| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 11832-1-1990
| 農場和牲畜飼養設備.輸送液態糞肥的管道用閥門管件.第1部分:最大1巴的靜壓力閘閥
| Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
|
| DIN 11852-2000
| 食品和化學工業用閥門.不銹鋼配件.焊合三通、彎頭和異徑接頭
| Valves for food and chemical industries - Stainless steel fittings - Tees, bends, reducers for welding-on
|
| DIN 12918-1-1999
| 實驗室設備.實驗室管件.第1部分:水閥
| Laboratory equipment - Laboratory fittings - Part 1: Valves for water
|
| DIN 12918-2-2002
| 實驗室設備.實驗室配件.第2部分:燃?xì)忾y門
| Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
|
| DIN 12918-3-2004
| 實驗室設備.實驗室配件.第3部分:工業氣體閥門
| Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases
|
| DIN 12918-4-2004
| 實驗室設備.實驗室配件.第4部分:純氣體閥門
| Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases
|
| DIN 14380-1978
| 標稱壓力為16的壓力限制閥
| Pressure limitation valve, nominal pressure 16
|
| DIN 14381-1999
| B型PN 16 自鎖緊壓力閥
| Pressure valve type B PN 16, self-locking
|
| DIN 14461-1-2003
| 輸送閥裝置.第1部分:帶半剛性管的水龍帶卷繞輪
| Delivery valve installation - Part 1: Hose reel with semi-rigid hose
|
| DIN 14461-2-1989
| 消防水龍帶連接供水閥."干式”揚水管的供水裝置及排水裝置
| Delivery valve installation connected with dry rising fire mains; filling station and output station
|
| DIN 14461-3-2006
| 消防用輸送閥裝置.第3部分:標定壓力PN16的水龍帶連接閥
| Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
|
| DIN 14461-4-1989
| 消防水龍帶連接供水閥."干式”揚水管的供水配件PN16
| Delivery valve installations connected with dry rising fire mains; filling armaturs PN 16
|
| DIN 14461-5-1984
| 與干式滅火上升總管道連接的輸送閥裝置.PN16救火軟管閥
| Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16
|
| DIN 14461-6-1998
| 消防水龍帶閥門裝置.第6部分:扁形消防水龍帶壁裝消防栓箱的尺寸和安裝
| Delivery valve installation - Part 6: Dimensions of cabinets and installation of hose reels with lay-flat hoses according to DIN EN 671-2
|
| DIN 14463-3-2003
| 消防用水設備.遙控注水和排水裝置.地3部分:"濕/干"和"干"滅火管道系統PN16通風閥
| Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 3: Valves for ventilation PN 16 of fire extinguishing pipe systems "wet/dry" and "dry"
|
| DIN 16270-2004
| 壓力表用不帶試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves without test connection for pressure gauges
|
| DIN 16271-2004
| 壓力表用帶試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves with test connection for pressure gauges
|
| DIN 16272-2004
| 壓力表用帶關閉試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves with shut-off test connection for pressure gauges
|
| DIN 16287-2004
| 壓力表用閥門和旋塞的試驗連接用蓋
| Caps for test connection on valves and cocks for pressure gauges
|
| DIN 20040-1990
| 軟管管接頭.連接套管閥.公稱壓力16
| Hose fittings; nipple valves; nominal pressure 16
|
| DIN 20042-2001
| 標稱壓力40的水閥.尺寸和要求
| Watervalve, nominal pressure 40 - Dimensions and requirements
|
| DIN 21556-1987
| 礦井支撐物.單立支撐的閥門.標識代碼
| Mine support; valves for individual props; identification code
|
| DIN 21557-1987
| 礦井支承.動力支承的壓力極限閥.標識代碼
| Mine support; yield valves for powered support; identification code
|
| DIN 21635-1998
| 空氣調節系統.空氣閥門.結構和操作
| Air regulation systems in mining - Air locks - Building and operation
|
| DIN 21636-2003
| 采礦空氣調節系統.帶式輸送機氣閥.尺寸、標識、要求和試驗
| Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing
|
| DIN 24311-1992
| 液壓流體動力.比例控制閥和伺服閥.定義、符號和單位
| Hydraulic fluid power; proportional and servo valves; definitions, symbols, units
|
| DIN 24340-2-1982
| 液壓閥.換向閥用安裝面和連接板
| Hydraulic valves; mounting surfaces and connecting plates for directional control valves
|
| DIN 27205-9-2005
| 鐵路車輛的狀況.制動器.第9部分:駕駛員制動閥、控制裝置和駕駛室中的顯示裝置的功能
| State of railway vehicles - Brake - Part 9: Function of driver's brake valve, control devices and indicators in driver's cabs
|
| DIN 28140-1-2005
| 排泄閥用連接件.第1部分:非合金鋼、不銹鋼或有襯鋼.尺寸配合PN10
| Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10
|
| DIN 28140-2-2005
| 排泄閥用連接件.第2部分:搪玻璃鋼件.連接尺寸PN10
| Connections for bottom discharge valves - Part 2: On glass lined steel; connecting dimensions PN 10
|
| DIN 30690-2 Bb.1-1980
| 煤氣安裝用零部件.第2部分:煤氣器具用閥門的金屬材料要求.材料、強度數據的選用說明
| Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances, notes for selection for materials, strength data
|
| DIN 3160-1974
| 公稱壓力25巴的冷凍電路的直通截止閥
| Through-valves for refrigerant circuits, nominal pressure 25 bar
|
| DIN 3161-1974
| 公稱壓力25巴的冷凍電路的彎管閥
| Elbow valves for refrigerant circuits; nominal pressure 25 bar
|
| DIN 3162-1974
| 公稱壓力25巴的冷凍電路的閥門的螺紋蓋板
| Screwed caps for valves for refrigerant circuits, nominal pressure 25 bar
|
| DIN 3163-1974
| 公稱壓力25巴的冷凍電路的控制直通閥
| Control through valves for refrigerant circuits, nominal pressure 25 bar
|
| DIN 3164-1974
| 冷卻劑循環閥的示位器
| Position indicator for valves for refrigerant circuits
|
| DIN 3174-1-2000
| 呼吸器.鋼瓶閥門.第1部分:壓縮氧氣鋼瓶閥門
| Respiratory equipment - Cylinder valves - Part 1: Cylinder valves for compressed oxygen
|
| DIN 3174-10-1987
| 呼吸器.消防隊用呼吸保護裝置閥門.第10部分:外部尺寸
| Respiratory equipment; valves for respiratory protective devices; for fire brigades; outer dimensions
|
| DIN 3202-4-1982
| 閥門面到面尺寸和中心到面尺寸.第4部分:帶內螺紋連接的閥門
| Face-to-face and centre-to-face dimensions of valves; Valves with female thread connection
|
| DIN 3202-5-1984
| 閥門面到面尺寸和中心到面尺寸.第5部分:壓緊聯軸節連接用閥門
| Face-to-face and centre-to-face dimensions of valves; valves for connection with compression couplings
|
| DIN 3223-1974
| 閥用操作扳手
| Handling keys for valves
|
| DIN 3223/A1-2002
| 閥門用的操作鍵.修改件 A1
| Handling keys for valves; Amendment A1
|
| DIN 3227-2002
| 建筑物飲用水供水閥.角輔助閥.要求和試驗
| Valves for potable water supply in buildings - Angle service valves - Requirements and tests
|
| DIN 3230-4-1977
| 閥門交貨技術條件.飲用水裝置的閥門.要求和檢驗
| Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing
|
| DIN 3236-1-1994
| 分流器法蘭密封管座的直排型閥門.第1部分:無襯
| Straight pattern valves with flange socket placed in shunt - Part 1: Without lining
|
| DIN 3236-2-1996
| 分流器中帶法蘭密封的流量觀查孔玻璃閥門.第1部分:琺瑯襯
| Straight pattern valves with flange socket placed in shunt - Part 2: With enamel lining
|
| DIN 3237-1-1994
| 主電源連接的法蘭密封管座直排型閥門.第1部分:無襯
| Straight pattern valves with flange socket in main power connection - Part 1: Without lining
|
| DIN 3237-2-1994
| 主電源連接的法蘭密封管座直排型閥門.第2部分:帶塑料內襯
| Straight pattern valves with flange socket in main power connection - Part 2: With plastic lining
|
| DIN 3237-3-1996
| 主電源連接裝置帶法蘭密封的流量觀察孔玻璃閥門.第3部分:帶橡膠外皮
| Straight pattern valves with flange socket in main power connection - Part 3: With rubber lining
|
| DIN 3247-1985
| 無止回閥的帶法蘭的吸濾器
| Flanged suction strainers without non-return valve
|
| DIN 3248-1985
| 無止回閥的螺紋連接的吸濾器
| Threaded suction strainers without non-return valve
|
| DIN 3249-1985
| 帶止回閥的螺紋連接的吸濾器
| Threaded suction strainers with non-return valve
|
| DIN 32509-1998
| 焊接、切割及類似工藝用手動關閉閥.結構類型.安全性要求和試驗
| Hand-operated shut-off valves for welding, cutting and allied processes - Type of construction, safety requirements, tests
|
| DIN 3259-1985
| 帶止回閥的帶法蘭的吸濾器(腳閥)
| Flanged suction strainers with non-return valve
|
| DIN 3267-1972
| 水箱沖泄閥用沖洗管
| Flushing tubes for flush-valves
|
| DIN 3280-1988
| 家用供水管道的閥門.公稱壓力 PN 10 以下的錐形連接管.概述
| Valves for domestic water supply; tapered unions up to PN 10; survey
|
| DIN 3281-1988
| 家用供水管道的閥門.公稱壓力10的錐形管子接頭.概述
| Valves for domestic water supply; tapered union nipples nominal pressure 10; survey
|
| DIN 3283-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶內螺紋的廢水排放連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
