| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 10028-7-2000
| 壓力用途的鋼板制品 第7部分：不銹鋼管
| Flat products made of steels for pressure purposes - Part 7: Stainless steels
|
| EN 10208-1-1997
| 易燃流體管道用鋼管 交貨技術條件 第1部分：符合A類要求的管材
| Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
|
| EN 10208-2-1996+AC-1996
| 易燃流體管道用鋼管 交貨技術條件 第2部分：符合B類要求的管材
| Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
|
| EN 10216-1-2002
| 壓力用途的無縫鋼管 交貨技術條件 第1部分：有規定室溫特性的非合金鋼管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties / Note: To be amended by EN 10216-1/prA1 (2003-07).
|
| EN 10216-2-2002
| 壓力用途的無縫鋼管 交貨技術條件 第2部分：有規定高溫特性的非合金及合金鋼管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties / Note: To be amended by EN 10216-2/prA1 (2003-07).
|
| EN 10216-3-2002
| 壓力用途的無縫鋼管 交貨技術條件 第3部分：合金細晶粒鋼管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes / Note: To be amended by EN 10216-3/prA1 (2003-07).
|
| EN 10216-4-2002
| 壓力用途的無縫鋼管 交貨技術條件 第4部分：有規定低溫特性的非合金及合金鋼管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties / Note: To be amended by EN 10216-4/prA1 (2003-07).
|
| EN 10217-1-2002
| 壓力用途的焊接鋼管 交貨技術條件 第1部分：有規定室溫特性的非合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
|
| EN 10217-2-2002
| 壓力用途的焊接鋼管 交貨技術條件 第2部分：有規定高溫特性的電焊非合金及合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
|
| EN 10217-3-2002
| 壓力用途的焊接鋼管 交貨技術條件 第3部分：合金細晶粒鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
|
| EN 10217-4-2002
| 壓力用途的焊接鋼管 交貨技術條件 第4部分：有規定低溫特性的電焊非合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
|
| EN 10217-5-2002
| 壓力用途的焊接鋼管 交貨技術條件 第5部分：有規定高溫特性的埋弧焊非合金及合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
|
| EN 10217-6-2002
| 壓力用途的焊接鋼管 交貨技術條件 第6部分：有規定低溫特性的埋弧焊非合金鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
|
| EN 10220-2002
| 無縫和焊接鋼管 單位長度的尺寸和質量
| Seamless and welded steel tubes - Dimensions and masses per unit length
|
| EN 10224-2002
| 輸送液體（包括人類生活用水）用的非合金鋼管和管件 交貨技術條件
| Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
|
| EN 10240-1997
| 鋼管內或外保護覆層 用于自動車間的熱浸電動覆膜規范
| Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
|
| EN 10246-1-1996
| 鋼管的無損檢測 第1部分：證明液壓密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗
| Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
|
| EN 10246-10-2000
| 鋼管的無損檢測 第10部分：鋼管缺陷探測用的自動熔弧焊鋼管焊縫的射線檢驗
| Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
|
| EN 10246-11-2000
| 鋼管的無損檢測 第11部分：表面缺陷探測用的無縫和焊接鋼管的液體滲透檢驗
| Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
|
| EN 10246-12-2000
| 鋼管的無損檢測 第12部分：表面缺陷探測用的無縫和焊接鐵磁鋼管的磁粉檢驗
| Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
|
| EN 10246-13-2000
| 鋼管的無損檢測 第13部分：無縫和焊接鋼管（埋弧焊除外）自動全周界厚度的超聲檢驗
| Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
|
| EN 10246-14-1999
| 鋼管的無損檢測 第14部分：層狀缺陷探測用的無縫和焊接鋼管(埋弧焊接除外)的自動超聲檢驗
| Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
|
| EN 10246-15-2000
| 鋼管的無損檢測 第15部分：層狀缺陷探測用的制造焊接鋼管用鋼帶/鋼板的自動超聲檢驗
| Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
|
| EN 10246-16-2000
| 鋼管的無損檢測 第16部分：層狀缺陷探測用的焊接鋼管焊縫附近區域的自動超聲檢驗
| Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
|
| EN 10246-17-2000
| 鋼管的無損檢測 第17部分：層狀缺陷探測用的無縫和焊接鋼管端部的自動超聲檢驗
| Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
|
| EN 10246-18-2000
| 鋼管的無損檢測 第18部分：層狀缺陷探測用的無縫和焊接鐵磁鋼管端部的磁粉檢驗
| Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
|
| EN 10246-2-2000
| 鋼管的無損檢測 第2部分：證明液壓密封性用無縫和焊接奧氏體和奧氏體鐵素體鋼管（埋弧焊除外） 的自動渦流
| Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
|
