| 編號 | 中文名稱 | 英文名稱 |
|---|
| ISO 10124-1994
| 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 層狀缺陷檢測用超聲檢驗
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
|
| ISO 10332-1994
| 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 驗證液壓防泄漏用超聲波檢驗
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness
|
| ISO 10543-1993
| 壓力用無縫及熱拉伸焊接鋼管 全周邊超聲波厚度檢測
| Seamless and hot-stretch-reduced welded steel tubes for pressure purposes; full peripheral ultrasonic thickness testing
|
| ISO 10763-1994
| 液壓傳動 端面平齊的無縫和焊接型精密鋼管 尺寸及標稱工作壓力
| Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
|
| ISO 11120-1999
| 氣瓶 150升～3000升水容量的可重復充裝無縫鋼管氣瓶 設計、結構和試驗
| Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing
|
| ISO 1127-1992
| 不銹鋼管 尺寸、公差和單位長度的公稱質量
| Stainless steel tubes; dimensions, tolerances and conventional masses per unit length
|
| ISO 1129-1980
| 鍋爐、過熱器和熱交換器用鋼管 尺寸、公差和單位常用重量
| Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length
|
| ISO 11484-1994
| 壓力用途鋼管 無損檢驗人員的資格及認證
| Steel tubes for pressure purposes - Qualification and certification of non-destructive testing (NDT) personnel
|
| ISO 11496-1993
| 壓力用途的承壓無縫和焊接鋼管 層間不完整性檢查的管端超聲波檢測
| Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections
|
| ISO 11960 Technical Corrigendum 1-2006
| 石油和天然氣工業.油井套管或油管用鋼管.技術勘誤1
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1
|
| ISO 11960-2004
| 石油和天然氣工業.油井套管和油管用鋼管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
|
| ISO 11961-1996
| 石油和天然氣工業 鉆井桿用鋼管 規范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
|
| ISO 12094-1994
| 壓力用途的承壓焊接鋼管 焊接鋼管用鋼帶/鋼板分層缺陷檢測用超聲波試驗
| Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
|
| ISO 12095-1994
| 壓力用途的承壓無縫和焊接鋼管 液體滲透試驗
| Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing
|
| ISO 12096-1996
| 壓力用途的承壓埋弧焊接鋼管 焊縫缺陷檢測用X射線檢查
| Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections
|
| ISO 13663-1995
| 壓力用途的承壓焊接鋼管 焊縫周圍分層缺陷檢測用超聲波試驗
| Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
|
| ISO 13664-1997
| 壓力用途的承壓無縫和焊接鋼管 管端分層組織缺陷探測用磁粉檢驗
| Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections
|
| ISO 13665-1997
| 壓力用途的承壓無縫和焊接鋼管 管身表面缺陷探測用磁粉檢驗
| Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
|
| ISO 13680 Technical Corrigendum 2-2004
| 石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件.技術勘誤2
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2
|
| ISO 13680-2000
| 石油和天然氣工業 用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
|
| ISO 15741-2001
| 色漆和清漆 海上和近海的非腐蝕氣體鋼管內側的減小摩擦涂層
| Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases
|
| ISO 16172-2006
| 波紋鋼管用連續熱浸金屬涂層鋼板
| Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
|
| ISO 2037-1992
| 食品工業用不銹鋼管
| Stainless steel tubes for the industry
|
| ISO 2937-1974
| 機械用光端無縫鋼管
| Plain end seamless steel tubes for mechanical application
|
| ISO 3183-2007
| 石油和天然氣工業.管道運輸系統用鋼管
| Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
|
| ISO 3183-3 Technical Corrigendum 1-2000
| 石油和天然氣工業.管道鋼管.交貨技術條件.第3部分:C級鋼管的要求.技術勘誤1
| Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C; Technical Corrigendum 1
|
| ISO 3304-1985
| 光端精密無縫鋼管 交貨技術條件
| Plain end seamless precision steel tubes; Technical conditions for delivery
|
| ISO 3305-1985
| 光端焊接精密鋼管 交貨技術條件
| Plain end welded precision steel tubes; Technical conditions for delivery
|
| ISO 3306-1985
| 焊后定徑光端精密鋼管 交貨技術條件
| Plain end as-welded and sized precision steel tubes; Technical conditions for delivery
|
| ISO 3545-1-1989
| 鋼管和管件 規范中使用的符號 第1部分:圓形截面的管和管狀附件
| Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular cross-section
|
| ISO 3545-2-1989
| 鋼管和管件 規范中使用的符號 第2部分:正方形和矩形中空截面
| Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections
|
| ISO 3545-3-1989
| 鋼管和管件 規范中使用的符號 第3部分:圓形截面管件
| Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section
|
| ISO 4200-1991
