| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI ATIS0600307-2007 | 遠程通信.耐火標準.設備組件的可燃性要求和電線及電纜用火焰?zhèn)鞑ヒ? | Telecommunications - Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies and Fire Spread Requirements for Wire and Cable |
| ANSI/ASTM D1047-2007 | 電線和電纜用聚氯乙烯套的規范 | Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable |
| ANSI/ASTM D1351-2002 | 電線和電纜用熱塑性聚乙烯絕緣規范 | Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable |
| ANSI/ASTM D1523-2000 | 工作在90℃的電線和電纜用合成橡膠絕緣材料的規范 | Specification for Synthetic Rubber Insulation for Wire and Cable, 90 C Operation |
| ANSI/ASTM D2219-2002 | 工作溫度為60℃的聚氯乙烯電線和電纜絕緣規范(10.01) | Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 C Operation |
| ANSI/ASTM D2220-2002 | 工作溫度為75℃的聚氯乙烯電線和電纜絕緣規范(10.01) | Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation |
| ANSI/ASTM D2308-2007 | 電線和電纜用熱塑性聚乙烯包裝物規范 | Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ANSI/ASTM D2633-2002 | 電線和電纜用熱塑性絕緣體和護套測試方法 | Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable |
| ANSI/ASTM D2655-2000 | 額定電壓達到2000伏的電線和電纜交聯聚乙烯絕緣材料規范(10.02) | Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V |
| ANSI/ASTM D2656-2006 | 額定電壓2001～35 000V的電線和電纜交聯聚乙烯絕緣材料用規范 | Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V |
| ANSI/ASTM D2770-2001 | 電線及電纜用耐臭氧乙丙橡膠整體絕緣材料及套管規范 | Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable |
| ANSI/ASTM D2802-2003 | 電線和電纜用耐臭氧乙丙橡膠絕緣材料規范 | Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable |
| ANSI/ASTM D4244-1995 | 重負載和超重負載丙烯腈丁二烯聚氯乙烯(NBR PVC)電線和電纜護套通用規范 | Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D4245-2002 | 工作溫度為90℃干/75℃濕的電線和電纜的耐臭氧熱塑性合成橡膠絕緣規范 | Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation |
| ANSI/ASTM D4246-2002 | 工作溫度為90℃的電線和電纜的耐臭氧熱塑性合成橡膠絕緣規范 | Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation |
| ANSI/ASTM D4313-2003 | 電線及電纜用普通、重型及超重型交聯氯化聚乙烯套管規范 | Specification for General Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable |
| ANSI/ASTM D4314-1999 | 普通重負載和超重負載交叉鏈環的氯磺化聚乙烯電線和電纜護套規范(10.02) | Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D4363-1998 | 電線和電纜的熱塑氯化聚乙烯套管規范 | Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable |
| ANSI/ASTM D4565-1999 | 遠程通信電線和電纜用絕緣體和套管物理和環境性能特性的試驗方法(10.02) | Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
| ANSI/ASTM D4566-1998 | 遠程通信電線和電纜用絕緣體和套管電氣性能特性試驗方法(10.02) | Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
| ANSI/ASTM D470-2005 | 電線和電纜用交聯絕緣材料和護套的試驗方法(10.01) | Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01) |
| ANSI/ASTM D4730-2002 | 電信電線和電纜浸漬化合物規范 | Specification for Flooding Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4731-2002 | 電信電線和電纜用熱充填化合物規范 | Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4732-2002 | 電信電線和電纜用冷充填化合物規范 | Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4872-1999 | 電線和電纜填充化合物介電試驗的試驗方法 | Test Method for Dielectric Testing of Wire and Cable Filling Compounds |
| ANSI/ASTM D6070-2002 | 預組裝電線和電纜用光壁可盤繞聚乙烯(PE)管道物理特性試驗方法 | Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ANSI/ASTM D866-1999 | 電線及電纜用丁苯合成橡膠套規范 | Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01) |
