| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 182-1972 | 電話和電報用鍍鋅電線規范 | Specification for galvanized line-wire for telephone and telegraph purposes |
| BS 3858-1992 | 電纜和電線用捆扎和識別套管規范 | Specification for binding and identification sleeves for use on electric cables and wires |
| BS 3G 198-2-1997 | 飛機電纜和設備電線用套管.第2部分:套管識別標簽規范 | Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes |
| BS 3G 198-4-1996 | 飛機電纜和設備電線套管.第4部分:粘結和絕緣用碳氟化合物熱收縮套管規范 | Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation |
| BS 4579-2-1973 | 電纜和電線連接器機械和壓合接頭性能規范.第2部分:鎳、鐵及鍍銅導線壓合接頭 | Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors |
| BS 4808-1-1972 | 電信用帶聚氯乙烯絕緣和聚氯乙烯絕緣護套的低頻電線及電纜規范.第1部分:一般要求和試驗 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests |
| BS 4808-2-1972 | 電信用帶聚氯乙烯絕緣和聚氯乙烯絕緣護套的低頻電線及電纜規范.第2部分:單股無屏蔽實心或絞合設備線 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single |
| BS 4G 178-2-1986 | 飛機電纜電線壓接頭.第2部分:壓接檢驗規范(包括用戶檢驗試驗) | Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests) |
| BS 5649-5-1982 | 路燈桿規范.第5部分:電氣接頭底座與電線敷設槽規范 | Lighting columns - Specification for base compartments and cableways |
| BS 5G 178-1-1993 | 飛機電纜和電線用壓合連接器.第1部分::元件和工具設計要求(包括試驗)規范 | Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools |
| BS 6195-2006 | 電纜.線圈端導線用橡膠或硅橡膠絕緣軟電纜及電線 | Electric cables - Rubber or silicone rubber insulated flexible cables and cords for coil end leads |
| BS 6913-6-1991 | 運土機械的操作和維修.第6部分:電線和電纜的識別和標志規范 | Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables |
| BS DD IEC TS 61334-5-4-2002 | 使用配線配電線路載波系統的配電自動化.低層輪廓.多載波調制(MCM)輪廓 | Distribution automation using distribution line carrier systems - Lower layer profiles - Multi-carrier modulation (MCM) profile |
| BS DD IEC TS 61334-5-5-2002 | 使用配線配電線路載波系統的配電自動化.低層輪廓.擴展譜帶快速跳頻(SS-FFH)輪廓 | Distribution automation using distribution line carrier systems - Lower layer profiles - Spread spectrum-fast frequency hopping (SS-FFH) profile |
| BS EN 12843-2004 | 預制混凝土制品.電線桿 | Precast concrete products - Masts and poles |
| BS EN 50109-1-1996 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.一般要求和試驗 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests |
| BS EN 50109-2-1-1996 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.特殊要求.射頻連接器和同軸接觸點.有固定模開式工具,規 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W |
| BS EN 50109-2-2-1996 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.特殊要求.射頻連接器和同軸接觸點的手工壓接工具.有可拆 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W |
| BS EN 50109-2-3-1996 | 手動壓接工具.低頻和高頻電線和電纜壓接連接工具.第2-3部分:電器插接件觸點專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors |
| BS EN 50109-2-4-1996 | 手動壓接工具.低頻和高頻電線和電纜壓接連接工具.專門要求.SMZ系列高頻插接連接的中間接點專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ |
| BS EN 50109-2-5-1996 | 手動壓接工具.低頻和高頻用電線和電纜壓接連接用工具.專門要求.數據總線用帶2個內芯的電纜連接專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications |
| BS EN 50266-1-2001 | 著火條件下電纜通用試驗方法.垂直固定的電線束或電纜的垂直火焰擴散試驗.裝置 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
| BS EN 50266-2-1-2001 | 著火條件下電纜的通用試驗方法.垂直固定的垂直束狀電線和電纜的垂直火焰擴散的試驗.試驗程序.類別A,F/R | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A F/R |
| BS EN 50266-2-2-2001 | 著火條件下電纜通用試驗方法.垂直固定的電線束和或電纜的垂直火焰擴散試驗.過程.類別A | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A |
| BS EN 50266-2-3-2001 | 著火條件下電纜通用試驗方法.垂直固定的電線束或電纜的垂直火焰擴散試驗.過程.類別B | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category B |
| BS EN 50266-2-4-2001 | 著火條件下電纜通用試驗方法.垂直固定的電線束或電纜的垂直火焰擴散試驗.過程.類別C | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C |
| BS EN 50266-2-5-2001 | 著火條件下電纜通用試驗方法.垂直固定的電線束或電纜的垂直火焰擴散試驗.過程.小電纜.類別D | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Small cables - Category D |
| BS EN 50317-2002 | 鐵路設施.集流系統.電桿和架空通信電線間的動態接觸測量的有校性要求 | Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
| BS EN 50412-2-1-2005 | 頻率1.6MHz到30MHz的低壓裝置用輸電線通信設備和系統.住宅、商業和工業環境.抗干擾性要求 | Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Residential, commercial and industrial environment - Immunity requirements |
| BS EN 60255-22-6-2001 | 繼電器.測量繼電器和保護設備的電干擾試驗.抗射頻場饋電線感應干擾試驗.第22-6部分:測量繼電器和保護設備的 | Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields |
| BS EN 60332-1-1-2005 | 著火條件下電纜和光纜的試驗.單根絕緣電線或電纜的垂直火焰蔓延的試驗.裝置 | Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus |
| BS EN 60332-1-2-2004 | 著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.1kW預混合火焰規程 | Tests on electric and optical fibre cables under fire conditions - Test for vertfical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
| BS EN 60332-1-3-2004 | 著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.燃燒的微滴/顆粒的測定程序 | Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single vertical insulated wire or cable - Procedure for determination of flaming droplets/particles |
