| 編號 | 中文名稱 | 英文名稱 |
|---|
| NF A05-677-1999
| 陰極保護.用于與陰極保護相接的埋沒的或浸入的鋼管防腐作用的外有機涂層.帶和可縮材料(歐洲標準EN12068)
| (Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials.)
|
| NF A49-002-1-1991
| 鋼管和配件.規范中使用的符號.第1部分:管和管狀配件
| (Steel tubes and fittings. Symbols for use in specifications. Part 1 : tubes and tubular accessories with cross-section.)
|
| NF A49-002-2-1991
| 鋼管和配件.規范中使用的符號.第2部分:正方形或矩型空心型材
| (Steel tubes and fittings. Symbols for use in specifications. Part 2 : square and rectangular hollow sections.)
|
| NF A49-002-3-1991
| 鋼管和配件.規范中使用的符號.第3部分:圓形截面的管狀配件
| (Steel tubes and fittings. Symbols for use in specifications. Part 3 : tubular fittings with circular cross-section.)
|
| NF A49-003-1991
| 鋼管.公差系統
| (Steel tubes. Tolerance systems.)
|
| NF A49-004-1984
| 鋼管.無縫管和圓截面焊接管及焊接配件.尺寸總圖及優選
| (Steel tubes. Seamless and welded tubes with circular section and supplies to be welded. General outlay of dimensions. Preferential selection.)
|
| NF A49-005-2003
| 焊接和無縫鋼管.管的尺寸和單位長度重量的一覽表
| (Seamless and welded steel tubes - General tables of dimensions and masses per unit length.)
|
| NF A49-031-1979
| 鋼管.彎曲半徑.非合金鋼管最小推薦值
| (STEEL TUBES. BENDING RADII. RECOMMENDED MINIMUM VALUES FOR UNALLOYED STEEL TUBES.)
|
| NF A49-051-1991
| 鋼管及鋼制管狀構件.材料鑒定用的標準顏色及性能標志
| (Steel tubes. Continuous character marking and colour coding for material identification.)
|
| NF A49-117-1985
| 鋼管.管道和其他用途光端無縫鋼管.鐵素體和奧氏體不銹鋼.尺寸.交貨技術條件
| (Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-141-1978
| 鋼管.一般商業用中壓平端焊接鋼管.（尺寸.交貨技術條件.）
| (STEEL TUBES. WELDED PLAIN END TUBES OF COMMERCIAL QUALITY FOR GENERAL PURPOSES AT MEAN PRESSURE. DIMENSIONS TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-145-1978
| 鋼管.熱加工細螺紋焊接鋼管.（尺寸.交貨技術條件.）
| (STEEL TUBES. HOT-FINISHED WELDED TUBES SUITABLE FOR THREADING.DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-147-1980
| 鋼管.一般用和管道用光端縱向焊接鋼管.奧氏體不銹鋼.（尺寸.交貨技術條件.）
| (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-148-1980
| 鋼管.一般用和管道用光端縱向焊接鋼管.鐵素體不銹鋼.（尺寸.交貨技術條件.）
| (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-150-1985
| 鋼管.水管系統用涂覆或保護焊接管.尺寸.交貨技術條件
| (Steel tubes. Welded tubes intended to be coated or protected for use in water piping systems. Dimensions. Technical delivery conditions.)
|
| NF A49-150-2003
| 包括人類生活用水在內的水成液的傳送用非合金鋼管和管接頭.技術交貨條件
| (Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.)
|
| NF A49-151-2003
| 包括飲用水在內的含水液體輸送用焊接不銹鋼管.交貨技術件
| (Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.)
|
| NF A49-160-1979
| 鋼管.混凝土包的加熱板用的焊接鋼管.（尺寸.交貨技術條件.）
| (STEEL TUBES. WELDED TUBES FOR HEATING PANELS ENCASED IN CONCRETE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-189-1980
| 鋼管.90度鍍鋅3d樣式的焊接曲線.（尺寸.交貨技術條件.）
| (STEEL TUBES. BUTT WELDING,NIGHT-ANGLED BENDS,3D,GALVANIZED DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-191-1975
| 鋼管.毛細管焊接或焊接釬接用鋼或鑄鐵接頭.（尺寸.交貨技術條件.）
| (STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-192-1981
| 鋼管.壓力容器用內螺紋非合金鋼焊接套管
| (STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.)
