| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF C01-726-1988 | 電工詞匯.726章:輸電線和波導 | (Electrotechnical vocabulary. Chapter 726 : transmission lines and waveguides.) |
| NF C11-241-1-2002 | 大于45kV交流電架空電線.第1部分:一般要求和通用規范 | (Overhead electrical lines exceeding AC 45 kV - Part 1 : general requirements - Common specifications.) |
| NF C11-241-2-2002 | 大于45kV交流電架空電線.第2部分:國家標準特征索引 | (Overhead electrical lines exceeding AC 45 kV - Part 2 : index of National Normative Aspects.) |
| NF C11-241-3-8-2002 | 大于AC 45 kV架空電線.第3-8部分:國家標準特征集-法國 | (Overhead electrical lines exceeding AC 45 kV - Part 3-8 : set of National Normative Aspects - France.) |
| NF C31-800-1989 | 電氣構件中的導體和導線.鈮鈦多股非絕緣超導電線的特性測定 | (WIRES FOR ELECTRICAL MACHINERY AND APPARATUS. MEASUREMENT OF THE CHARACTERISTICS OF A NIOBIOM-TITANIUM MULTIFILAMENTARY SUPERCONDUCTING WIRE WITHOUT INSULATION.) |
| NF C32-102-4/A2-2003 | 額定電壓為450/750V及以下的交聯絕緣電纜.第4部分:軟電線和軟電纜 | (Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 4 : cords and flexible cables.) |
| NF C32-331-2002 | 裝置用絕緣電纜和軟線.裝在建筑物墻壁內電熱電纜加熱的設備用饋電線電纜 | (Insulated cables and flexible cords for installations - Cables for supply leads for heating equipment by means of heating cable for embedding in walls of building.) |
| NF C32-332-2002 | 裝置用絕緣電纜和軟線.裝在建筑物墻壁內用金屬鍍涂的電熱電纜加熱的設備用金屬鍍涂的饋電線電纜 | (Insulated cables and flexible cords for installations - Cables for supply leads with metallic covering for heating equipment by means of heating cables, with metallic covering, for embedding in walls) |
| NF C32-334-2002 | 裝置用絕緣電纜和軟線.裝在建筑物墻壁內用金屬鍍涂的電熱電纜加熱的設備用低電磁輻射的饋電線電纜 | (Insulated cables and flexible cords for installations - Cables for supply leads with low electromagnetic radiations for heating equipment by means of heating cables, with metallic covering, for embedd) |
| NF C46-903-22-2001 | 配電線路載體系統的配電自動化.第3-22部分:主要信令要求.MV相位到地面和網屏到地面的侵入式耦合裝置 | (Distribution automation using distribution line carrier systems - Part 3-22 : mains signalling requirements - MV phase-to-earth and screen-to-earth intrusive coupling devices.) |
| NF C46-904-1-1997 | 使用配電線路載波系統的自動分配裝置.第4部分:數據通訊協議.第1節:通訊系統的參考模型 | (Distribution automation using distribution line carrier systems. Part 4 : data communication protocols. Section 1 : reference model of the communication system.) |
| NF C46-904-3-2-1997 | 使用配電線路載波系統的自動分配裝置.第4部分:數據通訊協議.第1節:通訊系統的參考模型(LLC) | (Distribution automation using distribution line carrier systems. Part 4 : data communication protocols. Section 32 : data link layer. Logical link control (LLC).) |
| NF C46-904-4-2-1997 | 使用配電線路載波系統的自動分配裝置.第4部分:數據通訊協議.第42節:應用協議.應用層 | (Distribution automation using distribution line carrier systems. Part 4 : data communication protocols. Section 42 : application protocols. Application layer.) |