|
| DIN 3284-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶外螺紋的連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads
|
| DIN 3285-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.軟管連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
|
| DIN 3287-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.管路用帶螺紋的連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes
|
| DIN 3289-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶螺紋的錐形管子接頭
| Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples
|
| DIN 3291-1988
| 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶螺紋的軟管連接管
| Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
|
| DIN 32931-2005
| 充氣娛樂商品和玩具的氣閥和氣閥套.術語、定義、要求和試驗
| Valves and valve adapters for inflatable recreational articles and toys - Terms and definitions, requirements and testing
|
| DIN 3334-1968
| 帶法蘭接頭的加熱裝置用混合閥.標稱壓力為6、最高溫度110 ℃的三通混合閥、四通混合閥.安裝尺寸
| Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions
|
| DIN 3335-1968
| 加熱裝置的帶螺絲端部的混合閥.三通混合閥.四通混合閥.公稱壓力6.使用溫度110 ℃.安裝尺寸
| Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
|
| DIN 3336-1968
| 帶焊接彎管端的加熱裝置的混合閥.公稱壓力6、最大使用溫度110 ℃的三通混合閥、四通混合閥.安裝尺寸
| Mixing valves for heating installations with welding neck ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
|
| DIN 3338-1987
| 多轉的閥門啟動器連接.C形傳動部件的尺寸
| Multi-turn valve actuator attachment; dimensions of type C driving components
|
| DIN 3341-1989
| 容積式壓縮機的板閥.吸氣閥.放氣閥.主要尺寸.材料和安裝
| Plate valves for displacement compressors; suction valves, discharge valves; main dimensions, materials, installation
|
| DIN 3352-5-1980
| 鋼制滑門閥.第5部分:同形系列
| Steel gate valves, isomorphe series
|
| DIN 3356-1-1982
| 球形閥.第1部分:一般數據
| Globe valves; General data
|
| DIN 3357-4-1981
| 滿孔有色金屬球閥
| Full bore nonferrous metal ball valves
|
| DIN 3357-5-1981
| 變徑孔有色金屬球閥
| Reduced bore nonferrous metal ball valves
|
| DIN 3358-1982
| 線性閥門操作機構.配合尺寸
| Linear valve actuator attachment; mating dimensions
|
| DIN 3383-1-1990
| 煤氣軟管組件和連接閥.安全軟管組件、帶有快速連接裝置的安全閥
| Hose assemblies and connection valves for gas; safety hose assemblies, safety valves with quick connecting device
|
| DIN 3394-1-2004
| 自動控制閥.第1部分:壓力為4巴到16巴的減壓安全和調節閥
| Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar
|
| DIN 3394-3-2004
| 自動控制閥.第3部分:壓力為4巴及以下的0級減壓安全閥
| Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar
|
| DIN 3399-1986
| 燃?xì)獾蛪航刂归y.安全性要求和試驗
| Gas low-pressure cut-off valves; safety requirements, testing
|
| DIN 3430-1986
| 燃?xì)忾y.角型球截止閥
| Gas valves; angle pattern ball shut-off valves
|
| DIN 3431-1986
| 燃?xì)忾y門.壓力連接的角型球截止閥
| Gas valves; angle pattern ball shut-off valves with compression coupling
|
| DIN 3432-1986
| 燃?xì)忾y門..壓力連接的直型球截止閥
| Gas valves; straight pattern ball shut-off valves with compression coupling
|
| DIN 3475-1993
| 未處理水和可飲用水用的球墨鑄鐵管閥和管接頭.內部涂搪瓷防腐蝕.質量要求和試驗
| Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing
|
| DIN 3476-1996
| 生水和飲用水用閥門和接頭.粉漆及環氧內涂防腐層.要求和檢驗
| Valves and fittings for untreated and potable water - Protection against corrosion by internal epoxy coating of coating powders (P) or liquid varnishes (F) - Requirements and tests
|
| DIN 3500-1990
| 家用供水裝系統的截流閥.PN10 活塞式滑閥
| PN 10 piston type gate valves for use in drinking water supply systems
|
| DIN 3502-2002
| 家庭用供水截流閥.雙通閥.傾斜式閥帽P(pán)N10型.Y型閥.DVGW技術規則
| Stopvalves for domestic water supply - Two-way valves - Oblique bonnet type PN 10; Y-type valve; Technical rule of the DVGW
|
| DIN 3509-1981
| 供水閥二維特性.PN10型水龍頭
| Valves for water supply dimensional characteristics; taps PN 10
|
| DIN 3512-2002
| 家庭用供水截流閥.雙路閥.立式閥帽型PN10:直線型球形閥:DVGW的技術規則
| Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW
|
| DIN 3528-1986
| 煤氣裝置用閥門.帶密封墊的噴嘴
| Valves for gas installations; nozzles with gasket
|
| DIN 3529-1982
| 氣體裝置閥.內螺紋連接端直通型旋塞
| Valves for gas installations; straight pattern stop cocks female threaded ends
|
| DIN 3532-1981
| 煤氣裝置用閥門.角度型旋閥
| Valves for gas installations; angle pattern stop cocks
|
| DIN 3533-1981
| 煤氣裝置用閥門.帶壓力接頭的角度型旋閥
| Valves for gas installations; angle pattern stop cocks with compression fitting
|
| DIN 3534-1982
| 氣體裝置閥.帶壓緊接頭的直通型龍頭
| Valves for gas installations; straight pattern taps with compression fitting
|
| DIN 3535-1-1991
| 煤氣供氣密封件:家用設備煤氣閥門用彈性密封材料:要求和檢驗
| Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
|
| DIN 3535-6-1999
| 供氣用密封墊.第6部分:氣閥、煤氣設備和煤氣主管道用基于合成纖維、石墨或聚四氟乙烯的密封墊材料
| Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
|
| DIN 3536-1994
| 室內設備、煤氣分配和煤氣輸送管道的煤氣閥用潤滑劑
| Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines
|
| DIN 3538-1986
| 煤氣裝置閥門.蝶型閥.內螺紋接頭
| Valves for gas installations; butterfly valves; female threaded ends
|
| DIN 3543-1-1984
| 金屬排放閥.要求、檢驗
| Metal tapping valves; requirements, testing
|
| DIN 3543-2-1984
| 金屬攻絲斷流閥.尺寸
| Metallic tapping stop valves; dimensions
|
| DIN 3543-3-1978
| 塑料管用PVC排放閥.尺寸
| PVC tapping valves for plastic pipes; dimensions
|
| DIN 3543-4-1984
| 高密度管道用高密度聚乙烯排放閥.尺寸
| High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
|
| DIN 3546-1-2002
| 家庭用供水截流閥.第1部分:放水閥、門閥和隔膜閥用截流閥、手動式活塞型門閥用一般要求和試驗.DVGW的技術規
| Stopvalves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves; Technical rule of the DVGW
|
| DIN 3548-1-1993
| 帶法蘭凝汽閥
| Flanged steam traps
|
| DIN 3581-1990
| 氣體管道.1號規格的管閥箱
| Gas pipelines; size 1 valve box
|
| DIN 3582-1990
| 氣體管道.2號規格的管閥箱
| Gas pipelines; size 2 valve box
|
| DIN 3583-1990
| 氣體管道.3號規格的管閥箱
| Gas pipelines; size 3 valve box
|
| DIN 3584-1990
| 氣體管道.4號規格的管閥箱
| Gas pipelines; size 4 valve box
|
| DIN 3585-1990
| 氣體管道.5號規格的管閥箱
| Gas pipelines; size 5 valve box
|
| DIN 3842-1979
| PN 10加熱設備閥門.尺寸.材料.結構
| Valves for heating installations, PN 10; dimensions, materials, design
|
| DIN 3844-1981
| 供暖設備用閥.帶螺紋承插口的銅合金制PN16球閥.尺寸、材料
| Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets; dimensions, materials
|
| DIN 3848-1981
| 供暖設備閥.PN12.5 注水和排氣開關.尺寸.材料
| Valves for heating installations; filling and evacuating taps PN 12.5; dimensions, materials
|
| DIN 3852-1-2002
| 配件和閥門用螺柱端和孔.第1部分:帶公制小螺距螺紋螺塞.一般外置型
| Stud ends, ports, for fittings, valves - Part 1: Plug screw with metric fine pitch thread; General outlay of types
|
| DIN 3852-11-1994
| 壓合接頭、閥門、螺旋塞和E型螺紋管堵用螺紋管堵和螺紋孔.設計尺寸
| Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions
|
| DIN 3852-2-2000
| 管件和閥門用管堵和螺紋孔.帶惠氏管螺紋的螺塞.各類的總成本
| Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types
|
| DIN 4000-13-1987
| 閥門用產品特性圖表
| Tabular layouts of article characteristics for valves
|
| DIN 4055-1992
| 水管.地下消防栓的閥門室.DVGW實施規程
| Water pipelines; valve box for underground hydrants; DVGW code of practice
|
| DIN 4056-1992
| 水管.截止閥門室.DVGW實施規程
| Water pipelines; valve boxes for stop valves; DVGW code of practice
|
| DIN 4057-1992
| 水管.放水閥門室.DVGW實施規程
| Water pipelines; valve box for tapping valves; DVGW code of practice
|
| DIN 40741-1-1999
| 鉛酸蓄電池.工業用帶有正柵極板的固定閥穩定蓄電池和固定電解質.額定電容、主要尺寸和重量
| Lead-acid batteries - Stationary valve regulated batteries with positive grid plates and immobilized electrolyte for industrial application - Rated capacities, main dimensions, weights
|
| DIN 42568-1982
| 變壓器.取樣和排放用15和32公稱內徑的放出閥
| Transformers; outlet valve DN 15 and DN 32 for sampling and discharge
|
| DIN 43689-1977
| 電氣開關裝置中空氣壓縮裝置用40(570 psig)和64 (911 psig)斷流閥.
