| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60099-1 AMD 1-1999
| 避雷器 第1部分:交流系統用有間隙閥式避雷器 修改件1
| Surge arresters - Part 1: Non-linear resistor type gapped arresters for a.c. systems; Amendment 1
|
| IEC 60099-1-1991
| 避雷器 第1部分:交流系統用有間隙閥式避雷器
| Surge arresters; part 1: non-linear resistor type gapped surge arresters for a.c. systems
|
| IEC 60534-1-2005
| 工業過程控制閥.第1部分:控制閥術語和一般考慮
| Industrial-process control valves - Part 1: Control valve terminology and general considerations
|
| IEC 60534-2-1 Corrigendum 1-2000
| 工業過程控制閥.第2-1部分:流通能力.安裝條件下流體流量的校準公式
| Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
|
| IEC 60534-2-1-1998
| 工業過程控制閥 第2-1部分:流通能力 安裝條件下流體流量的校準公式
| Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
|
| IEC 60534-2-3-1997
| 工業過程控制閥 第2-3部分:流通能力 試驗規程
| Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
|
| IEC 60534-2-4-1989
| 工業過程控制閥 第2部分:流通能力 第4節:固有流動特性和變化范圍
| Industrial-process control valves; part 2: flow capacity; section four: inherent flow characteristics and rangeability
|
| IEC 60534-2-5-2003
| 工業過程控制閥.第2-5部分:流通能力.通過有段間恢復能力的多段控制閥門的流體流量的校準公式
| Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery
|
| IEC 60534-3-1-2001
| 工業過程控制閥.第3-1部分:尺寸.法蘭面對面尺寸,兩路,直型和法蘭中心對面尺寸,兩路,球形,角型控制閥門
| Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
|
| IEC 60534-3-2-2001
| 工業過程控制閥 第3-2部分：尺寸 旋轉控制閥（除蝶閥外）的端面間距尺寸
| Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves
|
| IEC 60534-3-3-1998
| 工業過程控制閥 第3-3部分:尺寸 對接焊的雙通球形、直型控制閥的首尾相接尺寸
| Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
|
| IEC 60534-4-2006
| 工業過程控制閥.第4部分:檢驗和常規試驗
| Industrial process control valves - Part 4: Inspection and routine testing
|
| IEC 60534-5-2004
| 工業過程控制閥.第5部分:標記
| Industrial-process control valves - Part 5: Marking
|
| IEC 60534-6-1-1997
| 工業過程控制閥 第6部分:定位器聯接到控制閥執行機構的安裝細則 第1節:線型執行機構上定位器的安裝
| Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators
|
| IEC 60534-6-2-2000
| 工業過程控制閥 第6部分:定位器聯接到控制閥執行機構的安裝細則 環形執行機構定位器
| Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators
|
| IEC 60534-7-1989
| 工業過程控制閥 第7部分:控制閥數據表
| Industrial-process control valves; part 7: control valve data sheet
|
| IEC 60534-8-1-2005
| 工業過程控制閥.第8-1部分:噪聲的考慮.氣動流流經控制閥產生的噪聲的實驗室測量
| Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
|
| IEC 60534-8-2-1991
| 工業過程控制閥 第8部分:噪聲的考慮 第2節:流動液流經控制閥產生的噪聲的實驗室測量
| Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves
|
| IEC 60534-8-3-2000
| 工業過程控制閥 第8-3部分:噪聲的考慮 控制閥的氣動噪聲預測法
| Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method
|
| IEC 60534-8-4 Corridendum 1-2006
| 工業過程控制閥.第8-4部分:噪聲問題.預測液體動力流產生的噪聲.勘誤1
| Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow; Corrigendum 1
|
| IEC 60534-8-4-2005
| 工業過程控制閥.第8-4部分:噪聲問題.預測液體動力流產生的噪聲
| Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
|
| IEC 60700-1 AMD 1-2003
| 高壓直流(HVDC)電力傳輸用可控硅閥門.第1部分:電氣試驗.修改件1
| Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing; Amendment 1
|
| IEC 60700-1 Edition 1.1-2003
| 高壓直流(HVDC)電力傳輸用可控硅閥.第1部分:電氣試驗
| Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
|
| IEC 60700-1-1998
| 高壓直流(HVDC)輸電用晶閘管閥 第1部分:電氣試驗
| Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
|
| IEC 60730-2-17 AMD 1-2000
| 家用和類似用途的自動電氣控制.第2-17部分:電氣操作氣體閥門的特殊要求,包括機械要求.修改件1
| Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements; Amendment 1
|
| IEC 60730-2-17 Edition 1.1-2001
| 家用和類似用途的自動電氣控制.第2-17部分:電控氣閥的特殊要求,包括機械要求
| Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
|
| IEC 60730-2-17-1997
| 家用及類似用途的電氣自動控制器 第2-17部分:電動氣閥的特殊要求(包括機械要求)
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated gas valves, including mechanical requirements
|
| IEC 60730-2-19 AMD 1-2000
| 家用和類似用途的自動電氣控制.第2-19部分:電氣操作油閥門的特殊要求,包括機械要求.修改件1
| Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements; Amendment 1
|
| IEC 60730-2-19 Edition 1.1-2001
| 家用和類似用途的自動電氣控制.第2-19部分:電控油閥的特殊要求,包括機械要求
| Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
|
| IEC 60730-2-19-1997
| 家用及類似用途的電氣自動控制器 第2-19部分:電動油閥的特殊要求(包括機械要求)
| Automatic electric controls for household and similar use - Part 2: Particular requirements for electrically operated oil valves, including mechanical requirements
|
| IEC 60730-2-8 AMD 1-2002
| 家用和類似用途的電氣自動控制器.第2-8部分:電動水閥的特殊要求(包括機械要求).修改件1
| Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements; Amendment 1
|
| IEC 60730-2-8 Edition 2.1-2003
| 家用和類似用途的電器自動控制器.第2-8部分:電動水閥的特殊要求(包括機械要求)
| Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
|
| IEC 60730-2-8-2000
| 家用和類似用途的電氣自動控制器 第2-8部分:電動水閥的特殊要求(包括機械要求)
| Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
|
| IEC 60896-21-2004
| 固定式鉛酸蓄電池組.第21部分:閥調整型.試驗方法
| Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
|
| IEC 60896-22-2004
| 固定式鉛酸蓄電池組.第22部分:閥調整型.要求
| Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
|
| IEC 61056-1-2002
| 通用鉛酸蓄電池組(閥門調節型).第1部分:一般要求、功能特性.試驗方法
| General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics; Methods of test
|
| IEC 61056-2-2002
| 通用鉛酸蓄電池組(閥門調節型).第2部分:尺寸、端子和標記
| General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
|
| IEC 61148 Corrigendum 1-1995
| 閥器件堆和組合裝置以及電力變流設備的端子標記
| Terminal markings for valve device stacks and assemblies and for power convertor equipment
|
| IEC 61148-1992
| 閥器件堆和組合裝置以及電力變流設備的端子標記
| Terminal markings for valve device stacks and assemblies and for power convertor equipment
|
| IEC 61514-2-2004
| 工業過程控制系統.第2部分:氣動輸出智能閥門定位器性能評定方法
| Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
|
| IEC 61514-2000
| 工業過程控制系統 氣動輸出閥門定位器性能評定方法
| Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
|
| IEC 61954 AMD 1-2003
| 送電和配電系統用電力電子設備.靜態變量補償器用可控硅閥門的試驗.修改件1
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators; Amendment 1
|
| IEC 61954 Corrigendum 1-1999
| 輸電和配電系統用電力電子設備.靜態無功功率補償器用晶閘管閥的試驗
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
|
| IEC 61954-1999
| 輸電和配電系統用電力電子設備 靜態無功功率補償器用晶閘管閥的試驗
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
|
| IEC/TR3 61056-3-1991
| 便攜式鉛酸電池和蓄電池組(閥門調節型) 第3部分:電器使用的安全建議
| Portable lead-acid cells and batteries (valve-regulated types); part 3: safety recommendations for use in electric appliances
|
| ISO 10156-1996
| 氣體和氣體混合物 為選擇氣瓶閥出氣口測定氣體的潛在燃燒性和氧化能力
| Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
|
| ISO 1023-1974
| 航空器 高壓空氣充氣閥
| Aircraft; High pressure air charging valves
|
| ISO 10294-1-1996
| 耐火試驗 用于空氣調節系統的防火閥 第1部分:試驗方法
| Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
|
| ISO 10294-2-1999
| 耐火試驗 用于空氣調節系統的防火閥 第2部分:試驗結果的分類、校正和應用
| Fire resistance tests - Fire dampers for air distribution systems - Part 2: Classification, criteria and field of application of test results
|
| ISO 10294-3-1999
| 耐火試驗 用于空氣調節系統的防火閥 第3部分:試驗方法指南
| Fire resistance tests - Fire dampers for air distribution systems - Part 3: Guidance on the test method
|
| ISO 10294-4-2001
| 耐火試驗 用于空氣調節系統的防火閥 第4部分：熱釋放機理試驗
| Fire resistance tests - Fire dampers for air distribution systems - Part 4: Test of thermal release mechanism
|
| ISO 10294-5-2005
| 耐火試驗.用于空氣調節系統的防火閥.第5部分:膨脹防火閥
| Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers
|
| ISO 10297-2006
| 可運輸氣瓶.氣瓶閥.規范和型式試驗
| Transportable gas cylinders - Cylinder valves - Specification and type testing
|
| ISO 10372-1992
| 液壓傳動 四油口和五油口伺服閥 安裝面
| Hydraulic fluid power; four- and five-port servovalves; mounting surfaces
|
| ISO 10417-2004
| 石油和天然氣工業.井下安全閥系統.設計、安裝、操作和修整
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
|
| ISO 10432-2004
| 石油和天然氣工業.下降孔設備.地下安全閥設備
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
|
| ISO 10434-2004
| 石油、石油化學和相關工業用栓接帽狀鋼閘閥
| Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
|
| ISO 10497-2004
| 閥門試驗.閥門耐火試驗要求
| Testing of valves - Fire type-testing requirements
|
| ISO 10522-1993
| 農業灌溉設備 直接作用的調壓閥
| Agricultural irrigation equipment; direct-acting pressure-regulating valves
|
| ISO 10524-3-2005
| 醫用氣體設備用的壓力調節器.第3部分:帶氣瓶閥的壓力調節器
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
|
| ISO 10631-1994
| 通用金屬蝶閥
| Metallic butterfly valves for general purposes
|
| ISO 10692-1-2001
| 氣瓶 微電子工業用氣瓶閥的連接 第1部分：出口連接
| Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 1: Outlet connections
|
| ISO 10692-2-2001
| 氣瓶 微電子工業用氣瓶閥的連接 第2部分：閥與瓶連接的規范和型式試驗
| Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 2: Specification and type testing for valve to cylinder connections
|
| ISO 10770-1-1998
| 液壓傳動 電調制液壓控制閥 第1部分:四通流量控制閥的試驗方法
| Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves
|
| ISO 10770-2-1998
| 液壓傳動 電調制液壓控制閥 第2部分:三通流量控制閥的試驗方法
| Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves
|
| ISO 10920-1997
| 氣瓶 氣瓶與瓶閥連接用25E錐螺紋 規范
| Gas cylinders - 25E taper thread for connection of valves to gas cylinders - Specification
|
| ISO 10933-1997
| 燃?xì)夥峙湎到y(tǒng)用聚乙烯(PE)閥門
| Polyethylene (PE) valves for gas distribution systems
|
| ISO 11114-1-1997
| 移動氣瓶 氣瓶和瓶閥材料與盛裝氣體的相容性 第1部分:金屬材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
|
| ISO 11114-2-2000
| 移動氣瓶 氣瓶和瓶閥材料與盛裝氣體的相容性 第2部分:非金屬材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
|
| ISO 11114-3-1997
| 移動氣瓶 氣瓶和瓶閥材料與盛裝氣體的相容性 第3部分:氧環境中自燃試驗
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere
|
| ISO 11114-4-2005
| 移動氣瓶.氣瓶和瓶閥材料與盛裝氣體的相容性.第4部分:選擇抗氫脆金屬材料的試驗方法
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
|
| ISO 11116-1-1999
| 氣瓶 氣瓶與瓶閥連接用17E錐螺紋 第1部分:規范
| Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 1: Specification
|
| ISO 11116-2-1999
| 氣瓶 氣瓶與瓶閥連接用17E錐螺紋 第2部分:檢驗量規
| Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges
|
| ISO 11191-1997
| 氣瓶 氣瓶與瓶閥連接用25E錐螺紋 檢驗量規
| Gas cylinders - 25E taper thread for connection of valves to gas cylinders - Inspection gauges
|
| ISO 11419-1997
| 農業灌溉設備 浮子式空氣釋放閥
| Agricultural irrigation equipment - Float type air release valves
|
| ISO 11727-1999
| 氣壓傳動 控制閥和其他元件的氣口控制機構的標識
| Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components
|
| ISO 11929-1-2000
| 電離輻射測量探測限和判斷閥的確定 第1部分:基本原則及對不經過樣品處理的計數測量的應用
| Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 1: Fundamentals and application to counting measurements without the influence of sample treatment
|
| ISO 11929-2-2000
| 電離輻射測量探測限和判斷閥的確定 第2部分:基本原則及對經過樣品處理的計數測量的應用
| Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 2: Fundamentals and application to counting measurements with the influence of sample treatment
|
| ISO 11929-3-2000
| 電離輻射測量探測限和判斷閥的確定 第3部分:基本原則及對不經過樣品處理的高分辨率γ能譜法計數測量的應用
| Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
|
| ISO 11929-7-2005
| 電離輻射測量探測限和判斷閥的確定.第7部分:基本原則和一般應用
| Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 7: Fundamentals and general applications
|
| ISO 11933-4-2001
| 密封箱室部件 第4部分：通風和氣體清潔系統，諸如：過濾器、捕獲器、安全和調節閥、控制和保護器件
| Components for containment enclosures - Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices
|
| ISO 12149-1999
| 螺栓連接閥蓋的通用鋼制截止閥
| Bolted bonnet steel globe valves for general-purpose applications
|
| ISO 12209-1-2000
| 氣瓶 壓縮可呼吸空氣用氣瓶閥的放氣連接器 第1部分:軛型連接器
| Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections
|
| ISO 12209-2-2000
| 氣瓶 壓縮可呼吸空氣用氣瓶閥的放氣連接器 第2部分:螺紋式連接器
| Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections
|
| ISO 12209-3-2000
| 氣瓶 壓縮可呼吸空氣用氣瓶閥的放氣連接器 第3部分:230巴閥適配器
| Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves
|
| ISO 12238-2001
| 氣壓傳動 方向控制閥 移動時間的測量
| Pneumatic fluid power - Directional control valves - Measurement of shifting time
|
| ISO 13340-2001
| 可搬運輸汽缸 不可再充氣汽缸閥 規范和原機試驗
| Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing
|
| ISO 13341 Technical Corrigendum 1-1998
| 移動氣瓶 氣瓶閥的裝配 技術勘誤1
| Transportable gas cylinders - Fitting of valves to gas cylinders; Technical Corrigendum 1
|
| ISO 13341-1997
| 移動氣瓶 氣瓶閥的裝配
| Transportable gas cylinders - Fitting of valves to gas cylinders
|
| ISO 13758-1996
| 液化石油氣 評價丙烷干燥度 閥凍結法
| Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
|
| ISO 14245-2006
| 氣瓶.液化石油氣瓶閥門的規范和試驗.自閉合
| Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing
|
| ISO 14246-2001
| 可搬運的儲氣罐 儲氣罐閥 制造試驗和檢驗
| Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections
|
| ISO 14313-1999
| 石油和天然氣工業 管道輸送系統 管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
|
| ISO 14617-8-2002
| 圖表用圖形符號.第8部分:閥門和氣流調節器
| Graphical symbols for diagrams - Part 8: Valves and dampers
|
| ISO 14723-2001
| 石油和天然氣工業 管道輸送系統 海底管道閥
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
|
| ISO 14960-2004
| 無內胎輪胎.氣閥和部件.試驗方法
| Tubeless tyres - Valves and components - Test methods