| NF C46-904-6-2001 | 使用配電線運載系統的配電車.第6部分:A-XDR編碼規則 | (Distribution automation using distribution line carrier systems - Partie 6 : A-XDR encoding rule.) |
| NF C46-905-1-2001 | 配電線路載體系統的配電自動化.第5-1部分:低層輪廓.擴展頻率移位鍵控輪廓 | (Distribution automation using distribution line carrier systems - Part 5-1 : lower layer profiles - The spread frequency shift keying (S-FSK) profile.) |
| NF C60-010-2000 | 連接裝置.銅電線用螺旋式和非螺旋式夾緊裝置的安全要求.第1部分:從0.2mm2到包括35mm2導線夾緊裝置的特殊要 | (Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1 : general requirements and particular requirements for clamping units) |
| NF C66-052-2003 | 架空電線用絕緣子.標稱電壓在1000V以上的交流電流用復合線柱絕緣子 | (Insulators for overhead lines - Composite line post insulators for alternative current with a nominal voltage superior 1 000 V.) |
| NF C71-112-1997 | 照明設備供電線路系統 | (Electrical supply track systems for luminaires.) |
| NF C71-112/A2-2001 | 燈具的供電線路系統 | (Electrical supply track systems for luminaires.) |
| NF C71-114-1-1995 | 照明設備供電線路系統.第2部分:混合供電線路系統.第1節:I類和III類 | (Electrical supply track systems for luminaires. Part 2 : mixed supply track systems. Section 1 : classes I et III.) |
| NF C93-521M1-1973 | 電子元件.低頻設備用聚氯乙烯絕緣和包皮的單線或鉸線電線和電纜.一般要求 | (ELECTRONIC COMPONENTS. LOW FREQUENCY EQUIPMENT WIRES AND CABLES WITH SOLID OR STRANDED CONDUCTORS,PVC,INSULATION AND SHEATH. GENERAL REQUIREMENTS.) |
| NF C93-522-1982 | 電子元件.繞制用電線.一般規定 | (Components for electronic equipment. Electrical wires for wrapped connexions. General requirements.) |
| NF F00-364-1991 | 通用鐵路設備.與電引線有關的產品.電線接頭的插片尺寸為:2.8×0.5,5×0.8,6.3×0.8mm | (RAILWAY MATERIAL IN GENERAL. PRODUCTS FOR ELECTRICAL CONNECTIONS. 2,8 X 0,5. 5 X 0,8. 6,3 X 0,8 MM.) |
| NF F56-152-1981 | 鐵路固定設備.通訊和信號裝置架空線路用器材.木電線桿鈄撐用卡箍 | (Fixed railway installations. Equipment for overhead electric telecommunication and signalling lines. Bracing collars for wooden posts.) |
| NF F61-013-1996 | 鐵路車輛.電線和電纜的安裝和固定 | (RAILWAY ROLLING STOCK. INSTALLATION AND FIXING OF ELECTRICALS WIVES AND CABLES.) |
| NF L53-200-1987 | 航空器材.可卸電線連接元件內部用插頭.一般標準 | (CONTACTS,ELECTRICAL,USED WITHIN ELEMENTS OF ELECTRICAL CONNECTION INCLUDING REMOVABLE CONTACTS. GENERAL STANDARD.) |
| NF R13-002-2-1991 | 道路車輛.通過連接和耦合的電干擾.第2部分:額定24伏特供電電壓的商用車輛.通過供電線和插件板網絡控制線的 | (ROAD VEHICLES. ELECTRICAL DISTURBANCE BY CONDUCTION AND COUPLING. PART 2 : COMMERCIAL VEHICLES WITH NOMINAL 24 V SUPPLY VOLTAGE. ELECTRICAL TRANSIENT CONDUCTION ALONG SUPPLY LINES AND BOARD NETWORK CONTROL LINES.) |
| NF R13-440-2-2002 | 道路車輛.車上電線束用連接.第2部分:定義、試驗方法和通用性能要求 | (Road vehicules - Connections for on-board electrical wiring harnesses - Part 2 : definitions, test methods and general performance requirements.) |
| 編號 | 中文名稱 | 英文名稱 |