|
| NF A49-195-2001
| 螺紋鋼管配件
| (Steel threaded pipe fittings.)
|
| NF A49-200-1-2002
| 無縫壓力鋼管.交貨技術條件.第1部分:規定室溫特性的非合金鋼管
| (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.)
|
| NF A49-200-2-2002
| 無縫壓力鋼管.交貨技術條件.第2部分:規定高溫特性的非合金和合金鋼管
| (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2 : non-alloy and alloy steel tubes with specified elevated temperature properties.)
|
| NF A49-200-3-2002
| 無縫壓力鋼管.交貨技術條件.第3部分:合金細晶粒結構鋼管
| (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.)
|
| NF A49-200-4-2002
| 無縫壓力鋼管.交貨技術條件.第4部分:規定低溫特性的合金和非合金鋼管
| (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4 : non-alloy and alloy steel tubes with specified low temperature properties.)
|
| NF A49-201-1-2002
| 焊接壓力鋼管.交貨技術條件.第1部分:規定室溫特性的非合金鋼管
| (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.)
|
| NF A49-201-2-2002
| 焊接壓力鋼管.交貨技術條件.第2部分:規定高溫特性的電焊合金和非合金鋼管
| (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.)
|
| NF A49-201-3-2002
| 焊接壓力鋼管.交貨技術條件.第3部分:合金細晶粒結構鋼管
| (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.)
|
| NF A49-201-4-2002
| 焊接壓力鋼管.交貨技術條件.第4部分:規定低溫特性的電焊非合鋼管
| (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temperature properties.)
|
| NF A49-201-5-2002
| 焊接壓力鋼管.交貨技術條件.第5部分:規定高溫特性的埋弧焊接非合金和合金鋼管
| (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.)
|
| NF A49-201-6-2002
| 焊接壓力鋼管.交貨技術條件.第6部分:規定低溫特性的埋弧焊接非合金鋼管
| (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.)
|
| NF A49-214-1978
| 鋼管.耐高溫奧氏體無縫鋼管.（帶標準公差的尺寸.交貨技術條件）
| (STEEL TUBES.SEAMLESS AUSTENITIC STEEL TUBES FOR USE AT HIGH TEMPERATURES.DIMENSIONS (WITH NORMAL TOLERANCES).TECHNICAL CONDITIONS OF DELIVERY.)
|
| NF A49-217-1987
| 鋼管.熱交換器用無縫管.奧氏體不銹鋼和鐵素體鋼.（尺寸.交貨技術條件.）
| (Steel tubes. Seamless tubes for heat exchangers. Stainless ferritic, austenic or ferritoaustenitic steel grades. Dimensions. Technical delivery conditions.)
|
| NF A49-218-1979
| 鋼管.奧氏體不銹鋼熔爐用無縫鋼管.（帶標準公差或縮減公差的尺寸.交貨技術條件.）
| (STEEL PIPES. SEAMLESS PIPES FOR FURNACES. AUSTENITIC STAINLESS STEELS. DIMENSIONS (WITH NORMAL OR REDUCED TOLERANCES). TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-220-1990
| 鋼管.高溫用的無縫鋼管.尺寸.交貸的技術條件
| (STEEL TUBES. GROOVED SEAMLESS STEEL TUBES FOR USE AT HIGH TEMPERATURE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-244-1993
| 鋼管.壓力設備用焊接奧氏體不銹鋼和奧氏鐵素體軋制鋼管的尺寸和技術交貨條件
| (STEEL TUBES. WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY.)
|
| NF A49-247-1981
| 鋼管.熱交換器用縱向焊接鋼管.奧氏體不銹鋼.尺寸.交貨技術條件
| (Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-249-1980
| 鋼管.食品工業用光端縱向焊接鋼管.奧氏體不銹鋼.尺寸.交貨技術條件
| (Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-285-1982
| 鋼管.有質量要求的非合金或合金鋼制對縫焊接橢圓底座.尺寸.交貨技術條件
| (Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirements. Dimensions. Technical delivery conditions.)
|
| NF A49-289-1990
| 鋼管.用于高低溫條件下的對縫焊接管狀配件.非合金、合金和不銹鋼.尺寸.技術交貨條件
| (Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-296-1983
| 鋼管.帶質量要求的熔焊非合金或合金鋼制等徑或縮徑焊接三通管.尺寸.交貨技術條件
| (Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.)