| Shut-off valves 40 (570 psig) and 64 (911 psig) for compressed-air installations in electrical switching plants
|
| DIN 45635-50-1987
| 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.閥門
| Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves
|
| DIN 475-1-1984
| 第1部分:螺栓、螺釘、閥門和配件用扳手開口度
| Widths across flats for bolts, screws, valves and fittings
|
| DIN 477-4-1982
| 壓力氣瓶閥.野營用儲氣瓶的旋轉止回閥
| Compressed gas cylinder valves; swing check valves for camping-cylinders
|
| DIN 477-5-2002
| 氣瓶閥.第5部分:最大試驗壓力為450巴.出口接頭
| Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections
|
| DIN 4817-1-1981
| 液化氣截止閥.定義、要求、試驗和標記
| Shut off valves for liquefied gases; definitions, requirement, testing, marking
|
| DIN 5589-1990
| 有軌車輛的壓縮空氣裝置.安全閥.安裝和連接尺寸及要求
| Compressed air equipment for rail vehicles; safety valves; mounting and connecting dimensions, requirements
|
| DIN 5593-1994
| 鐵路車輛用壓縮空氣裝置.止回閥.安裝和連接尺寸
| Compressed air equipment for rail vehicles - Check valves - Installation and companion dimensions
|
| DIN 5594-1994
| 鐵路車輛用壓縮空氣裝置.雙止回閥.安裝和連接尺寸
| Compressed air equipment for rail vehicles - Double check valves - Installation and companion dimensions
|
| DIN 58362-7-2002
| 輸液.輸液器和附件.第7部分:止回閥
| Infusion - Infusion equipment and accessories - Part 7: Check valves
|
| DIN 58600-2003
| 呼吸保護器.德國消防隊用自調需氧量氧氣調節閥與獨立開路壓縮空氣呼吸器面罩之間的插塞連接
| Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade
|
| DIN 6273-1973
| 內燃機.指示閥
| Internal combustion engines; indicator valves
|
| DIN 6274-1982
| 通用內燃機.帶閥門組的壓縮空氣罐.內徑為38mm.裝配
| Internal combustion engines for general purposes; Compressed air containers with valve block; 38 mm bore; Assembly
|
| DIN 6276-1982
| 通用內燃機.壓縮空氣罐的閥門組.內徑為38mm
| Internal combustion engines for general purposes; Valve blocks for compressed air containers; 38 mm bore
|
| DIN 71401-1-1985
| 內燃機排氣閥.不用于新設計
| Drain cocks for internal combustion engines; not to be used for new designs
|
| DIN 73368-1986
| 燃料噴射裝置的溢流閥和空心螺釘
| Overflow valves and hollow screw for fuel injection devices
|
| DIN 74279-2001
| 氣壓制動系統.過流閥
| Air braking systems - Charging valves
|
| DIN 74280-1998
| 空氣制動系統.止回閥
| Air braking systems - Check valve
|
| DIN 74341-1987
| 氣壓制動系統.回流循環閥
| Air braking systems; shuttle valve with backflow
|
| DIN 7786-1977
| 內胎氣門.有旋轉閥體的單彎結構輪胎氣門
| Tube valves; swivel type tyre valve, single bend form
|
| DIN 78026-1978
| 無內胎的車輪氣門閥.充空氣 － 水用的金屬座式氣門閥
| Valves for tubeless tyres; metal base type for air-waterfilling
|
| DIN 85003-1-1997
| 船用閥門技術規范.第1部分:總則
| Technical specifications for valves for shipboard use - Part 1: General
|
| DIN 85003-2-1997
| 船用閥門技術規范.第2部分:可能提出的要求和試驗方法
| Technical specifications for valves for shipboard use - Part 2: Survey of possible requirements and methods of test
|
| DIN 85003-3-1997
| 船用閥門技術規范.第3部分:蝶閥
| Technical specifications for valves for shipboard use - Part 3: Butterfly valves
|
| DIN 85003-4-1997
| 船用閥門技術規范.第4部分:停止閥
| Technical specifications for valves for shipboard use - Part 4: Stop valves
|
| DIN 85003-5-1997
| 船用閥門技術規范.第5部分:截止止回閥
| Technical specifications for valves for shipboard use - Part 5: Cutt off type non return valves
|
| DIN 85003-6-1997
| 船用閥門技術規范.第6部分:手動停止閥
| Technical specifications for valves for shipboard use - Part 6: Hand operated gate valves
|
| DIN 85003-7-1997
| 船用閥門技術規范.第7部分:隔膜閥
| Technical specifications for valves for shipboard use - Part 7: Diaphragm valves
|
| DIN 85003-8-1999
| 船用閥門技術規范.第8部分:球閥
| Technical specifications for valves for shipboard use - Part 8: Ball valves
|
| DIN 86066-2002
| 止回閥用鑄鋼焊接彎頭.根據PN 10的連接尺寸 DN 50至150
| Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10
|
| DIN 86211-1991
| 公稱壓力（PN）16、帶C或B型消防軟管管接頭和帶法蘭連接的滅火閥
| Fire valves for PN 16, with fire hose couplings type C or B and with flange connection
|
| DIN 86251-1998
| 造船用DN15至500規格的帶法蘭的鑄鐵截止閥
| Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500
|
| DIN 86252-1998
| 造船用DN15至500規格的帶法蘭的鑄鐵單向閥
| Non return valves for shipboard use, cutt off type, of cast iron, with flanges, DN 15 to 500
|
| DIN 86259-2000
| 船只及造船技術.超輕型DN32-DN125(PN10)凸緣閘閥
| Ships and marine technology - Flanged gate valves extra light duty DN 32 to DN 125, PN 10
|
| DIN 86260-1998
| 造船用DN15至500規格的帶法蘭的炮銅截止閥
| Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500
|
| DIN 86261-1998
| 造船用DN15至500規格的帶法蘭的截止型炮銅單向閥
| Non return valves for shipboard use, cutt off type, of gun metall, with flanges, DN 15 to 500
|
| DIN 86263-2000
| Y型,軟密封,承口連接的船用直通閥.DN15-DN50,PN16
| Straight way valves for shipboard use - Y-patten, soft sealing, with socket connection - DN 15 to DN 50, PN 16
|
| DIN 86264-2000
| Y型,軟密封,帶法蘭的短型船用直通閥.DN15-DN200
| Straight way valves for shipboard use - Y-patten, soft sealing, short type with flanges - DN 15 to DN 200
|
| DIN 86265-2000
| Y型,軟密封,普通型帶法蘭的船用直通閥.DN15-DN200
| Straight way valves for shipboard use - Y-patten, soft sealing, normal type, with flanges - DN 15 to DN 200
|
| DIN 86501-2002
| 符合DIN 3861的與W出口端成24度連接的炮銅制螺紋帽狀閥門
| Valves, screwed bonnet type of gun metal with 24°-connection with port end W according to DIN 3861
|
| DIN 86528-1996
| 螺蓋閥的鎖緊墊板圈
| Tab washers for screwed bonnet valves
|
| DIN 86552-2002
| 符合DIN 3861的與W出口端成24度連接的鋼制螺紋帽狀閥門
| Valves, screwed bonnet type of steel with 24°-connection with port end W according to DIN 3861
|
| DIN 86720-2002
| 帶螺紋的閥帽和法蘭DN 20 至 DN 100、PN 16 的炮銅制楔形滑門閥
| Gate valves flat sided of gun metall with screwed bonnet and flanges, DN 20 to DN 100, PN 16
|
| DIN 87101-2003
| DN為50-150、標稱壓力為1的垂直自閉式止回閥(止回排水閥).標稱壓力為10的法蘭的配合尺寸
| Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10
|
| DIN 87303-2000
| 船上閥用帶有錐形和平行面的直角器
| Squares with tapered and parallel sides for valves for shipboard use
|
| DIN 87308-1999
| 船上用閥門的操作裝置.帶錐形側面的四方孔手搖曲柄
| Operating devices for valves for shipboard use - Crank handles with square hole with tapered sides
|
| DIN 87901-2001
| 泵用雙向安全閥
| Sniffle valves for pumps
|
| DIN 8905-3-1983
