| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 14384-1984
| 泡沫混合材料用比列調節器指示器
| Inductor proportioner for foam compound
|
| DIN 3388-4-1984
| 煤氣設備用、熱控制、接到設備上的煙道氣體調節器.要求、檢驗、標志
| Flue gas dampers for gas appliances, thermaly controlled, connected to the appliances; requirements, testing, marking
|
| DIN 51515-1-2001
| 汽輪機用潤滑劑和調速液規范.第1部分:一般應用的L-TD.規范
| Lubricants and governor fluids for turbines - Specifications - Part 1: L-TD for normal service; Specifications
|
| DIN 51515-2-2004
| 汽輪機用潤滑劑和調速液.第2部分:高溫服務用L-TG規范
| Lubricants and governor fluids for turbines - Part 2: L-TG for higher temperature service, Specifications
|
| DIN 68856-4-1983
| 家具用五金件.家具裝配附件術語.閂、掛鉤.調節器
| Hardware for furniture; terms for furniture fittings; holding devices, flap stays, lid stays
|
| DIN EN 12067-1-1998
| 氣體燃燒爐和氣體燃燒裝置的氣體/空氣混合比控制調節器.第1部分:氣動型
| Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types; German version EN 12067-1:1998
|
| DIN EN 12078-1998
| 氣體燃燒器和氣體燃燒裝置的“零"基準調節器
| Zero governors for gas burners and gas burning appliances; German version EN 12078:1998
|
| DIN EN 125400-1993
| 分規范.感應線圈和調諧變壓器中的磁氧體鐵芯用調節器
| Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers; german version EN 125400:1991
|
| DIN EN 125401-1993
| 空白詳細規范.感應線圈和調諧變壓器中的磁氧體鐵芯用調節器
| Blank detail specification: adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers; german version EN 125401:1991
|
| DIN EN 12864-2006
| 容量小于或等于4kg/h、最大輸出壓小于或等于200mbar的不可調低壓調節器及其相關的丁烷、丙烷或其混合物用安
| Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 12864:2001 + A1:2003 + A2:2005
|
| DIN EN 13785-2005
| 丁烷、丙烷和其混合物用最大容量100 kg/h及以下和最大輸出壓力4巴及以下的調節器及其相關安全設備(EN 12864
| Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butan, propane ot their mixtures; German version EN 13785:2005
|
| DIN EN 13787-2002
| 入口壓力達100巴的氣體壓力調節器和相關安全裝置用彈性體; 德文版本 EN 13787:2001
| Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar; German version EN 13787:2001
|
| DIN EN 13918-2003
| 氣焊設備.焊接、切割和相關工藝用整體流量計式調節器.分類、規范和試驗
| Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests; German version EN 13918:2003
|
| DIN EN 246-2003
| 衛生設備旋塞.流速調節器的一般規范
| Sanitary tapware - General specifications for flow rate regulators; German version EN 246:2003
|
| DIN EN 257-1996
| 煤氣設備機械溫度調節器
| Mechanical thermostats for gas burning appliances; German version EN 257:1992 + A1:1996
|
| DIN EN 334-2005
| 入口壓力100巴及以下用氣體壓力調節器
| Gas pressure regulators for inlet pressures up to 100 bar; German version EN 334:2005
|
| DIN EN 60730-2-11-1994
| 家用及類似用途的電器自動控制裝置.第2部分:電能調節器的特殊要求
| Automatic electrical controls for household and similar use; part 2: particular requirements for energy regulators (IEC 60730-2-11:1993); German version EN 60730-2-11:1993
|
| DIN EN 60730-2-11/A1-1997
| 家用和類似用途的自動電氣控制器.第2部分:電能調節器的特殊要求.修改件A1
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for energy regulators; Amendment A1 (IEC 60730-2-11:1993/A1:1994, modified); German version EN 60730-2-11:1993/A1:1997
|
| DIN EN 60730-2-11/A11-2005
| 家用和類似用途自動電控裝置.第2-11部分:能量調節器的特殊要求
| Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators; German version EN 60730-2-11:1993/A11:2005