|
| NF A49-300-1-2003
| 精密裝置用鋼管.交貨技術條件.第1部分:無縫冷拉管
| (Steel tubes for precision applications - Technical delivery conditions - Part 1 : seamless cold drawn tubes.)
|
| NF A49-300-2-2003
| 精密裝置用鋼管.交貨技術條件.第2部分:焊接冷拉管
| (Steel tubes for precision applications - Technical delivery conditions - Part 2 : welded cold drawn tubes.)
|
| NF A49-300-3-2003
| 精密裝置用鋼管.技術交貨條件.第3部分:焊接冷分級管
| (Steel tubes for precision applications - Technical delivery conditions - Part 3 : welded cold sized tubes.)
|
| NF A49-300-4-2003
| 精密裝置用鋼管.交貨技術條件.第4部分:液壓和氣壓動力系統用無縫冷拉管
| (Steel tubes for precision applications - Technical delivery conditions - Part 4 : seamless cold drawn tubes for hydraulic and pneumatic power systems.)
|
| NF A49-300-5-2003
| 精密用途鋼管.技術交貨條件.第5部分:焊接冷精加工方形和矩形鋼管
| (Steel tubes for precision applications - Technical delivery conditions - Part 5 : welded and cold sized square and rectangular tubes.)
|
| NF A49-311-1974
| 鋼管.機械用無縫管.尺寸.交貨技術條件
| (Steel tubes. Seamless tubes for mechanical application. Dimensions. Technical delivery conditions.)
|
| NF A49-313-1-2003
| 機械工程與綜合工程學用無縫環形鋼管.交貨技術條件.第1部分:非合金和合金鋼管
| (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1 : non-alloy and alloy steel tubes.)
|
| NF A49-317-1980
| 鋼管.機械用光端無縫鋼管.奧式體不銹鋼.（尺寸.交貨技術條件.）
| (STEEL TUBES. SEAMLESS PLAIN END TUBES FOR ENGINEERING USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-330-1985
| 鋼管.液壓和氣壓傳動系統用無縫冷拉鋼管.尺寸.交貨技術條件
| (Steel tubes. Seamless cold-drawn tubes for hydraulic and pneumatic power systems. Dimensions. Technical delivery conditions.)
|
| NF A49-341-1975
| 鋼管.機械用精密焊接鋼管.（尺寸.交貨技術條件.）
| (STEEL TUBES-PRECISION WELDED TUBES FOR MECHANICAL APPLICATION-DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-343-1980
| 鋼管.機械用D小于或等于168.3mm的縱向焊接鋼管.（尺寸.交貨技術條件.）
| (STEEL TUBES. LONGITUDINALLY WELDED D INFERIOR OR EQUAL TO 168,3 MM FOR ENGINEERING USE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-404-1-1998
| 易燃液體輸送管線用鋼管.技術交貨條件.第1部分:要求等級A的鋼管(歐洲標準EN 10208-1)
| (Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Part 1 : pipes of requirement class A.)
|
| NF A49-404-2-1996
| 易燃液體輸送管線用鋼管.交貨技術條件.第2部分:B類要求的鋼管
| (Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Part 2 : pipes of requirement class B.)
|
| NF A49-500-2001
| 管和聯接腳手架用活動鋼管.交貨技術條件
| (Loose steel tubes for tube and coupler scaffold - Technical delivery conditions.)
|
| NF A49-580-1988
| 鋼管腳手架和支承架用聯結件、中心螺栓和踏板.要求和測試程序
| (Cooplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes. Requirements and test procedures.)
|
| NF A49-647-1979
| 鋼管.不銹鋼、鐵素體和奧氏體鋼制圓形、正方形、矩形或橢圓形建筑用焊接鋼管.（尺寸.交貨技術條件.）
| (STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF DELIVERY.)
|
| NF A49-702-1980
| 鋼管.熱涂瀝青粘合劑地基的內外涂層
| (STEEL TUBES. EXTERNAL AND INTERNAL HOT-DIP COATINGS BASED ON HYDROCARBON-BEARING BONDING AGENTS.)