| 帶密封和半密封壓縮機的制冷系統用管道.毛細節流閥的補充交貨技術條件
| Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes
|
| DIN EN 10090-1998
| 內燃機閥門用鋼及合金
| Valve steels and alloys for internal combustion engines; German version EN 10090:1998
|
| DIN EN 1074-1-2000
| 供水用閥門.適用性要求和專用驗證試驗.第1部分:一般要求
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements; German version EN 1074-1:2000
|
| DIN EN 1074-2-2004
| 供水用閥門.適用性要求和適當?shù)尿?yàn)證試驗.第2部分:隔離閥
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves; German version EN 1074-2:2000 + A1:2004
|
| DIN EN 1074-3-2000
| 供水用閥門.目的要求和專用檢查試驗的合理性.第3部分:止回閥
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000
|
| DIN EN 1074-4-2000
| 供水用閥門.目的要求適用性和適用驗證試驗.第4部分:空氣閥
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves; German version EN 1074-4:2000
|
| DIN EN 1074-5-2001
| 供水閥門.適用性要求和適配試驗.第5部分:控制閥門
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001
|
| DIN EN 1074-6-2004
| 供水用閥門.適用性要求和相應的檢查試驗.第6部分:給水栓
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants; German version EN 1074-6:2004
|
| DIN EN 1092-1-2002
| 法蘭及其連接件.管道、閥門、配件和附件用圓形法蘭.第1部分:用PN標注的鋼制法蘭; 德文版本 EN 1092-1:2001
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated; German version EN 1092-1:2001
|
| DIN EN 1092-3-2004
| 法蘭及其連接件.PN標注的管道、閥門、配件和附件用圓形法蘭.第3部分:銅合金法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
|
| DIN EN 1092-4-2002
| 法蘭及其連接件.按PN標志的管道、閥門、配件和附件用圓形法蘭.第4部分:鋁合金法蘭; 德文版本 EN 1092-4:200
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges; German version EN 1092-4:2002
|
| DIN EN 1111-1998
| 衛生設備管件.恒溫混合閥(PN 10).通用技術規范
| Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
|
| DIN EN 1171-2003
| 工業閥門.鑄鐵閘閥
| Industrial valves - Cast iron gate valves; German version EN 1171:2002
|
| DIN EN 12050-4-2001
| 建筑物和施工場地廢水提升裝置.制造和試驗原理.第4部分:無糞便廢水和含糞便廢水單向閥
| Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter; German version EN 12050-4:2000
|
| DIN EN 12094-13-2001
| 固定式消防系統.氣體滅火系統用部件.第13部分:止回閥和非止回閥的要求和試驗方法; 德文版本 EN 12094-13:20
| Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves; German version EN 12094-13:2001
|
| DIN EN 12094-4-2004
| 固定式消防系統.氣體滅火系統用元件.第4部分:容器閥組件及其傳動裝置的要求和試驗方法
| Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004
|
| DIN EN 12094-5-2006
| 固定式消防系統.氣體滅火系統元件.第5部分:高和低壓力選擇器閥及其啟動器的要求和試驗方法
| Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators; German version EN 12094-5:2006
|
| DIN EN 12100-1997
| 塑料管道系統.聚乙烯(PE)閥.三點負載抗彎曲試驗方法
| Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
|
| DIN EN 12107-1997
| 塑料管道系統.注塑熱塑性塑料配件、閥門和附件.注塑熱塑材料管件持久靜液壓強度的測定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
|
| DIN EN 12117-1997
| 塑料管道系統.配件、閥門和附件.氣流和壓降關系的測定
| Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships; German version EN 12117:1997
|
| DIN EN 1213-1999
| 建筑閥門.建筑物飲用水銅合金截止閥.試驗和要求
| Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999
|
| DIN EN 12201-4-2002
| 供水用塑料管系統.聚乙烯(PE).第4部分:閥; 德文版本 EN 12201-4:20
| Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves; German version EN 12201-4:2001
|
| DIN EN 12259-2-2001
| 固定滅火系統.噴頭和噴水系統元部件.第2部分:報警濕閥組件
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies (includes Amendment A1:2001); German version EN 12259-2:1999 + A1:2001
|
| DIN EN 12259-2/A2-2006
| 固定滅火系統.噴頭和噴水系統元部件.第2部分:報警濕閥組件.德文版本 EN 12259-2-1999/A2-2005
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies; German version EN 12259-2:1999/A2:2005
|
| DIN EN 12259-3-2001
| 固定滅火系統.噴頭和噴水系統元部件.第3部分:報警干閥組件
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies (includes Amendment A1:2001); German version EN 12259-3:2000 + A1:2001
|
| DIN EN 12259-3/A2-2006
| 固定式消防系統.噴頭和噴水系統用部件.第3部分:報警干閥組件; 德文版本 EN 12259-3-2000/A2-2005
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies; German version EN 12259-3:2000/A2:2005
|
| DIN EN 12266-1-2003
| 工業用閥門.閥門試驗.第1部分:壓力試驗、試驗程序和驗收準則.強制性要求
| Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2003
|
| DIN EN 12266-2-2003
| 工業用閥門.閥門測試.第2部分:試驗、試驗規程和驗收標準.補充要求
| Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements; German version EN 12266-2:2002
|
| DIN EN 12284-2004
| 制冷系統和熱泵.閥.要求、檢驗和標記
| Refrigerating systems and heat pumps - Valves - Requirements, testing and marking; German version EN 12284:2003
|
| DIN EN 12288-2003
| 工業閥門.銅合金閘閥
| Industrial valves - Copper alloy gate valves; German version EN 12288:2003
|
| DIN EN 12334-2004
| 工業閥門.鑄鐵止回閥
| Industrial valves - Cast iron check valves; German version EN 12334:2001 + A1:2004
|
| DIN EN 12351-1999
| 工業閥門.帶法蘭聯接的閥門用護罩.德文標準12351:1999
| Industrial valves - Protective caps for valves with flanged connections; German version EN 12351:1999
|
| DIN EN 12380-2003
| 排水系統通氣閥.要求、試驗方法和合格評定
| Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity; German version EN 12380:2002
|
| DIN EN 12514-2-2000
| 油燃燒器供油系統的安裝.第1部分:安全要求和試驗.部件,閥門管道,過濾器,油氣分離器,油量計
| Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000
|
| DIN EN 12516-1-2005
| 工業用閥.外殼設計強度.第1部分:鋼閥外殼用造表方法
| Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells; German version EN 12516-1:2005
|
| DIN EN 12516-2-2004
| 工業用閥.外殼設計強度.第2部分:鋼閥外殼的計算方法
| Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells; German version EN 12516-2:2004
|
| DIN EN 12516-3-2003
| 閥門.外殼設計強度.第3部分:實驗方法; 德文版本 EN 12516-3:2002
| Valves - Shell design strength - Part 3: Experimental method; German version EN 12516-3:2002
|
| DIN EN 12541-2003
| 衛生便池.壓力沖洗閥和自動關閉沖水閥
| Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10; German version EN 12541:2002
|
| DIN EN 12567-2000
| 工業閥門.液化天然氣用隔離閥.適用性及適用驗證試驗規范
| Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests; German version EN 12567:2000
|
| DIN EN 12569-2001
| 工業閥門.化學和石油化工工業用閥門.要求和試驗
| Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests (includes Corrigendum AC:2000); German version EN 12569:1999 + AC:2000
|
| DIN EN 12570-2000
| 工業閥門.操作元件尺寸控制方法
| Industrial valves - Method for sizing the operating element; German version EN 12570:2000
|
| DIN EN 12627-1999
| 工業閥門.鋼閥門用對焊端頭