|
| ISO 15218-2003
| 氣壓傳動.3/2電磁閥.安裝接口表面
| Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces
|
| ISO 15245-1-2001
| 氣瓶 閥與氣瓶連接的平行螺紋 第1部分：規范
| Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
|
| ISO 15245-2-2001
| 氣瓶 閥與氣瓶連接的平行螺紋 第2部分：量規檢驗
| Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection
|
| ISO 15364-2000
| 船舶與海上技術 散貨船真空/壓力閥
| Ships and marine technology - Pressure/vacuum valves for cargo tanks
|
| ISO 15407-1-2000
| 氣壓傳動 五氣口方向控制閥、規格18mm和26mm 第1部分:不帶電接頭的安裝面
| Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector
|
| ISO 15407-2-2003
| 氣壓傳動.五氣口方向控制閥,規格18mm和26mm.第2部分:可任選連接器的安裝接口
| Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2: Mounting interface surfaces with optional electrical connector
|
| ISO 15500-12-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第12部分:減壓閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV)
|
| ISO 15500-14-2002
| 道路車輛.壓縮天然氣(CNG)燃料系統部件.第14部分:溢流閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 14: Excess flow valve
|
| ISO 15500-3-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第3部分:防逆閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve
|
| ISO 15500-4-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第4部分:控閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve
|
| ISO 15500-5-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第5部分:手控氣缸閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve
|
| ISO 15500-6-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第6部分:自動閥
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 6: Automatic valve
|
| ISO 15665 Technical Corrigendum 1-2004
| 聲學.管道、閥門和法蘭的隔音.技術勘誤1
| Acoustics - Acoustic insulation for pipes, valves and flanges; Technical Corrigendum 1
|
| ISO 15665-2003
| 聲學.管、閥和法蘭隔聲
| Acoustics - Acoustic insulation for pipes, valves and flanges
|
| ISO 15761-2002
| 石油和天然氣工業用尺寸為DN 100及更小的鋼閘閥、球閥和止回閥
| Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
|
| ISO 15848-1-2006
| 工業閥.漏氣的測量、試驗和鑒定程序.第1部分:閥門定型試驗的分類系統和鑒定程序
| Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves
|
| ISO 15995-2006
| 氣瓶.液化石油氣瓶閥門的規范和試驗.手工操作
| Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated
|
| ISO 15996-2005
| 儲氣瓶.剩余壓力閥.一般要求和型式試驗
| Gas cylinders - Residual pressure valves - General requirements and type testing
|
| ISO 16135-2006
| 工業閥.熱塑性材料的球閥
| Industrial valves - Ball valves of thermoplastics materials
|
| ISO 16136-2006
| 工業閥.熱塑性材料的蝶閥
| Industrial valves - Butterfly valves of thermoplastics materials
|
| ISO 16137-2006
| 工業閥.熱塑性材料的止回閥
| Industrial valves - Check valves of thermoplastics materials
|
| ISO 16138-2006
| 工業閥.熱塑性材料的隔膜閥
| Industrial valves - Diaphragm valves of thermoplastics materials
|
| ISO 16139-2006
| 工業閥.熱塑性材料的門閥
| Industrial valves - Gate valves of thermoplastics materials
|
| ISO 17082-2004
| 氣壓傳動.閥.供貨商文獻中的數據
| Pneumatic fluid power - Valves - Data to be included in supplier literature
|
| ISO 17292-2004
| 石油、石化和相關工業用金屬球閥
| Metal ball valves for petroleum, petrochemical and allied industries
|
| ISO 20401 Technical Corrigendum 1-2005