|
| NF A49-703-1988
| 鋼管.帶狀塑料外復層.卷繞
| (STEEL TUBE. EXTERNAL COATING PLASTIC BASED IN BANDS. APPLICATION BY WINDING UP.)
|
| NF A49-704-2002
| 岸上和海上管線用鋼管和配件.外面雙層聚氯乙烯擠壓涂料
| (Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings.)
|
| NF A49-705-1982
| 鋼管.聚乙烯外涂層.粉末燒結應用
| (STEEL TUBES. EXTERNAL POLYETHYLENE COATING. APPLICATION BY POWDER SINTERING.)
|
| NF A49-706-1988
| 鋼管.環氧樹脂外涂層.應用.檢驗和試驗
| (STEEL TUBES. EPOXY RESIN POWDER EXTERNAL COATING. APPLICATION. INSPECTION AND TEST.)
|
| NF A49-707-1992
| 鋼管.環氧樹脂粉末內表面涂敷層.涂敷.檢查和試驗
| (STEEL TUBES. EPOXY RESIN POWDER INTERNAL COATING. APPLICATION. INSPECTION AND TESTING.)
|
| NF A49-708-1-2002
| 近岸和海上管線用鋼管和配件.環氧樹脂及環氧樹脂改良外涂層
| (Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings.)
|
| NF A49-708-2-2002
| 近岸和海上管線用鋼管和配件.聚亞氨酯及聚亞氨酯改良外涂層
| (Steel tubes and fittings for on and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings.)
|
| NF A49-710-1988
| 鋼管.聚乙烯3層外覆層.擠壓的應用
| (STEEL TUBES. EXTERNAL COATING WITH THREE POLYETHYLENE BASED COATING. APPLICATION THROUGH EXTRUSION.)
|
| NF A49-711-1992
| 鋼管.帶三層聚丙烯涂層的外包履層.用擠壓法涂施
| (STEEL TUBES. EXTERNAL COATING WITH THREE POLYPROPYLENE LAYERS COATING. APPLICATION BY EXTRUSION.)
|
| NF A49-712-1993
| 鋼管.帶二層環氧樹脂聚丙烯涂層的外包履層.用擠壓法涂施
| (STEEL TUBES. EXTERNAL COATING WITH TWO RESIN EPOXY-POLYPROPYLENE LAYER COATING. APPLICATION BY EXTRUSION.)
|
| NF A49-713-1993
| 鋼管.帶有環氧樹脂及聚酰胺基涂層的外部和/或內部雙層覆層
| (STEEL TUBES. EXTERNAL AND/OR INTERNAL TWO LAYERS COATING WITH EPOXY RESIN AND POLYAMIDE BASED COATING.)
|
| NF A49-714-1997
| 鋼管.帶有酚醛樹脂或環氧樹脂及聚酰胺基涂層的內部雙層覆層
| (STEEL TUBES. INTERNAL TWO LAYERS COATING WITH PHENOL RESIN OR EPOXY RESIN AND POLYAMIDE BASED COATING.)
|
| NF A49-716-1998
| 鋼管.焊接接頭鍍膜配件和管的外結構.
| (STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITTING COATING FOR WELDED JOINT.)
|
| NF A49-719-1998
| 鋼管用內部和/或外部防護涂層.用于自動裝置的熱浸鍍鋅涂層規范
| (INTERNAL AND/OR EXTERNAL PROTECTIVE COATINGS FOR STEEL TUBES. SPECIFICATION FOR HOT DIP GALVANIZED COATINGS APPLIED IN AUTOMATIC PLANTS. (EUROPEAN STANDARD EN 10240).)
|
| NF A49-854-1988
| 鋼管.扭轉試驗
| (Steel tubes. Up setting test.)
|
| NF A49-875-1-1996
| 鋼管的無損檢測.第1部分:證明液壓密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗
| (Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.)
|
| NF A49-875-10-2000
| 鋼管的無損檢驗.第10部分:檢測缺陷用自動熔弧焊鋼管焊縫的X射線照相試驗
| (Non-destructive testing of steel tubes - Part 10 : radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections.)
|
| NF A49-875-11-2000
| 鋼管的無損檢驗.第11部分:檢測表面缺陷用無縫和焊接鋼管的液體滲透試驗
| (Non-destructive testing of steel tubes - Part 11 : liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections.)