| Industrial valves - Butt welding ends for steel valves; German version EN 12627:1999
|
| DIN EN 1267-1999
| 閥門.以水作試驗流體的流動阻力試驗
| Valves - Test of flow resistance using water as test fluid; German version EN 1267:1999
|
| DIN EN 12760-1999
| 閥門.鋼閥門的承口焊接端頭
| Valves - Socket welding ends for steel valves; German version EN 12760:1999
|
| DIN EN 1286-1999
| 衛生器具管件.低壓機械調混合閥.通用技術規范
| Sanitary tapware - Low pressure mechanical mixing valves; general technical specification; German version EN 1286:1999
|
| DIN EN 1287-1999
| 衛生器具管件.低壓恒溫混合閥.通用技術規范
| Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999
|
| DIN EN 12982-2000
| 工業閥門.鉸鏈焊接端閥門端對端和中心對末端尺寸
| Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves; German version EN 12982:2000
|
| DIN EN 13082-2001
| 危險貨物運輸罐.運輸罐配套設備.蒸汽傳輸閥門
| Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve; German version EN 13082:2001
|
| DIN EN 13152-2003
| 自閉合式液化石油氣儲氣瓶閥的規范和檢驗
| Specification and testing of LPG cylinder valves - Self closing (includes Amendment A1:2003); German version EN 13152:2001 + A1:2003
|
| DIN EN 13153-2003
| 手工操作的液化石油氣瓶閥門的規范和試驗
| Specification and testing for liquefied petroleum gas (LPG) cylinder valves - Manually operated (includes Amendment A1:2003); German version EN 13153:2001 + A1:2003
|
| DIN EN 13175-2005
| 液化石油氣(LPG)罐閥門及配件的規范和試驗
| Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings; German version EN 13175:2003 + A1:2005
|
| DIN EN 13244-4-2003
| 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第4部分:閥門
| Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves; German version EN 13244-4:2002
|
| DIN EN 13308-2003
| 危險物品運輸槽罐車.槽罐車輔助設備.無壓平衡底閥
| Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve; German version EN 13308:2002
|
| DIN EN 13312-5-2001
| 生物技術.管路和儀器性能準則.第5部分:閥門
| Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves; German version EN 13312-5:2001
|
| DIN EN 13316-2003
| 危險物品運輸槽罐車.槽罐車輔助設備.壓力平衡底閥
| Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002
|
| DIN EN 13397-2002
| 工業用閥門.金屬材料制隔膜閥門; 德文版本 EN 13397:2001
| Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001
|
| DIN EN 1349-2000
| 工業過程控制閥門
| Industrial process control valves; German version EN 1349:2000
|
| DIN EN 13617-3-2004
| 加油站.第3部分:剪閥的建造和性能的安全要求
| Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves; German version EN 13617-3:2004
|
| DIN EN 13648-1-2002
| 冷凝容器.超壓保護設施.第1部分:冷凝設備安全閥
| Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service; German version EN 13648-1:2002
|
| DIN EN 13709-2003
| 工業用閥.鋼制球閥、球狀截止閥和止回閥
| Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002
|
| DIN EN 13774-2003
| 最大工作壓力為16bar及以下的配氣系統用閥.性能要求
| Valves for gas distribution systems with maximum operating pressure 16 bar - Performance requirements; German version EN 13774:2003
|
| DIN EN 13786-2004
| 丁烷、丙烷或其混合物用最大輸出壓力4巴以下(包括4巴)和最大容量100 kg/h以下(包括100 kg/h)的自動轉換閥及
| Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 13786:2004
|
| DIN EN 13789-2003
| 工業用閥.鑄鐵球閥
| Industrial valves - Cast iron globe valves; German version EN 13789:2002
|
| DIN EN 13792-2002
| 實驗室用旋塞和閥門的顏色編碼; 德文版本 EN 13792:2002
| Colour coding of taps and valves for use in laboratories; German version EN 13792:2002
|
| DIN EN 13828-2003
| 建筑物用閥.建筑物內飲用水供應用手動銅合金和不銹鋼球閥.試驗和要求
| Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003
|
| DIN EN 13942-2005
| 石油和天然氣工業.管道輸送系統.管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003
|
| DIN EN 13953-2003
| 液化石油氣(LPG)用可運輸?shù)脑俪涫絻?chǔ)氣瓶的減壓閥
| Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG); German version EN 13953:2003
|
| DIN EN 13959-2005
| 防污止回閥.包括DN 6至DN 250.E系列A、B、C、D型
| Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004
|
| DIN EN 14071-2005
| LPG罐用減壓閥.輔助設備
| Pressure relief valves for LPG tanks - Ancillary equipment; German version EN 14071:2004
|
| DIN EN 14124-2005
| 帶內溢水口的沖洗水箱用入口閥
| Inlet valves for flushing cisterns with internal overflow; German version EN 14124:2004
|
| DIN EN 14129-2005
| LPG罐用減壓閥
| Pressure relief valves for LPG tanks; German version EN 14129:2004
|
| DIN EN 14141-2004
| 天然氣輸送管道用閥門.性能要求和試驗
| Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2003
|
| DIN EN 14189-2003
| 可運輸儲氣瓶.儲氣瓶定期檢查時氣瓶閥的檢查和維修
| Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders; German version EN 14189:2003
|
| DIN EN 144-1-2005
| 呼吸保護器.氣瓶閥門.第1部分:旋入式連接器的螺紋連接
| Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector; German version EN 144-1:2000 + A1:2003 + A2:2005
|
| DIN EN 144-2-1999
| 呼吸防護裝置.氣瓶閥門.第2部分:出口連接件
| Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections; German version EN 144-2:1998
|
| DIN EN 144-3-2003
| 呼吸保護器.氣瓶閥門.第3部分:潛水用硝基氣體和氧氣氣瓶的出口連接件
| Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen; German version EN 144-3:2003
|
| DIN EN 14432-2006
| 危險貨物運輸用容器.液體化學物品運輸?shù)娜萜髟O(shè)備.貨物卸載和空氣進給閥
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves; German version EN 14432:2006
|
| DIN EN 14433-2006
| 危險貨物運輸用容器.液體化學物品運輸?shù)娜萜髟O(shè)備.腳踩閥
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves; German version EN 14433:2006
|
| DIN EN 14451-2005
| 防飲用水回流污染的裝置.直通反回流閥DN 8至DN 80. A型D系列
| Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A; German version EN 14451:2005
|
| DIN EN 14455-2005
| 防飲用水回流污染的裝置.壓縮空氣進氣閥DN15至DN 50. A型和B型L系列
| Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B; German version EN 14455:2005
|
| DIN EN 1452-4-1999
| 供水用塑料管道系統.未增塑聚氯乙烯.第4部分:閥門和輔助設備
| Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment; German version EN 1452-4:1999
|
| DIN EN 14529-2006
| 呼吸保護裝置.逃生用包含由需求閥控制的正壓呼吸器的帶半罩式面具的自持式開路壓縮空氣呼吸機
| Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only; German version EN 14529:2005
|
| DIN EN 14593-1-2005
| 呼吸保護裝置.帶斷續供氧閥門的壓縮氣體管路呼吸裝置.第1部分:帶全罩式面具的裝置.要求、試驗、標記
| Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking; German version EN 14593-1:2005
|
| DIN EN 14593-2 Berichtigung 1-2006
| 呼吸器保護裝置.帶斷續供養閥門的壓縮氣體管路呼吸裝置.第2部分:帶增壓半罩式面具的裝置.要求、試驗、標記.
| Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking; German version EN 14593-2:2005, Corrigenda to DIN EN 14593-2:2005-07; German version EN 14593-2:2005/AC:2005
|
| DIN EN 14593-2-2005
| 呼吸器保護裝置.帶斷續供氧閥門的壓縮氣體管路呼吸裝置.第2部分:帶增壓半罩式面具的裝置.要求、試驗、標記
| Respiratory protective devices - Compressed air line breathing with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking; German version EN 14593-2:2005
|
| DIN EN 14596-2005
| 危險物品運輸罐.罐的輔助設備.應急減壓閥
| Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve; German version EN 14596:2005
|
| DIN EN 14848-2006
| 氣溶膠容器.25.4 mm孔徑的金屬容器.閥座尺寸.德文版本 EN 14848-2005
| Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups; German version EN 14848:2005
|
| DIN EN 14849-2006
| 氣溶膠容器.玻璃容器.氣溶膠閥箍尺寸.德文版本 EN 14849-2005
| Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules; German version EN 14849:2005
|
| DIN EN 1487-2000
| 建筑物閥門.液壓安全類.試驗和要求
| Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000
|
| DIN EN 1488-2000
| 建筑物閥門.膨脹類.試驗和要求
| Building valves - Expansion groups - Tests and requirements; German version EN 1488:2000
|
| DIN EN 1489-2000
| 建筑物閥門.壓力安全閥門.試驗和要求
| Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000
|
| DIN EN 1490-2000
| 建筑物閥門.組合型溫度壓力安全閥.試驗和要求
| Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000
|
| DIN EN 1491-2000
| 建筑物閥門.膨脹閥門.試驗和要求
| Building valves - Expansions valves - Tests and requirements; German version EN 1491:2000
|
| DIN EN 14912-2006
| LPG設備和組件.在鋼瓶的定期檢查中液化石油氣瓶閥的檢查和維修.德文版本EN 14912-2005
| LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders; German version EN 14912:2005
|
| DIN EN 1503-1-2001
| 閥門.閥體、閥蓋和閥套用材料.第1部分:歐洲標準規定的鋼
| Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European standards; German version EN 1503-1:2000
|
| DIN EN 1503-2-2001
| 閥門.閥體、閥蓋和閥套材料.第2部分:歐洲標準中沒有規定的鋼
| Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified; German version EN 1503-2:2000
|
| DIN EN 1503-3-2001
| 閥門.閥體、閥蓋和閥套材料.第3部分:歐洲標準規定的鑄鐵
| Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European standards; German version EN 1503-3:2000 + AC:2001
|
| DIN EN 1503-4-2003
| 閥門.閥體、閥蓋和閥套材料.第3部分:歐洲標準規定的銅合金
| Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards; German version EN 1503-4:2002
|
| DIN EN 1555-4-2003
| 氣體燃料塑料管道供氣系統.聚乙烯(PE).第4部分:閥門
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves; German version EN 1555-4:2002
|
| DIN EN 1567-2000
| 建筑物閥門.水減壓閥和組合水減壓閥.要求和試驗
| Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999
|
| DIN EN 161-2002
| 氣體燃燒器和燃?xì)馄骶哂米詣?dòng)關閉閥; 德文版本 EN 161:2001
| Automatic shut-off valves for gas burners and gas appliances; German version EN 161:2001
|
| DIN EN 1626-1999
| 低溫容器.低溫條件使用閥門
| Cryogenic vessels - Valves for cryogenic service; German version EN 1626:1999
|
| DIN EN 1643-2001
| 燃?xì)馊紵骱腿細庥镁哂米詣?dòng)截止閥的閥門檢驗系統
| Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000
|
| DIN EN 1680-1997
| 塑料管道系統.聚乙烯(PE)管道系統用閥門.操作機構彎曲時和彎曲后密封性試驗方法
| Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
|
| DIN EN 1704-1997
| 塑料管道系統.熱塑管道系統用閥門.彎曲加溫度循環后閥門完好性測試方法
| Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
|
| DIN EN 1705-1997
| 塑料管道系統.熱塑閥門.外部沖擊后閥門完好性試驗方法
| Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996
|
| DIN EN 1759-1-2005
| 法蘭及其連接件.等級標示的管、閥、配件和附件用圓形法蘭.第1部分:鋼法蘭.NPS 1/2至24
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24; German version EN 1759-1:2004
|
| DIN EN 1759-3-2004
| 法蘭及其接頭.等級標示的管、閥、配件和附件用圓形法蘭.第3部分:銅合金法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
|
| DIN EN 1759-4-2003
| 法蘭及其接頭.指定類別的管、閥、配件和附件用圓形法蘭.第4部分:鋁合金法蘭
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges; German version EN 1759-4:2003
|
| DIN EN 1827-1999
| 呼吸防護裝置.不帶吸入閥門和帶氣體、含塵粒氣體或純塵粒分立式過濾器的半罩式面具.要求、檢測、標識
| Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking; German version EN 1827:1999
|
| DIN EN 19-2002
| 工業用閥門.金屬閥標志; 德文版本 EN 19:2002
| Industrial valves - Marking of metallic valves; German version EN 19:2002
|
| DIN EN 1964-2-2002
| 可運輸氣瓶.水容量為0.5升到150升(含150升)的可再填充可運輸無縫鋼瓶設計和制造規范.第2部分:閥門壓力R<上
| Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R<(Index)m> value of 1100 MPa and above; German version EN 1964-2:2001
|
| DIN EN 1983-2006
| 工業閥門.鋼制球閥
| Industrial valves - Steel ball valves; German version EN 1983:2006
|
| DIN EN 1984-2000
| 工業閥門.鋼門閥門
| Industrial valves - Steel gate valves; German version EN 1984:2000
|
| DIN EN 200-2005
| 衛生設備管件.單排閥和混合閥(PN 10).一般技術規范
| Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification; German version EN 200:2004
|
| DIN EN 215-2006
| 恒溫散熱器閥.要求和試驗方法
| Thermostatic radiator valves - Requirements and test methods; German version EN 215:2004 + A1:2006
|
| DIN EN 26554-1991
| 法蘭連接的自動凝汽閥.面與面結合尺寸(ISO 6554-80)
| Flanged automatic steam traps; face-to-face dimensions (ISO 6554:1980); german version EN 26554:1991
|
| DIN EN 26704-1991
| 自動蒸汽閥.分類
| Automatic steam traps; classification (ISO 6704:1982); german version EN 26704:1991
|
| DIN EN 26948-1991
| 自動凝汽閥.生產和性能特征試驗.(ISO 6948-81)
| Automatic steam traps; production and performance characteristic tests (ISO 6948:1981); german version EN 26948:1991
|
| DIN EN 27841-1991
| 自動凝汽閥.蒸汽損失的測定.試驗方法.(ISO 7841-88)
| Automatic steam traps; determination of steam loss; test methods (ISO 7841:1988); german version EN 27841:1991
|
| DIN EN 27842-1991
| 自動凝汽閥.排流量的測定.試驗方法.(ISO 7842-88)
| Automatic steam traps; determination of discharge capacity; test methods (ISO 7842:1988); german version EN 27842:1991
|
| DIN EN 28233-1991
| 熱塑性塑料閥.扭矩.試驗方法(ISO 8233-88)
| Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
|
| DIN EN 28659-1991
| 熱塑性塑料閥.疲勞強度.試驗方法(ISO 8659-88)
| Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990
|
| DIN EN 331-1999
| 建筑物燃?xì)庠O(shè)備上的手動球閥和底部關閉錐形塞閥
| Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings; German version EN 331:1998
|
| DIN EN 405-2002
| 呼吸保護設備.防煤氣或防煤氣與粉塵的帶閥過濾半罩式面罩.要求、檢驗、標記; 德文版本 EN 405:2001
| Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; German version EN 405:2001
|
| DIN EN 417-2003
| 便攜式燃具用帶或不帶閥門的一次性使用液化石油氣金屬氣罐.制造、檢驗、試驗和標記
| Non-refillable metallic cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking; German version EN 417:2003
|
| DIN EN 45510-7-1-2000
| 發電廠設備和系統購置指南.第7-1部分:管道系統和閥.高壓管道系統
| Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999
|
| DIN EN 45510-7-2-2000
| 發電廠設備和系統購置指南.第7-2部分:管道系統和閥.鍋爐和高壓管路閥門
| Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999
|
| DIN EN 488-2003
| 區域供暖管道.直埋式熱水供應網預隔熱連接管道系統.聚氨酯絕熱和聚乙烯外覆層鋼管鋼閥門組件
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003
|
| DIN EN 50216-8-2005
| 電力變換器和反應器配件.第8部分:絕緣液電路用蝶閥
| Power transformer and reactor fittings - Part 8: Butterfly valves for insulating liquid circuits; German version EN 50216-8:2005
|
| DIN EN 558-1-1995
| 工業閥門.帶法蘭管道中的金屬閥門面-面尺寸和面-中心尺寸.第1部分:按PN標識的閥門
| Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves; German version EN 558-1:1995
|
| DIN EN 558-2-1995
| 工業閥門.帶法蘭管道中的金屬閥門面-面尺寸和面-中心尺寸.第2部分:按級別標識的閥門
| Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves; German version EN 558-2:1995
|
| DIN EN 561-2002