| 光端焊接和無縫鋼管 管的尺寸和單位長度重量的一覽表
| Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length
|
| ISO 4394-1-1980
| 流體傳動系統和元件.缸筒.第1部分:對特殊精加工內徑的鋼管的要求
| Fluid power systems and components-- Cylinder barrels; Part 1 : Requirements for steel tubes with specially finished bores
|
| ISO 5252-1991
| 鋼管 公差系列
| Steel tubes; tolerance systems
|
| ISO 5256-1985
| 地下或水下管路用鋼管和管件 管內外涂瀝青或?yàn)r青油衍生物
| Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials
|
| ISO 5625-1978
| 造船 鋼管管路法蘭焊接通艙管 PN6、PN10和PN16
| Shipbuilding; Welded bulkhead pieces with flanges for steel pipework; PN 6, PN 10 and PN 16
|
| ISO 65-1981
| 按照ISO 7/1 車螺紋的碳素鋼管
| Carbon steel tubes suitable for screwing in accordance with ISO 7/1
|
| ISO 6758-1980
| 熱交換器用焊接鋼管
| Welded steel tubes for heat exchangers
|
| ISO 6759-1980
| 熱交換器用無縫鋼管
| Seamless steel tubes for heat exchangers
|
| ISO 6761-1981
| 鋼管 焊接用管端和配件的預處理
| Steel tubes; Preparation of ends of tubes and fittings for welding
|
| ISO 7598-1988
| 適于按照ISO 7/1車螺紋用不銹鋼管
| Stainless steel tubes suitable for screwing in accordance with ISO 7-1
|
| ISO 8535-1-2006
| 柴油發動機.高壓噴射燃油管用鋼管.第1部分:無縫冷拉制單壁鋼管的要求
| Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
|
| ISO 8535-2-2003
| 壓燃式發動機.高壓燃油噴管用鋼管.第2部分:組合管的要求
| Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes |
| ISO 9095-1990
| 鋼管 鑒別材料用連續符號標志和顏色碼
| Steel tubes; continuous character marking and colour coding for material identification
|
| ISO 9302-1994
| 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 液壓密封驗證電磁試驗法
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
|
| ISO 9303-1989
| 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測縱向缺陷用全周邊超聲波試驗
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections
|
| ISO 9304-1989
| 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測缺陷用渦流電流試驗
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections
|
| ISO 9305-1989
| 壓力用途的無縫鋼管 橫向缺陷全周邊超聲電流檢驗
| Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections
|
| ISO 9329-1-1989
| 壓力用途的無縫鋼管 交貨技術條件 第1部分:規定室溫性能的非合金鋼
| Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties
|
| ISO 9329-2-1997
| 壓力用途的無縫鋼管 交貨技術條件 第2部分:規定高溫性能的非合金鋼和合金鋼
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
|
| ISO 9329-3-1997
| 壓力用途的無縫鋼管 交貨技術條件 第3部分:規定低溫性能的非合金鋼和合金鋼
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties
|
| ISO 9329-4-1997
| 壓力用途的無縫鋼管 交貨技術條件 第4部分:奧氏體不銹鋼
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
|
| ISO 9330-1-1990
| 壓力用途的焊接鋼管 交貨技術條件 第1部分:規定室溫性能的非合金鋼管
| Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties
|
| ISO 9330-2-1997
| 壓力用途的焊接鋼管 交貨技術條件 第2部分:規定高溫性能的電阻焊接和感應焊接非合金鋼管和合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
|
| ISO 9330-3-1997
| 壓力用途的焊接鋼管 交貨技術條件 第3部分:規定低溫性能的電阻焊接和感應焊接非合金鋼管和合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
|
| ISO 9330-4-2000
| 壓力用途的焊接鋼管 交貨技術條件 第4部分:規定高溫性能的埋弧焊接非合金鋼管和合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
|
| ISO 9330-5-2000
| 壓力用途的焊接鋼管 交貨技術條件 第5部分:規定低溫性能的埋弧焊接非合金鋼管和合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
|
| ISO 9330-6-1997
| 壓力用途的焊接鋼管 交貨技術條件 第6部分:奧氏體不銹鋼管的焊接長度
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
|
| ISO 9402-1989
| 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測縱向缺陷用鐵磁鋼管全周邊磁轉換/磁鏈試驗
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
|
| ISO 9455-12-1992
| 軟釬焊劑 試驗方法 第12部分:鋼管腐蝕試驗
| Soft soldering fluxes; test methods; part 12: steel tube corrosion test
|
| ISO 9598-1989
| 壓力用途的無縫鋼管 檢測橫向缺陷用鐵磁鋼管全周邊磁轉換/磁鏈試驗
| Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
|
| ISO 9764-1989
| 壓力用途的電阻焊和感應焊鋼管 焊縫的縱向缺陷超聲波檢驗
| Electric resistance and induction welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal imperfections
|
| ISO 9765-1990
| 壓力用途的埋弧焊鋼管 焊縫的縱向和/或橫向缺陷超聲波檢測
| Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
|
| 編號 | 中文名稱 | 英文名稱 |
|---|