|
| NF A49-875-12-2000
| 鋼管的無損檢驗.第12部分:檢測表面缺陷用無縫和焊接錳鋼管的磁粉檢測
| (Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.)
|
| NF A49-875-13-2000
| 鋼管的無損檢驗.第13部分:無縫和焊接(埋弧焊)鋼管的自動全周邊超聲厚度檢測
| (Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged ar welded) steel tubes.)
|
| NF A49-875-14-2000
| 鋼管的無損檢驗.第14部分:層面缺陷探測用無縫鋼管和焊接(除埋弧焊外)鋼管的自動超聲試驗
| (Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imperfections.)
|
| NF A49-875-15-2000
| 鋼管的無損檢驗.第15部分:層面缺陷探測用焊接鋼管的生產用焊接帶材/板材自動超聲試驗
| (Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections.)
|
| NF A49-875-16-2000
| 鋼管的無損檢驗.第16部分:層面缺陷探測用焊接鋼管的焊縫鄰近區域的自動超聲試驗
| (Non-destructive testing of steel tubes - Part 16 : automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections.)
|
| NF A49-875-17-2000
| 鋼管的無損檢驗.第17部分:層面缺陷探測用無縫和焊接鋼管末端超聲試驗
| (Non-destructive testing of steel tubes - Part 17 : ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections.)
|
| NF A49-875-18-2000
| 鋼管的無損檢驗.第18部分:層面缺陷探測用無縫和焊接錳鋼管末端磁粉檢驗
| (Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.)
|
| NF A49-875-2-2000
| 鋼管的無損檢驗.第2部分:檢驗液壓密封性用無縫和焊接奧氏體和奧氏體鐵素體鋼管(埋弧焊除外)的自動渦流試驗
| (Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of)
|
| NF A49-875-3-2000
| 鋼管的無損檢驗.第3部分:檢測缺陷用無縫和焊接鋼管(埋弧焊除外)的自動渦流試驗
| (Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.)
|
| NF A49-875-4-2000
| 鋼管的無損檢驗.第4部分:檢測橫向缺陷用無縫鐵磁鋼管的自動全周邊電磁變換器/磁漏試驗
| (Non-destructive testing of steel tubes - Part 4 : automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections)
|
| NF A49-875-5-2000
| 鋼管的無損檢驗.第5部分:檢測縱向缺陷用無縫和焊接(除埋弧焊)錳鋼管的自動全周邊電磁變換器/磁漏試驗
| (Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for)
|
| NF A49-875-6-2000
| 鋼管的無損檢驗.第6部分:檢測橫向缺陷用無縫鋼管的自動全周邊超聲試驗
| (Non-destructive testing of steel tubes - Part 6 : Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections.)
|
| NF A49-875-7-1996
| 鋼管的無損試驗.第7部分:縱向缺陷探測用無縫鋼管和焊接(除埋弧焊外)鋼管的自動全周邊超聲波試驗
| (Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.)
|
| NF A49-875-8-2000
| 鋼管的無損檢驗.第8部分:檢測縱向缺陷用電焊鋼管焊縫的自動超聲試驗
| (Non-destructive testing of steel tubes - Part 8 : automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections.)
|
| NF A49-875-9-2000
| 鋼管的無損檢驗.第9部分:檢測縱向和/或橫向缺陷用埋弧焊鋼管焊縫的自動超聲試驗
| (Non-destructive testing of steel tubes - Part 9 : automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections.)
|
| NF A49-876-2000
| 鋼管的無損檢驗.1級和2級無損檢驗人員的資格和能力
| (Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel.)
|
| NF A49-880-1983
| 鋼管.熱浸鍍鋅.管和管附件鍍層的化學分析
| (Steel tubes. Hot dip galvanization. Chemical analysis of the coating of tubes and tubular accessories.)
|
| NF A49-950-1996
| 不銹鋼管.尺寸、公差和單位長度的規范質量
| (Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length.)
|
| NF A81-365-12-1994
| 軟釬焊劑.試驗方法.第12部分:鋼管腐蝕試驗
| (SOFT SOLDERING FLUXES. TEST METHODS. PART 12 : STEEL TUBE CORROSION TEST. (EUROPEAN STANDARD EN ISO 9455-12).)