| 氣動液壓驅動系統.方向控制閥.直徑在8mm到12mm的圓形電連接器管腳分布的規范.技術勘誤1
| Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm; Technical Corrigendum 1
|
| ISO 20401-2005
| 氣動液壓驅動系統.方向控制閥.直徑在8mm到12mm的圓形電連接器管腳分布的規范
| Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
|
| ISO 21787-2006
| 工業閥.熱塑性材料的球形閥
| Industrial valves - Globe valves of thermoplastics materials
|
| ISO 2290-1972
| 旋轉鉆井設備.方鉆桿上旋閥和下旋閥
| Rotary drilling equipment; Upper and lower Kelly cocks
|
| ISO 23551-1-2006
| 氣體燃燒器和燃?xì)庠O(shè)備用安全和控制裝置.特殊要求.第1部分:自動閥門
| Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 1: Automatic valves |
| ISO 23551-4-2005
| 氣體燃燒器和燃?xì)庠O(shè)備用安全和控制設備.特殊要求.第4部分:自動截止閥的閥門檢驗系統
| Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 4: Valve-proving systems for automatic shut-off valves
|
| ISO 3822-2-1995
| 聲學 供水設施的裝置和設備發射的噪聲的實驗室測試 第2部分:放水龍頭和混合閥的安裝和工作條件
| Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves
|
| ISO 3822-3-1997
| 聲學 供水設施的裝置和設備發射的噪聲的實驗室測試 第3部分:管路閥門和器件的安裝和工作條作
| Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
|
| ISO 407-2004
| 小型醫用氣瓶.針導軛式閥連接
| Small medical gas cylinders - Pin-index yoke-type valve connections
|
| ISO 4126-1-2004
| 過壓保護安全設備.第1部分:安全閥
| Safety devices for protection against excessive pressure - Part 1: Safety valves
|
| ISO 4126-3-2006
| 過壓保護安全設備.第3部分:組合中防爆板安全設備和安全閥門
| Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination
|
| ISO 4126-4-2004
| 過壓保護安全設備.第4部分:液壓控制安全閥
| Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves
|
| ISO 4401-2005
| 液壓傳動.四油口定向控制閥.裝配面
| Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
|
| ISO 4411-1986
| 液壓傳動 閥 壓差/流量特性的測定
| Hydraulic fluid power; Valves; Determination of pressure differential/flow characteristics
|
| ISO 4422-4-1997
| 給水用硬聚氯乙烯(PVC-U)管材和管件 規范 第4部分:閥及輔助設備
| Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 4: Valves and ancillary equipment
|
| ISO 4548-2-1997
| 內燃機全流式機油濾清器試驗方法 第2部分:濾芯旁通閥特性
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 2: Element by-pass valve characteristics
|
| ISO 4548-9-1995
| 內燃機全流式機油濾清器試驗方法 第9部分:進、出口止回閥試驗
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
|
| ISO 5135-1997
| 聲學 在混響室中測定空調終端設備、空調終端單元、阻尼器和調節閥門的噪聲功率級
| Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
|
| ISO 5145 AMD 1-2006
| 氣體和混合氣體氣瓶閥出氣口.選擇和尺寸.修改件1：醫用氣體氣瓶瓶閥出氣口
| Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning; Amendment 1: Cylinder valve outles for gases for medical use
|
| ISO 5145-2004
| 氣體和混合氣體氣瓶瓶閥出氣口.選擇和尺寸
| Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
|
| ISO 5208-1993
| 通用閥門 閥門的壓力試驗
| Industrial valves; pressure testing of valves
|
| ISO 5209-1977
| 通用閥門 標志
| General purpose industrial valves; Marking
|
| ISO 5210-1991
| 通用閥門 多回轉閥門驅動裝置的連接
| Industrial valves; multi-turn valve actuator attachments
|
| ISO 5211-2001
| 工業閥門.部分回轉閥門致動器附件
| Industrial valves - Part-turn actuator attachment
|
| ISO 5599-1-2001
| 氣壓傳動 五氣口方向控制閥 第1部分:不帶電接頭的安裝面
| Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector
|
| ISO 5599-2 AMD 1-2004
| 氣壓傳動.五氣口方向控制閥.第2部分:帶可選電接頭的安裝面.修改件1
| Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector; Amendment 1