| 氣焊設備.焊接、切割和相關工藝用與關閉閥的速動連接; 德文版本 EN 561:2002
| Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes; German version EN 561:2002
|
| DIN EN 593-2004
| 工業閥門.金屬蝶閥
| Industrial valves - Metallic butterfly valves; German version EN 593:2004
|
| DIN EN 60534-1-2005
| 工業過程控制閥.第1部分:控制閥術語和一般條件
| Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:2005); German version EN 60534-1:2005
|
| DIN EN 60534-2-1-2000
| 工業過程控制閥.第2-1部分:流通能力.安裝條件下流體流量的校準公式
| Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998); German version EN 60534-2-1:1998
|
| DIN EN 60534-2-3-1998
| 工業加工控制閥.第2-3部分:流量.試驗方法
| Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998
|
| DIN EN 60534-2-5-2004
| 工業過程控制閥.第2-5部分:流通能力.通過有段間恢復能力的多段控制閥門的流體流量的校準公式
| Industrial process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003); German version EN 60534-2-5:2003
|
| DIN EN 60534-3-1-2000
| 工業過程控制閥.第3-1部分:尺寸.法蘭雙通球形直型控制閥的端面間距尺寸和有法蘭雙通球形角型控制閥的中心與
| Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000); German version EN 60534-3-1:2000 + Corrigendum 2000
|
| DIN EN 60534-3-2-2002
| 工業過程控制閥.第3-2部分:尺寸.無法蘭控制閥(薄型蝶閥除外)的端面間距尺寸
| Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001); German version EN 60534-3-2:2001
|
| DIN EN 60534-3-3-2000
| 工業過程控制閥.第3-3部分:尺寸.對接焊雙通球形、直型控制閥的首尾相接尺寸
| Industrial-process control valves - Part 3-3: Dimensions - end-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998); German version EN 60534-3-3:1998
|
| DIN EN 60534-5-2004
| 工業過程控制閥.第5部分:標記
| Industrial-process control valves - Part 5: Marking (IEC 60534-5:2004); German version EN 60534-5:2004
|
| DIN EN 60534-6-1-1998
| 工業加工用控制閥.第6部分:定位器與控制閥連接的安裝細節.第1節:安裝在線性作動器上的定位器
| Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997
|
| DIN EN 60534-6-2-2001
| 工業過程控制閥.第6-2部分:控制閥定位器安裝細則.旋轉傳動裝置上安裝的定位器
| Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators (IEC 60534-6-2:2000); German version EN 60534-6-2:2001
|
| DIN EN 60534-8-1-2006
| 工業過程控制閥.第8-1部分:噪聲的考慮.氣動流流經控制閥產生的噪聲的實驗室測量
| Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:2005); German version EN 60534-8-1:2005
|
| DIN EN 60534-8-2-1994
| 工業過程控制閥.第8部分:噪聲.第2節:控制閥液流噪聲的實驗室測量
| Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993
|
| DIN EN 60534-8-3-2001
| 工業過程控制閥.第8-3部分:噪聲.控制閥氣動噪聲預測法
| Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000
|
| DIN EN 60534-8-4-2006
| 工業過程控制閥.第8-4部分:噪聲考慮.氣流噪聲預測
| Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:2005 + Corrigendum 1:2006); German version EN 60534-8-4:2005
|
| DIN EN 60700-1-2004
| 高壓直流(HVDC)輸電用晶閘管閥.第1部分:電氣試驗
| Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:1998 + A1:2003); German version EN 60700-1:1998 + A1:2003
|
| DIN EN 60730-2-19-2002
| 家用和類似用途的自動電力控制器.第2-19部分:包括機械要求的電動油閥的特殊要求 (IEC 60730-2-19:1997 + A1
| Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997 + A1:2000, modified); German version EN 60730-2-19:2002
|
| DIN EN 60730-2-19/A11-2005
| 家用及類似用途的電自動控制裝置.第2-19部分:包括機械要求的電動油閥的特殊要求
| Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements; German version EN 60730-2-19:2002/A11:2005
|
| DIN EN 60730-2-8-2004
| 家用及類似用途的電氣自動控制器.第2-8部分:電動水閥的特殊要求(包括機械要求)
| Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000, modified + A1:2002, modified); German version EN 60730-2-8:2002 + A1:2003
|
| DIN EN 60896-21-2004
| 固定式鉛酸蓄電池.第21部分:閥門調節型.試驗方法
| Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test (IEC 60896-21:2004); German version EN 60896-21:2004
|
| DIN EN 60896-22-2004
| 固定式鉛酸蓄電池.第22部分:閥門調節型.要求
| Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements (IEC 60896-22:2004); German version EN 60896-22:2004
|
| DIN EN 61056-1-2003
| 通用鉛酸蓄電池組(閥門調節型).第1部分:一般要求、功能特性.試驗方法
| General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics; Methods of test (IEC 61056-1:2002); German version EN 61056-1:2003
|
| DIN EN 61056-2-2003
| 通用鉛酸蓄電池組(閥門調節型).第2部分:尺寸、端子和標記
| General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2002); German version EN 61056-2:2003
|
| DIN EN 61514-2-2004
| 工業過程控制系統.第2部分:帶氣動輸出的智能閥定位器的性能評估方法
| Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs (IEC 61514-2:2004); German version EN 61514-2:2004
|
| DIN EN 61514-2002
| 工業過程控制系統.氣動輸出閥門定位器性能評價方法 (IEC 61514:2000); 德文版本 EN 61514:2002
| Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs (IEC 61514:2000); German version EN 61514:2002
|
| DIN EN 61954-2004
| 輸電和配電系統電力電子設備.靜態無功功率補償器用晶閘管閥的試驗
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators (IEC 61954:1999 + Corr. 1999 + A1:2003); German version EN 61954:1999 + A1:2003
|
| DIN EN 629-1-1996
| 可運輸煤氣罐.煤氣罐連結閥用25E錐螺紋.第1部分:規范
| Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 1: Specification; German version EN 629-1:1996
|
| DIN EN 629-2-1996
| 可運輸煤氣罐.煤氣罐連結閥用25E錐螺紋.第2部分:量規檢驗
| Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection; German version EN 629-2:1996
|
| DIN EN 736-2-1997
| 閥門.術語.第2部分:閥門元部件定義
| Valves - Terminology - Part 2: Definition of components of valves; German version EN 736-2:1997
|
| DIN EN 736-3-2002
| 閥門.術語.第3部分:術語定義(包括修改件A1)
| Valves - Terminology - Part 3: Definition of terms (includes Amendment A1:2001); German version EN 736-3:1999 + A1:2001
|
| DIN EN 816-1997
| 衛生器具附件.自鎖閥門PN 10
| Sanitary tapware - Automatic shut-off valves PN 10; German version EN 816:1996
|
| DIN EN 917-1997
| 塑料管道系統.熱塑閥門.耐內壓和密封性試驗方法
| Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
|
| DIN EN 962-2000
| 移動式氣瓶.工業和醫療氣體瓶的閥門保護帽和閥蓋.設計、制造和試驗(包括修改件A1-1999和A2-2000)
| Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests (included amendment A1:1999 + A2:2000); German version EN 962:1996 + A1:1999 + A2:2000
|
| DIN EN ISO 10297-2006
| 可運輸氣瓶.氣瓶閥.規范和型式試驗
| Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2006); German version EN ISO 10297:2006
|
| DIN EN ISO 10417-2005
| 石油和天然氣工業.井下安全閥系統.設計、安裝、操作和修整
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004); English version EN ISO 10417:2004
|
| DIN EN ISO 10432-2005
| 石油和天然氣工業.下降孔設備.地下安全閥設備
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004); English version EN ISO 10432:2004
|
| DIN EN ISO 10434-2005
| 石油、石油化學和相關工業用螺栓帽狀鋼閘閥
| Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004); German version EN ISO 10434:2004
|
| DIN EN ISO 10497-2004
| 閥門的測試.防火類型試驗要求
| Testing of valves - Fire type testing requirements (ISO 10497:2004); German version EN ISO 10497:2004
|
| DIN EN ISO 10524-3-2006
| 醫療氣體用壓力調節器.第3部分:帶氣缸閥的壓力調節器(ISO 10524-3:2005)
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005); German version EN ISO 10524-3:2006
|
| DIN EN ISO 10692-1-2003
| 儲氣瓶.微電子工業用儲氣瓶閥接頭.第1部分:輸出口接頭
| Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 1: Outlet connections (ISO 10692-1:2001); German version EN ISO 10692-1:2001
|
| DIN EN ISO 10692-2-2003
| 儲氣瓶.微電子工業用儲氣瓶閥接頭.第2部分:儲氣瓶閥接頭規范和型式試驗
| Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001
|
| DIN EN ISO 11114-1-1998
| 可運輸氣瓶.裝有氣體的氣瓶及其閥門材料的相容性.第1部分:金屬材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997) (includes corrigendum AC:1998); German version EN ISO 11114-1:1997
|
| DIN EN ISO 11114-2-2001
