| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 10257-1-1998 | 動力電纜或通信電纜鎧甲用鍍鋅或鋅合金的非合金鋼電線 第1部分：地面電纜 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| EN 10257-2-1998 | 動力電纜或通信電纜鎧甲用鍍鋅或鋅合金的非合金鋼電線 第2部分：海底電纜 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| EN 50109-1-1995 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第1部分：一般要求和試驗 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests |
| EN 50109-2-1-1995 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-1部分：射頻連接器和同軸接觸器的手工壓接工具 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with fixed dies,sies A to E,V and W |
| EN 50109-2-2-1995 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-2部分：射頻連接器和同軸接觸器的手動壓接工具 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with removadle and inter-changeadle dies,size A to G,Q to T,V and W |
| EN 50109-2-3-1995 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-3部分：電器插接連接件觸點的特殊要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
| EN 50109-2-4-1995 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-4部分：SMZ系列高頻插接連接的中間接點的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ |
| EN 50109-2-5-1995 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-5部分：數據總線用帶2個內芯的電纜連接的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
| EN 61334-3-21-1996 | 采用配電線載波系統的配電自動化 第3部分：主干線信號傳輸要求 第21節：中壓相間隔離電容耦合裝置 | Distribution automation using distribution line carrier systems - Part 3: Mains signalling requirements - Section 21: MV phase-to-phase isolated capacitive coupling device (IEC 61334-3-21:1996) |
| EN 61334-3-22-2001 | 采用配電線載波系統的配電自動化 第3-22部分：主干線信號傳輸要求 中壓相位接地和屏蔽接地插入耦合裝置 | Distribution automation using distribution line carrier systems - Part 3-22: Mains signalling requirements; MV phase-to-earth and screen-to-earth intrusive coupling devices (IEC 61334-3-22:2001) |
| EN 61334-4-1-1996 | 采用配電線載波系統的配電自動化 第4部分：數據通信協議 第1節：通信系統的參考模型 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 1: Reference model of the communication system (IEC 61334-4-1:1996) |
| EN 61334-4-32-1996 | 采用配電線載波系統的配電自動化 第4部分：數據通信協議 第32節：數據鏈層 邏輯鏈路控制(LLC) | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 32: Data link layer - Logical link control (LLC) (IEC 61334-4-32:1996) |
| EN 61334-4-33-1998 | 采用配電線載波系統的配電自動化 第4-33部分：數據通信協議 數據鏈層 定向連接協議 | Distribution automation using distribution line carrier systems - Part 4-33: Data communication protocols - Data link layer - Connection oriented protocol (IEC 61334-4-33:1998) |
| EN 61334-4-41-1996 | 采用配電線載波系統的配電自動化 第4部分：數據通信協議 第41節：應用協議 配電線路報文規范 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 41: Application protocols - Distribution line message specification (IEC 61334-4-41:1996) |
| EN 61334-4-42-1996 | 采用配電線載波系統的配電自動化 第4部分：數據通信協議 第42節：應用協議 應用層 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 42: Application protocols - Application layer (IEC 61334-4-42:1996) |
| EN 61334-4-511-2000 | 采用配電線載波系統的配電自動化 第4-511部分：數據通信協議 系統管理 CIASE協議 | Distribution automation using distribution line carrier systems - Part 4-511: Data communication protocols; Systems management; CIASE protocol (IEC 61334-4-511:2000) |
| EN 61334-4-512-2002 | 采用配電線載波系統的配電自動化 第4-512部分：數據通信協議 采用61134-5-1輪廓的系統管理 管理信息數據 | Distribution automation using distribution line carrier systems - Part 4-512: Data communication protocols; System management using profile 61334-5-1; Management Information Base (MIB) (IEC 61334-4-512:2001) |
| EN 61334-4-61-1998 | 采用配電線載波系統的配電自動化 第4-61部分：數據通信協議 網絡層 無連接協議 | Distribution automation using distribution line carrier systems - Part 4-61: Data communication protocols - Network layer - Connectionless protocol (IEC 61334-4-61:1998) |
| EN 61334-5-1-2001 | 采用配電線載波系統的配電自動化 第5-1部分：低層文件集 頻移鍵控文件集 | Distribution automation using distribution line carrier systems - Part 5-1: Lower layer profiles; The spread frequency shift keying (S-FSK) profile (IEC 61334-5-1:2001) |
| EN 61334-6-2000 | 采用配電線載波系統的配電自動化 第6部分：A-XDR解碼規則 | Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule (IEC 61334-6:2000) |
| EN 62196-1-2003 | 插頭、插座、機動車連接器和機動車電線入口 電動車輛充電 第1部分：交流達250A和400A的電動車輛的充電 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. (IEC 62196-1:2003) / Note: Endorsement notice |
| prEN 14229-2001 | 架空線用木電線桿 要求 | Wood poles for overhead lines - Requirements |
| prEN 60794-4-1-1998 | 光學纖維電纜 第４－１部分：高壓輸電線架空電纜 | IEC 60794-4-1: Optical fibre cables - Part 4-1: Aerial optical cables for high voltage power lines |
| prEN 60794-4-2003 | 光學纖維電纜 第４部分：高壓輸電線架空電纜 | |
| prEN 61334-3-1-1998 | 采用配電線載波系統的配電自動化 第3-1部分：主干線信號傳輸要求 頻帶和輸出電平 | Draft IEC 61334-3-1: Distribution automation using distribution line carrier systems - Part 3-1: Mains signalling requirements - Frequency bands and output levels |
| 編號 | 中文名稱 | 英文名稱 |