| 給水鋼管煤焦油保護涂層和內襯.熱用搪瓷和膠帶
| Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied
|
| ANSI/AWWA C208-2001
| 預制給水鋼管配件尺寸
| Fabricated Steel Water Pipe Fittings, Dimensions for
|
| ANSI/AWWA C213-2001
| 給水鋼管的內、外層熔化粘結環氧涂層
| Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
|
| ANSI/AWWA C214-2007
| 供水鋼管外部膠帶包覆系統
| Tape Coating Systems for the Exterior of Steel Water Pipelines
|
| ANSI/AWWA C216-2007
| 給水鋼管用專用部件、連接件和配件外部可熱收縮交聯的聚烯烴涂層
| Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines
|
| ANSI/AWWA C217-1999
| 供水鋼管道專用型鋼、連接件和配件外部低溫礦脂帶和礦脂臘油帶包覆層
| Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coating for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines
|
| ANSI/AWWA C220-1998
| 4in(100mm)及以上尺寸的不銹鋼管
| Stainless Steel Pipe 4 in (100 mm) and Larger
|
| ANSI/AWWA C220a-1999
| 不銹鋼管.4英寸.(100 mm) 及更大. ANSI/AWWA C220a-98的附錄
| Stainless Steel Pipe, 4 In. (100 mm) and Larger, Addendum to ANSI/AWWA C220a-98
|
| ASME A112.19.4M Supplement 2-2
| 搪瓷鑄鋼管道固定件.補充件2
| (Porcelain enameled formed steel plumbing fixtures - Supplement 2)
|
| ASME A112.19.4M-1994
| 搪瓷鑄鋼管道固定件
| (Porcelain enameled formed steel plumbing fixtures)
|
| ASME B36.19M-1985
| 不銹鋼管
| (Stainless steel pipe)
|
| ASTM A 1016/A 1016Ma-2004
| 鐵素體合金鋼管、奧氏體合金鋼管和不銹鋼管一般要求的標準規范
| Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
|
| ASTM A 1019/A 1019M-2001
| 排污和排水用聚合物預涂的直徑為36英寸或不足36英寸的閉合肋鋼管的標準規范
| Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains
|
| ASTM A 1020/A 1020M-2002
| 鍋爐、加熱器、熱交換器和冷凝器裝置的熔焊碳素和碳錳鋼管的標準規范
| Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
|
| ASTM A 1024/A 1024M-2002
| 無縫平頭黑色鋼管線標準規范
| Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
|
| ASTM A 1037/A 1037M-2005
| 爐對焊黑色鋼管線的標準規范
| Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded
|
| ASTM A 1042/A 1042M-2004
| 排污和排水用復合波紋狀鋼管的標準規范
| Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
|
| ASTM A 1053/A 1053M-2006
| 焊接的鐵素體馬氏體不銹鋼管的標準規范
| Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
|
| ASTM A 106/A 106Ma-2006
| 高溫設施用無縫碳鋼管的標準規范
| Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
|
| ASTM A 134-1996
| 電熔(電弧)焊鋼管(NPS為16英寸和16英寸以上)的標準規范
| Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
|
| ASTM A 135/A 135M-2006
| 電阻焊接鋼管的標準規范
| Standard Specification for Electric-Resistance-Welded Steel Pipe
|
| ASTM A 139/A 139M-2004
| 電熔焊接鋼管用標準規范
| Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
|
| ASTM A 179/A 179Ma-1990
| 熱交換器和冷凝器用無縫冷拉低碳鋼管標準規范
| Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
|
| ASTM A 182/A 182Ma-2007
| 高溫設備用鍛制或軋制合金和不銹鋼管法蘭、鍛制配件、閥門及零件的標準規范
| Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
| ASTM A 209/A 209M-2003
| 鍋爐和過熱器用無縫碳鉬合金鋼管標準規范
| Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
|
| ASTM A 214/A 214M-1996
| 熱交換器與冷凝器用電阻焊接碳素鋼管的標準規范
| Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
|
| ASTM A 234/A 234M-2007
| 中溫與高溫設備用鍛制碳素鋼和合金鋼管道配件的標準規范
| Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
|
| ASTM A 252-1998
| 焊接鋼和無縫鋼管樁的標準規范
| Standard Specification for Welded and Seamless Steel Pipe Piles
|
| ASTM A 254-1997
| 銅焊鋼管規格的標準規范
| Standard Specification for Copper-Brazed Steel Tubing
|
| ASTM A 268/A 268Ma-2005
| 通用無縫和焊接鐵素體與馬氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
|
| ASTM A 269a-2007
| 通用無縫和焊接奧氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
|
| ASTM A 270a-2003