|
| ISO 5599-2-2001
| 氣壓傳動 五氣口方向控制閥 第2部分:帶可選電接頭的安裝面
| Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector
|
| ISO 5599-3-1990
| 氣壓傳動 五氣口方向控制閥 第3部分:表示閥功能的標注方法
| Pneumatic fluid power; five-port directional control valves; part 3: code system for communication of valve functions
|
| ISO 5781-2000
| 液壓傳動 壓力控制閥(不包括溢流閥)、順序閥、卸荷閥、節流閥和單向閥 安裝面
| Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces
|
| ISO 5783-1995
| 液壓傳動 閥安裝面和插裝閥孔的標識規則
| Hydraulic fluid power - Code for identification of valve mounting surfaces and cartridge valve cavities
|
| ISO 5996-1984
| 鑄鐵閘閥
| Cast iron gate valves
|
| ISO 6002-1992
| 用螺栓連接閥蓋的鋼制閘閥
| Bolted bonnet steel gate valves
|
| ISO 6182-2-2005
| 消防.自動噴水滅火系統.第2部分:濕式報警閥、延遲器和水務警鈴的要求和試驗方法
| Fire protection - Automatic sprinkler systems - Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms
|
| ISO 6182-3-2005
| 消防.自動噴水滅火系統.第3部分:干式閥的要求和試驗方法
| Fire protection - Automatic sprinkler systems - Part 3: Requirements and test methods for dry pipe valves
|
| ISO 6182-5-2006
| 消防.自動噴水滅火系統.第5部分:雨淋閥的要求和試驗方法
| Fire protection - Automatic sprinkler systems - Part 5: Requirements and test methods for deluge valves
|
| ISO 6182-6-2006
| 消防.自動噴水滅火系統.第6部分:止回閥的要求和試驗方法
| Fire protection - Automatic sprinkler systems - Part 6: Requirements and test methods for check valves
|
| ISO 6182-8-2006
| 消防.自動噴水滅火系統.第8部分:預動干式報警閥的要求和試驗方法
| Fire protection - Automatic sprinkler systems - Part 8: Requirements and test methods for pre-action dry alarm valves
|
| ISO 6263-1997
| 液壓傳動 調速閥 安裝面
| Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
|
| ISO 6264-1998
| 液壓傳動 溢流閥 安裝面
| Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
|
| ISO 6403-1988
| 液壓傳動 控制流量及壓力的閥 試驗方法
| Hydraulic fluid power; valves controlling flow and pressure; test methods
|
| ISO 6552-1980
| 自動蒸氣疏水閥 術語定義
| Automatic steam traps; Definition of technical terms
|
| ISO 6553-1980
| 自動蒸氣疏水閥 標志
| Automatic steam traps; Marking
|
| ISO 6554-1980
| 法蘭連接自動蒸氣疏水閥 結構長度
| Flanged automatic steam traps; Face-to-face dimensions
|
| ISO 6704-1982
| 自動蒸氣疏水閥 分類
| Automatic steam traps; Classification
|
| ISO 683-15-1992
| 熱處理鋼、合金鋼和易切鋼 第15部分:內燃機用閥門鋼
| Heat-treatable steels, alloy steels and free-cutting steels; part 15: valve steels for internal combustion engines
|
| ISO 6948-1981
| 自動蒸氣疏水閥 產品試驗和工作特性試驗
| Automatic steam traps; Production and performance characteristic tests
|
| ISO 6953-1 Technical Corrigendum 1-2006
| 氣壓傳動.壓縮空氣調壓閥和帶過濾器的調壓閥.第1部分:商務文件中包含的主要特性和產品標識要求.技術勘誤1
| Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements; Technical Corrigendum 1
|
| ISO 6953-1-2000
| 氣壓傳動 壓縮空氣調壓閥和帶過濾器的調壓閥 第1部分:商務文件中包含的主要特性和產品標識要求
| Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marketing requirements
|
| ISO 6953-2-2000
| 氣壓傳動 壓縮空氣調壓閥和帶過濾器的調壓閥 第2部分:評定商務文件中包含的主要特性的試驗方法
| Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
|
| ISO 7121-2006
| 工業通用鋼制球閥
| Steel ball valves for general-purpose industrial applications
|
| ISO 7244-1984
| 空氣配給和空氣擴散 風門和閥門的空氣動力試驗
| Air distribution and air diffusion; Aerodynamic testing of dampers and valves
|