| ANSI/ASTM F1883-2003 | 用美國線規(AWG)或米制單位選擇電線和電纜規格的實施規程 | Practice for Selection of Wire and Cable Size, in AWG or Metric Units |
| ANSI/EIA 654-2000 | 電線和電氣元件耐焊接熱試驗程序 | Resistance to Soldering Heat Test Procedure for Wire and Electrical Components |
| ANSI/EIA-364-92-1997 | 電連接器絕緣位移觸點(IDC)的電線彎曲試驗程序 | Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors |
| ANSI/EIA-364-93-1997 | 電連接器絕緣位移觸點(IDC)的電線重復連接和斷開試驗程序 | Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors |
| ANSI/EIA-654-2000 | 電線和電器元件耐焊接熱試驗程序 | Resistance to Soldering Heat Test Procedure for Wire and Electrical Components |
| ANSI/ICEA S-100-685-2006 | 室內/室外用熱塑性絕緣和有套通信站用電線 | Thermoplastic Insulated and Jacketed Telecommunications Station Wire for Indoor/Outdoor Use |
| ANSI/IEEE 1202-2006 | 電線和電纜的火焰?zhèn)鞑y(cè)試用標準 | Standard for Flame-Propagation Testing of Wire & Cable |
| ANSI/IEEE 1210-2004 | 使用電線和電纜測定電纜潤滑劑可混用性的標準試驗 | Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable |
| ANSI/IEEE 1410-2004 | 電力架空配電線的避雷性能提高的指南 | Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines |
| ANSI/IEEE 776-1993 | 供電線路和通信線感應配合指南 | Guide for Inductive Coordination of Electric Supply and Communication Lines |
| ANSI/IEEE 977-1991 | 輸電線結構基礎安裝指南 | Installataion of Foundations for Transmission Line Structures, Guide for |
| ANSI/IEEE C37.104-2002 | 交流配電線和輸電線用戶線斷路器自動重閉指南 | Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines |
| ANSI/IPC/EIA J-STD-002B-2003 | 元件引線、終端、接線片、端子和電線的可釬焊性試驗 | Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires |
| ANSI/NECA 104-2006 | 安裝鋁建筑電線和電纜的推薦規程 | Recommended Practice for Installing Aluminum Building Wire and Cable |
| ANSI/NEMA HP3-2000 | 電子和電氣用ET(250V)、E(600V)和EE(1000V)型PTFE(聚四氟乙烯)絕緣高溫架空電線 | Electrical and Electronic PTFE (Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire, Types ET (250 Volt), E (600 Volt) and EE (1000 Volt) |
| ANSI/NEMA HP4-2000 | KT型(250V)、K型(600V)和KK型(1000V)電和電子FEP(氟乙烯丙烯)絕緣高溫架空電線 | Electrical and Electronic FEP (Fluorinated Ethylene Propylene)-Insulated High Temperature Hook-Up Wire, Types KT (250 Volt), K (600 Volt) and KK (1000 Volt) |
| ANSI/NFPA 262-2002 | 電線和電纜的著火和煙霧特征試驗 | Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces |
| ANSI/SCTE 39-2002 | 共軸總線、饋電線和配線電纜用靜態最小彎曲半徑的試驗方法 | Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables |
| ANSI/TIA/EIA 102.BAEA-1-2002 | 項目25.數據綜述.附錄1.USB/PPP.新技術標準項目.數字無線電線路技術項目 | Project 25 - Data Overview - Addendum 1 - USB/PPP - New Technology Standards Project - Digital Radio Technical Standards |
| ANSI/TIA/EIA 102.BAEB-2-2002 | 項目25.分組數據規范.附錄1.USB/PPP.新技術標準項目.數字無線電線路技術標準項目 | Project 25 - Packet Data Specification - Addendum 1 - USB/PPP - New Technology Standards Project - Digital Radio Technical Standards |
| ANSI/TIA/EIA 102.BAEE-1-2002 | 項目25.無線電控制協議.附錄1.USB/PPP.新技術標準項目.數字無線電線路技術標準 | Project 25 - Radio Control Protocol - Addendum 1 - USB/PPP - New Technology Standards Project - Digital Radio Technical Standards |
| ANSI/TIA/EIA 455-200-2001 | 連接偏振嵌入損失.維護光纖和極化光纖軟電線裝置和電纜組件 | Insertion Loss of Connectorized Polarization - Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
| ANSI/UL 1565-2004 | 電線定位裝置 | Wire Positioning Devices |