| BS EN 60332-2-1-2005 | 著火條件下電纜和光纜的試驗.單根小型絕緣電線或電纜的垂直火焰蔓延的試驗.裝置 | Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| BS EN 60332-2-2-2004 | 著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.擴散火焰法 | Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| BS EN 60495-1994 | 單邊頻帶供電線載波端子 | Single sideband power-line carrier terminals |
| BS EN 61334-3-21-1997 | 配電線路載體系統配電自動化.電力線信號要求.MV相間絕緣電容耦合裝置 | Distribution automation using distriubution line carrier systems - Mains signalling requirements - MV phase-to-phase isolated capacitive coupling device |
| BS EN 61334-3-22-2001 | 配電線路載波系統配電自動化.主要信令要求.MV 相位到地面和網屏到地面的侵入式耦合裝置 | Distribution automation using distriubution line carrier systems - Mains signalling requirements - MV phase to earth and screen to earth coupling devices |
| BS EN 61334-4-32-1997 | 配電線路載波系統配電自動化.第4部分:數據通信協議.第32節:數據鏈層.邏輯鏈結控制(LLC) | Distribution automation using distribution line carrier systems - Data communication protocols - Data link layer - Logical link control (LLC) |
| BS EN 61334-4-33-1998 | 配電線路載波系統配電自動化.數據通信協議.數據鏈接層.連接協議 | Distribution automation using distribution line carrier systems - Data communication protocols - Data link layer - Connection oriented protocol |
| BS EN 61334-4-41-1998 | 配電線路載波系統配電自動化.數據通信協議.應用協議.配線信號規范 | Distribution automation using distribution line carrier systems - Data communication protocols - Application protocols - Distribution line message specification |
| BS EN 61334-4-42-1997 | 配電線路載波系統配電自動化.數據通信協議.應用協議.應用層 | Distribution automation using distribution line carrier systems - Data communication protocols - Application protocols - Application layer |
| BS EN 61334-4-511-2001 | 配電線路載波系統配電自動化.數據通信協議.系統管理.CIASE協議 | Distribution automation using distribution line carrier systems - Data communication protocols - Systems management - CIASE protocol |
| BS EN 61334-4-512-2002 | 使用配電線路載體系統的配電自動化.數據通信協議.使用61334-5-1概要的系統管理.管理信息基礎 | Distribution automation using distribution line carrier systems - Data communication protocols - System management using profile 61334-5-1 - Management Information Base (MIB) |
| BS EN 61334-4-61-1998 | 配電線路載體系統配電自動化.數據通信協議.網絡層.非連接協議 | Distribution automation using distribution line carrier systems - Data communication protocols - Network layer - Connectionless protocol |
| BS EN 61334-5-1-2001 | 配電線路載波系統配電自動化.低層剖面.擴展頻率漂移鍵控剖面 | Distribution automation using distribution line carrier systems - Lower layer profiles - The spread frequency shift keying (S-FSK) profile |
| BS EN 61334-6-2001 | 配電線路載波系統配電自動化.A-XDR編碼規則 | Distribution automation using distribution line carrier systems - A-XDR encoding rule |
| BS EN ISO 8092-3-1999 | 道路車輛.車上安裝電線束的連接.多極連接的標記.尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for multi-pole connections - Dimensions and specific requirements |
| BS EN ISO 8092-4-1999 | 道路車輛.車上安裝電線束的連接.單極和多極連接用銷釘.尺寸和特定要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Pins for single- and multi-pole connections - Dimensions and specific requirements |
| BS G 198-5-1997 | 航空用電纜和設備電線套筒.熱收縮模型規范 | Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes |
| BS IEC 61334-1-1-1997 | 采用配電線承載系統自動配電.概論.配電自動化系統結構指南 | Distribution automation using distribution line carrier systems - General considerations - Guide to distribution automation system architecture |
| BS IEC 61334-1-2-1998 | 使用配電線路載波系統的自動配電.一般考慮.規范指南 | Distribution automation using distribution line carrier systems - General considerations - Guide for specification |
| BS IEC 61334-1-4-1998 | 使用配電線路載波系統的自動配電.一般考慮.關于中壓和低壓配電干線數據傳輸參數的識別指南 | Distribution automation using distribution line carrier systems - General considerations - Guide to identification of data transmission parameters concerning medium and low-voltage distribution mains |
| BS IEC 61334-3-1-2002 | 配電線路輸送系統的配電自動化.電源信號要求.頻帶和輸出電平 | Distribution automation using distribution line carrier systems - Mains signalling requirements - Frequency bands and output levels |
| BS IEC 61865-2002 | 架空電線.帶電部分和障礙物間距離的電氣元件的計算.計算方法 | Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation |
| BS IEC TR 61334-5-2-1998 | 使用配電線路載波系統的自動配電.低層輪廓.頻移鍵控(FSK)輪廓 | Distribution automation using distribution line carrier systems - Lower layer profiles - Lower layer profiles - Frequency shift keying (FSK) profile |
| BS ISO 14624-2-2004 | 航天系統.材料的安全和兼容性.電線絕緣和附屬材料易燃性的測定 | Space systems - Safety and compatibility of materials - Determination of flammability of electrical-wire insulation and accessory materials |
| 編號 | 中文名稱 | 英文名稱 |