| 衛生設施用無縫和焊接奧氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
|
| ASTM A 312/A 312M-2007
| 無縫、焊接和強冷壓奧氏體不銹鋼管的標準規范
| Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
|
| ASTM A 333/A 333M-2005
| 低溫設備用無縫和焊接鋼管的標準規范
| Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
|
| ASTM A 334/A 334Ma-2004
| 低溫設備用無縫和焊接碳素和合金鋼管的標準規范
| Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
|
| ASTM A 335/A 335M-2006
| 高溫設備用無縫鐵素體合金鋼管的標準規范
| Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
|
| ASTM A 358/A 358M-2005
| 高溫設備和通用電熔焊奧氏體鉻鎳不銹鋼管標準規范
| Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
|
| ASTM A 369/A 369M-2006
| 高溫設備用鍛制和鏜加工碳素鋼管和鐵素體合金鋼管標準規范
| Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
|
| ASTM A 376/A 376M-2006
| 高溫中心站設備用無縫奧氏鋼管標準規范
| Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
|
| ASTM A 381-1996
| 高壓輸送用金屬弧焊鋼管的標準規范
| Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
|
| ASTM A 403/A 403M-2007
| 鍛造奧氏體不銹鋼管道系統配件用標準規范
| Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
|
| ASTM A 409/A 409M-2001
| 腐蝕場所或高溫下使用的焊接大口徑奧氏體鋼管標準規范
| Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
|
| ASTM A 423/A 423M-1995
| 無縫和電焊低合金鋼管的標準規范
| Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
|
| ASTM A 426/A 426M-2007
| 高溫設備用離心澆鑄鐵素體合金鋼管的標準規范
| Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
|
| ASTM A 450/A 450Ma-2004
| 碳素鋼管、鐵素體合金鋼管及奧氏體合金鋼管一般要求的標準規范
| Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
|
| ASTM A 451/A 451M-2006
| 高溫設備用離心鑄造奧氏體鋼管的標準規范
| Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
|
| ASTM A 513-2007
| 電阻焊碳素鋼與合金鋼機械鋼管的標準規范
| Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
|
| ASTM A 520-1997
| 符合ISO 鍋爐結構推薦標準規定的高溫用無縫和電阻焊碳素鋼管形產品的補充要求
| Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction
|
| ASTM A 523-1996
| 高壓管型電纜線路用平端無縫與電阻焊鋼管的標準規范
| Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
|
| ASTM A 524-1996
| 常溫和低溫用無縫碳素鋼管的標準規范
| Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
|
| ASTM A 53/A 53M-2007
| 黑色和熱浸鍍鋅焊接及無縫鋼管的標準規范
| Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
|
| ASTM A 530/A 530Ma-2004
| 專用碳素鋼和合金鋼管一般要求的標準規范
| Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
|
| ASTM A 587-1996
| 化學工業用電阻焊低碳鋼管的標準規范
| Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
|
| ASTM A 595/A 595M-2006
| 建筑用錐形、高強度低合金或低碳鋼管的標準規范
| Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
|
| ASTM A 608/A 608M-2006
| 高溫壓力設備用離心鑄造的鐵鉻鎳高合金鋼管標準規范
| Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
|
| ASTM A 618/A 618M-2004
| 熱塑焊接和無縫高強度低合金結構鋼管的標準規范
| Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
|
| ASTM A 632-2004
| 通用無縫和焊接奧氏體不銹鋼管(小直徑)標準規范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
|
| ASTM A 660-1996
| 高溫用離心鑄造碳素鋼管的標準規范
| Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
|
| ASTM A 671-2006
| 常溫和較低溫用電熔焊鋼管的標準規范
| Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
|
| ASTM A 672-2006
| 中溫高壓用電熔焊鋼管的標準規范
| Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
|
| ASTM A 691-1998
| 高溫下高壓裝置用電熔焊碳素鋼和合金鋼管的標準規范
| Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
|
| ASTM A 714-1999
| 高強度低合金焊接和無縫鋼管的標準規范
| Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
|
| ASTM A 742/A 742M-2003
| 波紋鋼管用預涂聚合物和金屬涂覆鋼薄板的標準規范
| Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
|
| ASTM A 758/A 758M-2000
| 具有改進的切口韌性的對縫焊鍛制碳素鋼管配件標準規范
| Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
|
| ASTM A 760/A 760M-2006
| 下水道和排水溝用金屬涂覆波紋鋼管標準規范
| Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
|
| ASTM A 762/A 762M-2000
| 下水道和排水溝用預涂聚合物波紋鋼管標準規范
| Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
|
| ASTM A 778-2001
| 焊接未退火的奧氏體不銹鋼管形制品標準規范
| Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
|
| ASTM A 789/A 789Mb-2005
| 通用無縫和焊接鐵素體/奧氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
|
| ASTM A 790/A 790M-2007
| 無縫和焊接鐵素體/奧氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
|
| ASTM A 795/A 795M-2007
| 消防用黑色和熱浸鍍鋅焊接鋼管及無縫鋼管用標準規范
| Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
|
| ASTM A 796/A 796M-2006
| 雨水、衛生污水和其它地下設施用波紋鋼管、管拱和拱的結構設計標準實施規范
| Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
|
| ASTM A 798/A 798M-2007
| 污水管及其它類似用途用工廠制波紋鋼管安裝的標準實施規程
| Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
|
| ASTM A 810-2001
| 熱浸鍍鋅鋼管用繞網標準規范
| Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
|
| ASTM A 813/A 813M-2007
| 單或雙焊接奧氏體不銹鋼管的標準規范
| Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
|
| ASTM A 814/A 814M-2007
| 冷加工焊接奧氏體不銹鋼管的標準規范
| Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
|
| ASTM A 815/A 815Ma-2007
| 鍛制鐵素體、鐵素體/奧氏體和馬氏體不銹鋼管道系統配件的標準規范
| Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
|
| ASTM A 822/A 822M-2004
| 液壓系統設備用無縫冷拔碳素鋼管的標準規范
| Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
|
| ASTM A 865/A 865M-2006
| 鋼管接頭用黑色或鍍鋅焊接或無縫鋼螺紋聯接套筒的標準規范
| Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
|
| ASTM A 872/A 872Ma-2007
| 腐蝕環境用離心鑄鐵素體/奧氏體不銹鋼管的標準規范
| Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
|
| ASTM A 928/A 928M-2005
| 填充金屬電熔焊鐵素體/奧氏體(二聯)不銹鋼管標準規范
| Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
|
| ASTM A 929/A 929M-2001
| 波紋鋼管用的經熱浸處理的金屬鍍覆薄鋼板標準規范
| Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
|
| ASTM A 943/A 943M-2001
| 噴模制無縫奧氏體不銹鋼管的標準規范
| Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
|
| ASTM A 949/A 949M-2001
| 噴模制無縫鐵素體/奧氏體不銹鋼管的標準規范
| Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
|
| ASTM A 960/A 960M-2007
| 鍛鋼管道配件的一般要求用標準規范
| Standard Specification for Common Requirements for Wrought Steel Piping Fittings
|
| ASTM A 978/A 978M-1997
| 預涂覆和聚乙烯復合肋式鋼管標準規范
| Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
|
| ASTM A 998/A 998M-1998
| 下水道和其他用途工廠制波紋鋼管中配件用鋼筋的結構設計標準實施規范
| Standard Practice for Structural Design of Reinforcements for Fittings in Factory - Made Corrugated Steel Pipe for Sewers and Other Applications
|
| ASTM A 999/A 999Ma-2004
| 合金鋼及不銹鋼管一般要求的標準規范
| Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
|
| ASTM B 861a-2006
| 鈦和鈦合金無縫鋼管的標準規范
| Standard Specification for Titanium and Titanium Alloy Seamless Pipe
|
| ASTM C 1610/C 1610Ma-2006
| 用鋼管混凝土柱技術的自密實混凝土的靜態析離標準試驗方法
| Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
|
| ASTM E 570-1997
| 鐵磁鋼管形制品的磁力泄漏檢驗
| Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
|
| ASTM F 1083-2006
| 柵欄結構用熱浸鍍鋅焊接鋼管的標準規范
| Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
|
| ASTM F 2181a-2002
| 外科植入物用鍛造的無縫不銹鋼管的標準規范
| Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
|
| ASTM F 2408-2007
| 用電鍍鋼管柱裝飾柵欄的標準規范
| Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
|
| ASTM F 2589-2006
| 使用鋼管柱裝飾圍欄的標準規范
| Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
|
| 編號 | 中文名稱 | 英文名稱 |
|---|