| ANSI/UL 1581-2006 | 安全標準.電線、電纜和軟線的基準標準 | Standard for Safety - Reference Standard for Electrical Wires, Cables, and Flexible Cords |
| ANSI/UL 2438-2006 | 戶外季節性使用的電線連接的布線設備的安全標準 | Standard for Safety for Outdoor Seasonal-Use Cord-Connected Wiring Devices |
| ANSI/UL 2556-2007 | 電線和電纜試驗方法的安全標準 | Standard for Safety for Wire and Cable Test Methods |
| ANSI/UL 44-2005 | 橡膠絕緣電線和電纜 | Rubber-Insulated Wires and Cables |
| ANSI/UL 486A-486B-2006 | 電線連接器標準 | Standard for Wire Connectors (Proposals dated 3/17/06) |
| ANSI/UL 83-2003 | 熱塑性絕緣電線和電纜 | Thermoplastic-Insulated Wires and Cables |
| ANSI/UL 870-2003 | 電線管道、輔助槽和相關配件 | Wireways, Auxiliary Gutters, and Associated Fittings |
| ASTM B 47a-1995 | 銅架空電線的標準規范 | Standard Specification for Copper Trolley Wire |
| ASTM D 1047-2007 | 電線及電纜用聚氯乙烯套管的標準規范 | Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable |
| ASTM D 1248-2005 | 電線和電纜用聚乙烯塑料擠制材料標準規范 | Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable |
| ASTM D 1351-2002 | 電線和電纜用熱塑性聚乙烯絕緣材料的標準規范 | Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable |
| ASTM D 1523-2000 | 工作溫度為90℃的電線和電纜用合成橡膠絕緣材料的標準規范 | Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation |
| ASTM D 2219-2002 | 工作溫度60°C的電線和電纜用聚氯乙烯絕緣性的標準規范 | Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 °C Operation |
| ASTM D 2220-2002 | 工作溫度75°C的電線和電纜用聚氯乙烯絕緣性的標準規范 | Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75 °C Operation |
| ASTM D 2307a-2007 | 薄膜絕緣磁性圓電線的熱穩定性用標準試驗方法 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
| ASTM D 2308-2007 | 電線及電纜用熱塑性聚乙烯套管的標準規范 | Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ASTM D 2633-2002 | 電線及電纜用熱塑絕緣材料和護套的標準試驗方法 | Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM D 2655-2000 | 額定電壓為0到2000V的電線和電纜用交聯聚乙烯絕緣材料的標準規范 | Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V |
| ASTM D 2656-2006 | 額定電壓:2001～35000V的電線和電纜用交聯聚乙烯絕緣材料的標準規范 | Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V |
| ASTM D 2768-1995 | 電線和電纜用普通的乙丙橡膠護套標準規范 | Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable |
| ASTM D 2802-2003 | 電線及電纜用耐臭氧乙烯烴聚合物絕緣材料的標準規范 | Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable |
| ASTM D 3485-2002 | 預組合電線及電纜用平滑壁螺旋式聚乙烯導管的標準規范 | Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 3554-2007 | 工作溫度75°C的電線和電纜用不留痕跡的黑色高密度聚乙烯絕緣材料的標準規范 | Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation |
| ASTM D 3555-2007 | 90°C工作條件下的電線和電纜用不留痕跡的黑色交聯聚乙烯絕緣材料的標準規范 | Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90°C Operation |
| ASTM D 4244-1995 | 電線及電纜用普通的、重型及超重型丙烯腈-丁二烯/聚氯乙烯套管的標準規范 | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable |
| ASTM D 4245-2002 | 在干90℃/濕75℃時電線和電纜的耐臭氧熱塑性彈性體絕緣的標準規范 | Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation |
| ASTM D 4246-2002 | 在90℃時電線和電纜的耐臭氧熱塑性彈性體絕緣的標準規范 | Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation |
| ASTM D 4313-2003 | 電線及電纜用普通、重型及超重型交聯氯化聚乙烯(CM)套管標準規范 | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable |
| ASTM D 4314-2005 | 電線及電纜用普通、重型及超重型交聯氯磺化聚乙烯(CSM)套管的標準規范 | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable |
| ASTM D 4363-1998 | 電線和電纜用熱塑氯化聚乙烯套管規格標準規范 | Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable |
| ASTM D 4565-1999 | 遠程通信電線和電纜用絕緣體和套管的物理和環境性能特性的標準試驗方法 | Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 4566-2005 | 遠程通信電線和電纜用絕緣體和套管的電氣性能特性的標準試驗方法 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 470-2005 | 電線和電纜用交聯絕緣材料與套管的標準試驗方法 | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM D 4730-2002 | 電信電線和電纜用浸漬化合物的標準規范 | Standard Specification for Flooding Compounds for Telecommunications Wire and Cable |
| ASTM D 4731-2002 | 電信電線和電纜用熱充填化合物的標準規范 | Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4732-2002 | 電信電線和電纜用冷充填化合物的標準規范 | Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4872-1999 | 電線和電纜填充物介電性測試的標準試驗方法 | Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds |
| ASTM D 532-1990 | 電線及電纜用天然橡膠套管規格 | Natural Rubber Jacket for Wire and Cable |
| ASTM D 6070-2002 | 預組裝的電線和電纜用光壁可盤繞的聚乙烯(PE)管道物理特性的標準試驗方法 | Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 6096-2007 | 工作溫度90°C的電線和電纜用聚氯乙烯絕緣性的標準規范 | Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90 °C Operation |
| ASTM D 866-1999 | 電線及電纜用丁苯合成橡膠套 | Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable |
| ASTM F 16-1967 | 電子器件和電燈用電線及帶條的直徑或厚度測量方法 | Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps |
| ASTM F 2522-2005 | 測定帶電線路工具或齒條上用于防電弧傷害的護罩的防護性能的標準試驗方法 | Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards |
| ASTM F 777-1989 | 與火焰成60°角時電線絕緣材料的耐火性的試驗方法 | Test Method for Resistance of Electrical Wire Insulation Materials to Flame at 60 Degrees |
| IEEE 1025-1993 | 混凝土電線桿結構組裝和豎立安裝 | (Assembly and erection of concrete pole structures) |
| IEEE 1138-1994 | 用于電氣設備電線的架空復合光釬線纜的建造 | (Construction of composite fiber optic overhead ground wire (OPGW) for use on electric utility power lines) |
| IEEE 1410-1997 | 提高電力架空配電線路避雷性能指南 | (Guide for improving the lightning performance of electric power overhead distribution lines) |
| IEEE 977-1991 | 輸電線結構基礎安裝南指南 | (Guide to installation of foundations for transmission line structures) |
| IEEE C 135.61-1997 | 架空傳輸和配電線硬件試驗 | (Testing of overhead transmission and distribution line hardware) |
| IEEE C 37.104-2002 | 交流配電線和輸電線用線路斷路器的自動重閉指南 | (Guide for automatic reclosing of line circuit breakers for AC distribution and transmission lines) |
| UL 1063-1998 | 機床用電線和電纜 | (Machine-tool wires and cables ) |
| UL 1565-2002 | 電線定位裝置 | (Wire positioning devices ) |
| UL 1581-2001 | 電線、電纜和軟線的參考標準 | (Reference standard for electrical wires, cables, and flexible cords ) |
| UL 1951-1994 | 電線管道附件 | (Electric plumbing accessories ) |
| UL 2231-1-2002 | 電動車輛供電線路的人員保護系統.一般要求 | (Personnel protection systems for electric vehicle (EV) supply circuits - General requirements ) |
| UL 2231-2-2002 | 電動車輛供電線路的人員保護系統.充電系統用保護裝置的特殊要求 | (Personnel protection systems for electric vehicle (EV) supply circuits - Particular requirements for protective devices for use in charging systems ) |
| UL 817-2001 | 電線集和電力供給電線 | (Cord sets and power-supply cords ) |
| UL 83-2003 | 熱塑絕緣電線和電纜 | (Thermoplastic-insulated wires and cables ) |
| UL 870-1995 | 電線槽、輔助槽及有關配件 | (Wireways, auxiliary gutters, and associated fittings ) |
| UL 884-1998 | 地板下的電線管和配件 | (Underfloor raceways and fittings ) |
| 編號 | 中文名稱 | 英文名稱 |