| EN 10246-3-1999
| 鋼管的無損檢測 第3部分：缺陷探測用無縫和焊接鋼管(埋弧焊除外)的自動渦流檢驗
| Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
|
| EN 10246-4-1999
| 鋼管的無損檢測 第4部分：橫向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁
| Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
|
| EN 10246-5-1999
| 鋼管的無損檢測 第5部分：徑向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁
| Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
|
| EN 10246-6-1999
| 鋼管的無損檢測 第6部分：橫向缺陷探測用無縫鋼管的自動全周界超聲檢驗
| Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
|
| EN 10246-7-1996
| 鋼管的無損檢測 第7部分：縱向缺陷探測用的無縫和焊接鐵磁鋼管(埋弧焊除外)的自動周界超聲檢驗
| Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections
|
| EN 10246-8-1999
| 鋼管的無損檢測 第8部分：縱向缺陷探測用電焊鋼管焊縫的自動超聲檢驗
| Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
|
| EN 10246-9-2000
| 鋼管的無損檢測 第9部分：探測用縱向和/或橫向缺陷埋弧焊鋼管焊縫的自動超聲檢驗
| Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
|
| EN 10256-2000
| 鋼管的無損檢測 1級和2級無損檢測人員的資格和能力
| Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
|
| EN 10266-2003
| 鋼管、配件和結構空心型材 .產品標準中使用的符號和術語定義
| Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
|
| EN 10288-2002
| 岸上和海上管路鋼管及配件 外表兩層噴涂聚乙烯底化
| Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
|
| EN 10289-2002
| 岸上和海上管路鋼管及配件 加有環氧樹脂和改性環氧樹脂膠的外用液體
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
|
| EN 10290-2002
| 岸上和海上管路鋼管及配件 加有聚氨脂和改性聚氨脂膠的外用液體
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
|
| EN 10296-1-2003
| 機械和一般工程用途的焊接圓形鋼管 交貨技術條件 第1部分：非合金鋼管和合金鋼管
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
|
| EN 10297-1-2003
| 機械和一般工程用途的無縫圓形鋼管 交貨技術條件 第1部分：非合金鋼管和合金鋼管
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
|
| EN 10301-2003
| 岸上和海上管路鋼管及配件 減小非腐蝕性氣體輸送摩擦力的內涂層
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
|
| EN 10305-1-2002
| 高精密度用途的鋼管 交貨技術條件 第1部分：冷拔無縫鋼管
| Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
|
| EN 10305-2-2002
| 高精密度用途的鋼管 交貨技術條件 第2部分：冷拔焊接鋼管
| Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
|
| EN 10305-3-2002
| 高精密度用途的鋼管 交貨技術條件 第3部分：冷定徑焊接鋼管
| Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
|
| EN 10305-4-2003
| 高精密度用途的鋼管 交貨技術條件 第4部分：液壓和氣動系統用冷拔無縫鋼管
| Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
|
| EN 10305-5-2003
| 高精密度用途的鋼管 交貨技術條件 第5部分：冷定徑方形和矩形焊接鋼管
| Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes
|
| EN 10312-2002
| 傳送人類消耗的含水液體（包括水）的焊焊接不銹鋼管 交貨技術條件
| Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
|
| EN 1123-1-1999
| 廢水系統用帶套管的縱向焊接熱浸鍍鋅鋼管管道及配件 第1部分：要求、測試和質量控制
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
|
| EN 1123-1/prA1-2002
| 廢水系統用帶套管的縱向焊接熱浸鍍鋅鋼管管道及配件 第1部分：要求、測試和質量控制 修改A1
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1
|
| EN 1123-2-1999
| 廢水系統用帶套管和插口的縱向焊接熱浸鍍鋅鋼管管道及配件 第2部分：尺寸
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions
|
| EN 1124-1-1999
| 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第1部分：要求、測試、質量控制
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
|
| EN 1124-1/prA1-2002
| 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第1部分：要求、測試、質量控制 修改A1
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1
|
| EN 1124-2-1999
| 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道和配件 第2部分：系統S 尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S - Dimensions
|
| EN 1124-3-1999
| 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第3部分：系統X 尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
|
| EN 12068-1998
| 陰極保護 與陰極保護有關的埋于地下的或浸于水中的鋼管防腐的外部有機涂層、帶條和冷縮材料
| Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
|
| EN 12732-2000
| 燃?xì)夤?yīng)系統 焊接鋼管 功能要求
| Gas supply systems - Welding steel pipework - Functional requirements
|
| EN 39-2001
| 管和連接腳手架用活動式鋼管 技術交貨條件
| Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions
|
| EN 642-1994
| 包括接頭、配件的圓柱型和非圓柱型預應力混凝土壓力管和預應力鋼管的特殊要求
| Prestressed concrete pressure pipes, cylinder and non-cylinder type, including joints, fittings and specific requirement for prestressing steel for pipes
|
| EN 74-1988
| 用于由鋼管制造的工作腳手架和工作架的管接頭、活動套管和底板 要求和試驗程序
| Couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes; Requirements and test procedures
|
| EN ISO 1127-1996
| 不銹鋼管 尺寸、公差和單位長度的公稱質量
| Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
|
| EN ISO 11960-2001+AC-2002
| 石油和天然氣工業 油井套管和油管用鋼管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)
|
| EN ISO 11961-1996
| 石油和天然氣工業 鉆井桿用鋼管 規范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996)
|
| EN ISO 13680-2001
| 石油和天然氣工業 用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000)
|
| EN ISO 9455-12-1994
| 軟釬焊劑 試驗方法 第12部分：鋼管腐蝕試驗
| Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992)
|
| prEN 10208-3-1997
| 易燃流體管道用鋼管 交貨技術條件 第3部分：符合C類要求的管材
| Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 3: Pipes of requirement class C
|
| prEN 10216-5-1998
| 壓力用途的無縫鋼管 交貨技術條件 第5部分：不銹鋼管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
|
| prEN 10217-7-1998
| 壓力用途的焊接鋼管 交貨技術條件 第7部分：不銹鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
|
| prEN 10255-2002
| 適用于焊接和加工螺紋的非合金鋼管 交貨技術條件
| Non-alloy steel tubes suitable for welding or threading - Technical delivery conditions
|
| prEN 10285-1996
| 岸上和海上管路用鋼管及配件 外部三層噴涂聚乙烯底化
| Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coatings
|
| prEN 10286-1996
| 岸上和海上管路用鋼管及配件 外表三層噴涂聚丙烯底化
| Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatings
|
| prEN 10287-1996
| 岸上和海上管路用鋼管及配件 外表熔化聚乙烯底化
| Steel tubes and fittings for on and offshore pipelines - External fused polyethylene based coatings
|
| prEN 10296-2-2001
| 機械和一般工程用途的焊接鋼管 交貨技術條件 第2部分：不銹鋼管
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes
|
| prEN 10297-2-2001
| 機械和一般工程用途的無縫環行鋼管 交貨技術條件 第2部分：不銹鋼管
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes
|
| prEN 10298-2002
| 岸上和海上管路鋼管及配件 水泥沙漿內襯
| Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar
|
| prEN 10300-2002
| 岸上和海上管路鋼管及配件 外表涂層用瀝青加熱材料
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
|
| prEN 10305-6-1999
| 高精密度用途的鋼管 交貨技術條件 第6部分：液壓和氣動系統用冷拔焊接鋼管
| Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
|
| prEN 10309-1999
| 岸上和海上管路鋼管及配件 外表環氧樹脂粉末涂層
| Steel tubes and fittings for onshore and offshore pipelines - External epoxy powder coating
|
| prEN 10310-2002
| 岸上和海上管路鋼管及配件 雙層環氧樹脂和聚酰胺基涂層的內襯和外襯
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
|
| prEN 10311-1999
| 傳送人類消耗的含水液體（包括水）的鋼管和接頭間的連接件
| Joints for the connection of steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
|
| prEN 10329-2002
| 岸上和海上管路鋼管及配件 外表安裝接頭涂層
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
|
| prEN 2202-1998
| 航空航天系列 經溶液處理和淀積處理的耐熱合金 NI-PH1303 (NiCo20Cr20Mo5Ti2Al) 無縫鋼管 D
| Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al) solution treated - Seamless tube - D 50 mm, a 3 mm
|
| prEN 244-1985
| 腳手架和工作架用4mm壁厚鋼管 要求、試驗
| Steel tubes with 4 mm wall thickness for falsework and working scaffolds; requirements, tests
|
| 編號 | 中文名稱 | 英文名稱 |
|---|