| 可運輸氣瓶.氣瓶及閥門材料與內裝氣體的兼容性.第2部分:非金屬材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000); German version EN ISO 11114-2:2000
|
| DIN EN ISO 11114-3-1998
| 可運輸氣瓶.裝有氣體的氣瓶和閥門材料的兼容性.第3部分:有氧環境中自燃試驗
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997) (including corrigendum AC:1998); German version EN ISO 11114-3:1997 + AC:1998
|
| DIN EN ISO 11114-4-2005
| 移動氣瓶.氣瓶和瓶閥材料與盛裝氣體的相容性.第4部分:選擇耐氫脆的金屬材料的試驗方法
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005); German version EN ISO 11114-4:2005
|
| DIN EN ISO 11116-1-2000
| 移動式氣瓶.氣瓶.閥門與氣瓶連接用17E錐螺紋.第1部分:規范
| Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 1: Specification (ISO 11116-1:1999); German version EN ISO 11116-1:1999
|
| DIN EN ISO 11116-2-1999
| 可運輸?shù)臍夤?氣體罐.閥門與氣罐連接的17E 錐型螺紋.第1部分:檢驗量規
| Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999); German version EN ISO 11116-2:1999
|
| DIN EN ISO 12209-1-2001
| 儲氣瓶.壓縮可呼吸空氣用氣瓶閥的放氣連接器.第1部分:軛式連接件
| Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000); German version EN ISO 12209-1:2000
|
| DIN EN ISO 12209-2-2001
| 儲氣瓶.壓縮可呼吸空氣用氣瓶閥的放氣連接器.第2部分:螺紋式連接件
| Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000); German version EN ISO 12209-2:2000
|
| DIN EN ISO 12209-3-2001
| 儲氣瓶.壓縮可呼吸空氣用氣瓶閥的放氣連接器.第2部分:230bar閥門適配器
| Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adapter for 230 bar valves (ISO 12209-3:2000); German version EN ISO 12209-3:2000
|
| DIN EN ISO 13340-2001
| 可運輸氣瓶.不可再灌裝的氣瓶閥門.規范和原型試驗
| Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001); German version EN ISO 13340:2001
|
| DIN EN ISO 13341-1998
| 可運輸儲氣瓶.閥門和氣瓶間的連接
| Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997) (including corrigendum AC); German version EN ISO 13341:1997 + AC:1998
|
| DIN EN ISO 13758-1997
| 液化石油氣.丙烷干燥度評估.閥門凍結法
| Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996); German version EN ISO 13758:1996
|
| DIN EN ISO 14246-2001
| 可運輸氣瓶.氣瓶閥.生產試驗和檢驗
| Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001
|
| DIN EN ISO 14723-2003
| 石油和天然氣工業.管道輸送系統.海底管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001
|
| DIN EN ISO 15245-1-2003
| 儲氣瓶.連接氣瓶閥的平行螺紋.第1部分:規范
| Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 15245-1:2001); German version EN ISO 15245-1:2001
|
| DIN EN ISO 15245-2-2002
| 儲氣瓶.連接儲氣瓶閥門的平行螺紋.第2部分:量規檢驗 (ISO 15245-2:2001); 德文版本 EN ISO 15245-2:2001
| Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
|
| DIN EN ISO 15364-2002
| 船舶和航海技術.油輪用壓力/真空閥 (ISO 15364:2000); 德文版本 EN ISO 15364:2001
| Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001
|
| DIN EN ISO 15761-2003
| 石油和天然氣工業用規格為DN 100及更小的鋼閘閥、球閥和止回閥
| Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)
|
| DIN EN ISO 15848-1-2006
| 工業閥.漏氣的測量、試驗和鑒定程序.第1部分:閥門定型試驗的分類系統和鑒定程序
| Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2006); German version EN ISO 15848-1:2006
|
| DIN EN ISO 15996-2005
| 氣瓶.殘余壓力閥門.一般要求和型式試驗
| Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005); German version EN ISO 15996:2005
|
| DIN EN ISO 16135-2006
| 工業閥.熱塑性材料的球閘閥
| Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006
|
| DIN EN ISO 16136-2006
| 工業閥.熱塑性材料的蝶閥
| Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006); German version EN ISO 16136:2006
|
| DIN EN ISO 16137-2006
| 工業閥.熱塑性材料的止回閥
| Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006); German version EN ISO 16137:2006
|
| DIN EN ISO 16138-2006
| 工業閥.熱塑性材料的球閥
| Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006
|
| DIN EN ISO 16139-2006
| 工業閥.熱塑性材料的門閥
| Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006); German version EN ISO 16139:2006
|
| DIN EN ISO 17292-2004
| 石油、石油化學和相關工業用金屬球閥
| Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004); German version EN ISO 17292:2004
|
| DIN EN ISO 21787-2006
| 工業閥.熱塑性材料的球形閥
| Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); German version EN ISO 21787:2006
|
| DIN EN ISO 407-2005
| 小型醫用氣瓶.針導軛式閥連接
| Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2004); German version EN ISO 407:2004
|
| DIN EN ISO 4126-1-2004
| 過壓保護安全設備.第1部分:安全閥
| Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004); German version EN ISO 4126-1:2004
|
| DIN EN ISO 4126-3-2006
| 過壓保護安全設備.第3部分:組合中防爆板安全設備和安全閥
| Safety devices for protection against exessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006); German version EN ISO 4126-3:2006
|
| DIN EN ISO 4126-4-2004
| 過壓保護安全設備.第4部分:安全操作導閥
| Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004); German version EN ISO 4126-4:2004
|
| DIN EN ISO 5135-1999
| 聲學.采用在混響室測量方法測定航空終點站裝置、航空終點站設備、消音器和閥門發出的噪音的聲功率水平
| Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997); German version EN ISO 5135:1998
|
| DIN EN ISO 5210-1996
| 工業閥門.多圈旋轉閥門驅動器附件
| Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991); German version EN ISO 5210:1996
|
| DIN EN ISO 5211-2001
| 工業閥門.單圈旋轉型閥門驅動器附件
| Industrial valves - Part-turn actuator attachments (ISO 5211:2001); German version EN ISO 5211:2001
|
| DIN EN ISO 9093-1-1998
| 小型船舶.船底閥和船體外殼管接頭.第1部分:金屬件
| Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994); German version EN ISO 9093-1:1997
|
| DIN IEC 60534-2-4-1990
| 工業過程控制閥.第2部分:流動能力.第4節:內在流動特性線和調節比例關系
| Industrial-process control valves; flow capacity; inherent flow characteristics and rangeability; identical with IEC 60534-2-4:1989
|
| DIN IEC 60534-7-1992
| 工業過程控制閥.第7部分:.數據表
| Industrial process control valves; control valve data sheet; identical with IEC 60534-7:1989
|
| DIN IEC 61148-1994
| 閥器件堆和組合裝置及電力變流設備的端子標記
| Terminal markings for valve device stacks and assemblies and for power convertor equipment; identical with IEC 61148:1992
|
| DIN ISO 11727-2003
| 氣壓傳動.控制閥和其他元件的氣口和控制機構的標識
| Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components (ISO 11727:1999)
|
| DIN ISO 1204-1994
| 往復式內燃機.旋轉方向和氣缸標識、氣缸頭閥門、直列式發動機右側和左測定義及在發動機上的位置
| Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
|
| DIN ISO 12238-2005
| 液壓傳動.方向控制閥門.移動時間測量(ISO 12238-2001)
| Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001)
|
| DIN ISO 15407-1-2003
| 氣壓傳動.五氣口方向控制閥、規格18mm和26mm.第1部分:無電氣接頭的安裝面
| Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO 15407-1:2000)
|
| DIN ISO 4010-1978
| 道路車輛.延遲針閥式標定噴嘴
| Calibrating Nozzle, Delay Pintle Type
|
| DIN ISO 5599-1-2005
| 氣壓傳動.五氣口方向控制閥.第1部分:不帶電接頭的安裝面
| Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector (ISO 5599-1:2001)
|
| DIN ISO 6553-1981
| 自動蒸氣閥.標記
| Automatic steam traps; marking
|
| DIN ISO 7368-1994
| 液壓流體動力.兩通口筒形插入閥.閥腔
| Hydraulic fluid power; two-port slip-in cartridge valves; cavities; identical with ISO 7368:1989
|
| DIN ISO 7967-3-1993
| 往復式內燃機.零部件和系統詞匯.閥門、凸輪軸和傳動機構
| Reciprocating internal combustion engines; vocabulary of components and systems; valves, camshaft drive and actuating mechanisms; identical with ISO 7967-3:1987
|
| DIN V 19259-2-1999
| 裝置的文件.閥門的相關分類的標準數據元類型
| Documentation of devices - Standard data element types with associated classification for valves
|
| DIN V 3838-2003
| 加熱裝置用閥.有外螺紋管G 3/4 A和內部錐體的可拆卸連接
| Valves for heating installations - Detachable connection with outside threaded pipe G 3/4 A and inside cone
|
| 編號 | 中文名稱 | 英文名稱 |
|---|