| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60073-2002
| 人-機接口,標記和鑒別用的基本原理和安全原則.指示設備和調節器的編碼原理
| Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
|
| IEC 60535-1977
| 噴流扇和調速器
| Jet fans and regulators
|
| IEC 60665-1980
| 家用和類似用途的交流排氣扇及其調速器
| A.C. electric ventilating fans and regulators for household and similar purposes
|
| IEC 60723-5-1-1993
| 通信用電感器和變壓器磁芯 第5部分:分規范:用于可調電感器和變壓器中的磁性氧化物磁芯的調節器 第1節:空白
| Inductor and transformer cores for telecommunications; part 5: sectional specification: adjusters used with magnetic oxide cores for use in adjustable inductors and transformers; section 1: blank detail specification; assessment level A
|
| IEC 60723-5-1993
| 通信用電感器和變壓器磁芯 第5部分:分規范:用于可調電感器和變壓器中的磁性氧化物磁芯的調節器
| Inductor and transformer cores for telecommunications; part 5: sectional specification: adjusters used with magnetic oxide cores for use in adjustable inductors and transformers
|
| IEC 60730-2-11-1997
| 家用和類似用途的電氣自動控制器 第2-11部分:能量調節器的特殊要求
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for energy regulators
|
| IEC 60879 Corrigendum 1-1992
| 電環流扇和調速器的性能與結構
| Performance and construction of electric circulating fans and regulators
|
| IEC 60879-1986
| 環流扇和調速器的性能與結構
| Performance and construction of electric circulating fans and regulators
|
| IEC 61683-1999
| 光伏系統 功率調節器 效率測量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
|
| IEC 61800-1-1997
| 可調速電力傳動系統 第1部分:一般要求 低壓可調速直流電力傳動系統的定額規范
| Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems
|
| IEC 61800-2-1998
| 可調速電力傳動系統 第2部分:一般要求 低壓可調頻交流電力傳動系統的定額規范
| Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems
|
| IEC 61800-3-2004
| 可調速電力傳動系統 第3部分:電磁兼容要求和特定試驗方法
| Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
|
| IEC 61800-4-2002
| 可調速的電氣動力驅動系統.第4部分:一般要求.大于1000V但不超過35KV交流電的交流動力驅動系統的等級規范
| Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1000 V a.c., and not exceeding 35 kV
|
| IEC 61800-5-1 Corrigendum 1-2003
| 可調速電力傳動系統.第5-1部分:安全要求.電、熱、能.技術勘誤1
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy; Corrigendum 1
|
| IEC 61800-5-1-2003
| 可調速的電驅動系統.第5-1部分:安全要求.電、熱及能量
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy
|
| IEC 61822-2002
| 機場的照明和信號燈的電氣裝置.恒流調節器
| Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
|
| IEC/TR 61800-6-2003
| 可調速電力驅動系統.第6部分:負載類型和相應電流額定值的測定指南
| Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings
|
| ISO 10524-1-2006
| 醫用氣體設備用的壓力調節器.第1部分:壓力調節器和帶流量計的壓力調節器
| Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices
|
| ISO 10524-2-2005
| 醫用氣體用壓力調節器.第2部分:進氣壓力調節器和線性壓力調節器
| Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
|
| ISO 10524-3-2005
| 醫用氣體設備用的壓力調節器.第3部分:帶氣瓶閥的壓力調節器
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
|
| ISO 14617-8-2002
| 圖表用圖形符號.第8部分:閥門和氣流調節器
| Graphical symbols for diagrams - Part 8: Valves and dampers
|
| ISO 15500-10-2001
| 道路車輛 壓縮天然氣(CNG)燃料系統部件 第10部分:氣流調節器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster
|
| ISO 23551-2-2006
| 氣體燃燒器和燃?xì)庠O(shè)備用安全和控制裝置.特殊要求.第2部分:壓力調節器
| Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 2: Pressure regulators
|
| ISO 3046-4-1997
| 往復式內燃機 性能 第4部分:調速
| Reciprocating internal combustion engines - Part 4: Speed governing
|
| ISO 6263-1997
| 液壓傳動 調速閥 安裝面
| Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
|
| ISO 7291-1999
| 氣焊設備 用于300 bar以下的焊接、切割及相關工藝用匯流系統上的壓力調節器
| Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar
|
| ISO 7292-1997
| 焊接、切割和相關工藝用氣瓶流量調節器 分類和規范
| Flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification and specifications
|
| ISO 8854-1988
| 道路車輛 帶調節器的交流發電機 試驗方法和一般要求
| Road vehicles; alternators with regulators; test methods and general requirements
|
| 編號 | 中文名稱 | 英文名稱 |
|---|