|
| DIN EN 60730-2-11/A2-1998
| 家用和類似用途的電器自動控制器.第2部分:能量調節器特殊要求.修改件A2
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for energy regulators; Amendment A2 (IEC 60730-2-11:1993/A2:1997); German version EN 60730-2-11:1993/A2:1998
|
| DIN EN 60730-2-15/A1-1998
| 家用和類似用途的電器自動控制器.第2部分:鍋爐用浮子式或電極式探測器自動電傳感水位調節器和控制器特殊要
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications; Amendment A1 (IEC 60730-2-15:1994/A1:1997); German version EN 60730-2-15:1995/A1:1998
|
| DIN EN 61683-2000
| 光伏系統.功率調節器.效率測量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC 61683:1999); German version EN 61683:2000
|
| DIN EN 61800-1-1999
| 可調速的電驅動系統.第1部分:一般要求.低電壓可調速的直流電驅動系統的額定值規范
| Adjustable speed electrical power drive systems - Part 1: General requirements; rating specifications for low voltage adjustable speed d.c. power drive systems (IEC 61800-1:1997); German version EN 61800-1:1998
|
| DIN EN 61800-2-1999
| 可調速的電驅動系統.第2部分:一般要求.低電壓可調頻的交流電驅動系統的額定值規范
| Adjustable speed electrical power drive systems - Part 2: General requirements; rating specifications for low voltage adjustable frequency a.c. power drive systems (IEC 61800-2:1998); German version EN 61800-2:1998
|
| DIN EN 61800-3-2005
| 可調速電力傳動系統.第3部分:電磁兼容要求和特定試驗方法
| Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods (IEC 61800-3:2004); German version EN 61800-3:2004
|
| DIN EN 61800-4-2003
| 可調速的電力驅動系統.第4部分:一般要求.1000V至35KV交流電力驅動系統的額定值規范
| Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV (IEC 61800-4:2002); German version EN 61800-4:2003
|
| DIN EN 61800-5-1 Berichtigung 2-2006
| 可調速的電驅動系統.第5-1部分:安全要求.電、熱及能量
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy (IEC 61800-5-1:2003-02); German version EN 61800-5-1:2003, Corrigenda to DIN EN 61800-5-1 (VDE 0160-105):2003-09
|
| DIN EN 61800-5-1-2003
| 可調速電力傳動系統.第5-1部分:安全要求.電、熱及能量
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy (IEC 61800-5-1:2003-02); German version EN 61800-5-1:2003
|
| DIN EN 61822-2003
| 機場照明和航路信標用電氣裝置.恒流調節器
| Electrical installations for lighting and beaconing of aerodromes - Constant current regulator (IEC 61822:2002, modified); German version EN 61822:2003
|
| DIN EN 738-4-2002
| 醫用氣體調壓器.第4部分:醫療設備內置低壓調節器(包括修改件A1)
| Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment (includes Amendment A1:2002); German version EN 738-4:1998 + A1:2002
|
| DIN EN ISO 10524-1-2006
| 醫用氣體設備用的壓力調節器.第1部分:壓力調節器和帶流量計設備的壓力調節器(ISO 10524-1-2006)
| Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006); German version EN ISO 10524-1:2006
|
| DIN EN ISO 10524-2-2006
| 醫用氣體用壓力調節器.第2部分:進氣壓力調節器和線性壓力調節器(ISO 10524-2:2005)
| Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005); German version EN ISO 10524-2:2006
|
| DIN EN ISO 10524-3-2006
| 醫療氣體用壓力調節器.第3部分:帶氣缸閥的壓力調節器(ISO 10524-3:2005)
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005); German version EN ISO 10524-3:2006
|
| DIN EN ISO 2503-1998
| 氣焊設備.300巴以下的焊接、切割和相關工藝中使用的氣體瓶的壓力調節器
| Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998); German version EN ISO 2503:1998
|
| 編號 | 中文名稱 | 英文名稱 |
|---|