|
| NF E25-800-0-1994
| 緊固件.波紋鋼管用螺栓.第0部分:按要求所制的螺栓
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 0 : BOLTS RELATED PRESCRIPTIONS (SCREWS + NUTS).)
|
| NF E25-800-1-1994
| 緊固件.波紋鋼管用螺栓.第1部分:帶法蘭或不帶法蘭,帶尖或不帶尖的六角頭螺釘.產品等級A
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
|
| NF E25-800-2-1994
| 緊固件.波紋鋼管用螺栓.第2部分:帶尖或不帶尖的圓頭螺釘.產品等級A
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
|
| NF E25-800-3-1994
| 緊固件.波紋鋼管用螺栓.第3部分:不帶法蘭的凸形六角螺母.產品等級C
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.)
|
| NF E25-800-4-1994
| 緊固件.波紋鋼管用螺栓.第4部分:帶法蘭的凸形螺母.產品等級C
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.)
|
| NF E29-726-1974
| 真空技術.真空管道用鋼管.尺寸
| (VACUUM TECHNOLOGY. STEEL TUBES FOR VACUUM PIPES. DIMENSIONS)
|
| NF E39-011-2003
| 區域供暖管道.直埋式熱水供暖網用預隔熱連接的管道系統.聚氨酯熱絕緣和聚乙烯外覆層的用戶鋼管組件
| (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene)
|
| NF E39-012-2003
| 區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系統.聚氨酯隔熱和聚乙烯外護層的入戶鋼管用接頭組件
| (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies for steel service pipes, polyurethane thermal insulation and outer casing of polye)
|
| NF E39-013-2003
| 區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系統.聚氨酯隔熱和聚乙烯外覆層進宅鋼管用鋼閥門組件
| (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of pol)
|
| NF E39-014-2003
| 區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系統.聚氨酯隔熱和聚乙烯外覆層的進宅鋼管用接合組件
| (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of poluethyl)
|
| NF J22-860-1993
| 造船工業.帶鋼管法蘭的焊接艙壁件.PN6.PN10.PN16.PN20
| (Shipbuilding. Welded bulkhead pieces with flanges for steel pipework. Pn 6, PN10, PN 16, PN 20.)
|
| NF L12-610-1968
| 耐熱鋼和鋼合金半成品冷拉無縫圓鋼管.航空和航天工業選用
| (SELECTION OF COLD DRAWN SEAMLESS STEEL TUBES OF CIRCULAR CROSS-SECTION FOR THE AEROSPACE INDUSTRY.)
|
| NF M50-022-2000
| 燃?xì)夤?yīng)系統.焊接鋼管線.功能要求
| (Gas supply systems - Welding steel pipework - Functional requirements.)
|
| NF M87-203-1997
| 石油和天然氣工業.作鉆井桿用的鋼管.規范
| (PETROLEUM AND NATURAL GAS INDUSTRIES. STEEL PIPES FOR USE AS DRILL PIPE. SPECIFICATION. (EUROPEAN STANDARD EN ISO 11961).)
|
| NF M87-207-2002
| 石油和天然氣工業.油井和套管用鋼管
| (Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells.)
|
| NF P16-325-1-1999
| 廢水系統有插端和管座的徑向焊接熱浸電鍍鋼管管道和配件.第1部分:要求,試驗和質量控制(EN1123-1)
| (Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.)
|
| NF P16-325-2-1999
| 廢水系統有插端和管座的徑向焊接熱浸電鍍鋼管管道和配件.第2部分:尺寸(EN1123-2)
| (Pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 2 : dimensions.)
|
| NF P16-326-1-1999
| 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第1部分:要求、試驗和質量控制
| (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.)
|
| NF P16-326-2-1999
| 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第2部分:系統S.尺寸
| (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 2 : systems S. Dimensions.)
|
| NF P16-326-3-1999
| 廢水系統用帶套管的縱向焊接不銹鋼管的管和配件.第2部分:系統X.尺寸
| (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 3 : system X. Dimensions.)
|
| NF R16-214-1-1992
| 內燃機.高壓注油管用鋼管.第1部分:密封冷拔單壁鋼管的要求
| (Compression-ignition engines. Steel tubes for high-pressure fuel injection pipes. Part 1 : requirements for seamless cold-drawn single-wall tubes.)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|