| ISO 7259-1988
| 地下用的按鈕操縱的鑄鐵閘閥
| Predominantly key-operated cast iron gate valves for underground use
|
| ISO 7289-1996
| 氣焊、切割及相關工藝用帶關閉閥的快速接頭
| Quick-action couplings with shut-off valves for gas welding, cutting and allied processes
|
| ISO 7349-1983
| 熱塑性塑料閥門 連接參數
| Thermoplastics valves; Connection references
|
| ISO 7368-1989
| 液壓傳動 二油口蓋板式插裝閥 插裝孔
| Hydraulic fluid power; two-port slip-in cartridge valves; cavities
|
| ISO 7508-1985
| 承壓管用硬聚氯乙烯(PVC-U)閥門 基本尺寸 公制系列
| Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure; Basic dimensions; Metric series
|
| ISO 7714-2000
| 農業灌溉設備 容量閥 一般要求和試驗方法
| Agricultural irrigation equipment - Volumetric valves - General requirements and test methods
|
| ISO 7789 Technical Corrigendum 1-1999
| 液壓傳動 二油口、三油口和四油口螺紋式插裝閥 插裝孔 技術勘誤1
| Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities; Technical Corrigendum 1
|
| ISO 7789-1998
| 液壓傳動 二油口、三油口和四油口螺紋式插裝閥 插裝孔
| Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
|
| ISO 7790-1997
| 液壓傳動 四油口疊加閥和四油口方向控制閥02、03和05規格 夾緊尺寸
| Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions
|
| ISO 7841-1988
| 自動蒸氣疏水閥 漏氣量的測定 試驗方法
| Automatic steam traps; determination of steam loss; test methods
|
| ISO 7842-1988
| 自動蒸氣疏水閥 排水量測定 試驗方法
| Automatic steam traps; determination of discharge capacity; test methods
|
| ISO 8233-1988
| 熱塑性塑料閥門 扭矩 試驗方法
| Thermoplastics valves; torque; test method
|
| ISO 8242-1989
| 受壓管用聚丙烯(PP)閥門 基本尺寸 公制系列
| Polypropylene (PP) valves for pipes under pressure; basic dimensions; metric series
|
| ISO 8659-1989
| 熱塑性塑料閥門 疲勞強度 試驗方法
| Thermoplastics valves; fatigue strength; test method
|
| ISO 9393-1-2004
| 工業用熱塑性閥門.壓力試驗方法和要求.第1部分:總則
| Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 1: General
|
| ISO 9393-2-2005
| 工業用熱塑性閥門.壓力試驗方法和要求.第2部分:試驗條件和基本要求
| Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 2: Test conditions and basic requirements
|
| ISO 9461-1992
| 液壓傳動 閥的油口、底板、控制裝置和電磁鐵的標準
| Hydraulic fluid power; identification of valve ports, subplates, control devices and solenoids
|
| ISO 9635-1990
| 灌溉設備 液壓操縱灌溉閥
| Irrigation equipment; hydraulically operated irrigation valves
|
| ISO 9644 AMD 1-1998
| 農業灌溉設備 灌溉閥壓力損失 試驗方法 修改1
| Agricultural irrigation equipment - Pressure losses in irrigation valves - Test method; Amendment 1
|
| ISO 9644-1993
| 農業灌溉設備 灌溉閥壓力損失 試驗方法
| Agricultural irrigation equipment; pressure losses in irrigation valves; test method
|
| ISO 9817-1991
| 乘用車 發動機冷卻系統 注水口上的帶限壓閥加水口蓋及其斜面座的尺寸
| Passenger cars; engine cooling systems; dimensions of pressure caps and their ramp seats on filler necks
|
| ISO 9818-1991
| 乘用車 發動機冷卻系統 帶限壓閥加水口蓋的試驗方法和標志
| Passenger cars; engine cooling systems; test methods and marking of pressure caps
|
| ISO 9911-1993
| 農業灌溉設備 手工操作小型塑料閥門
| Agricultural irrigation equipment; manually operated small plastics valves
|
| ISO 9952-1993
| 農業灌溉設備 止回閥
| Agricultural irrigation equipment; check valves
|
| ISO/TR 7470-1988
| 氣瓶閥出氣口 標準或?qū)嶋H使用的一覽表
| Valve outlets for gas cylinders; list of provisions which are either standardized or in use
|
| 編號 | 中文名稱 | 英文名稱 |
|---|