| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 12067-1-1998+A1-2003
| 燃?xì)鈬娮旌腿細庋b置用燃?xì)?空氣混合調節器 第1部分：氣動型
| Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types
|
| EN 125400-1991
| 分規范:用于電感器和調諧變壓器中的磁性氧化磁芯的調節器
| Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers
|
| EN 125401-1991
| 空白詳細規范：用于電感器和調諧變壓器中的磁性氧化(鐵氧體)磁芯的調節器
| Blank detail specification - Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers
|
| EN 13787-2001
| 進口壓力最大可達100bar的氣壓調節器及其相關安全設備用彈性體
| Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
|
| EN 246-2003
| 衛生用水龍頭 流速調節器通用規范
| Sanitary tapware - General specifications for flow rate regulators
|
| EN 334-1999+A1-2000
| 入口壓力不超過100 bar的氣體壓力調節器
| Gas pressure regulators for inlet pressures up to 100 bar
|
| EN 60073-2002
| 人-機界面、標志和識別的基本和安全原則 指示器和調節器的編碼原則
| Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators (IEC 60073:2002) / Note: Endorsement notice
|
| EN 60534-6-1-1997
| 工業過程控制閥 第6－1部分：定位器聯到控制閥執行機構的安裝細則 第1節：直線傳動裝置上調節器的安裝
| Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)
|
| EN 60730-2-11-1993+A1-1997+A2-1998
| 家用和類似用途的電氣自動控制器 第２－１１部分：能量調節器的特殊要求
| Automatic electrical controls for household and similar use; part 2: particular requirements for energy regulators (IEC 60730-2-11:1993)
|
| EN 61136-1-1995
| 半導體電力變流器 可調速電氣傳動系統 一般要求 第1部分：特別是對直流電動機傳動的定額規范
| Semiconductor power convectors - Adjustable speed electric drive systems - General requirements - Part 1: Rating specifications, particularly for d.c. motor drives (IEC 61136-1:1992, modified)
|
| EN 61683-2000
| 光伏系統 功率調節器 效率測量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC 61683:1999)
|
| EN 61800-1-1998
| 可調速電力傳動系統 第1部分：一般要求 低壓可調速直流電力傳動系統的額定規范
| Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems (IEC 61800-1:1997)
|
| EN 61800-2-1998
| 可調速電力傳動系統 第2部分：一般要求 低壓可調頻交流電力傳動系統的額定規范
| Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems (IEC 61800-2:1998)
|
| EN 61800-3-1996
| 可調速電力傳動系統 第3部分：包括特定試驗方法的電磁兼容產品標準
| Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods (IEC 61800-3:1996)
|
| EN 61800-3-1996+A11-2000
| 可調速電力傳動系統 第3部分：包括特定試驗方法的電磁兼容產品標準
| Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods (IEC 61800-3:1996)
|
| EN 61800-4-2003
| 可調速電力傳動系統 第4部分：一般要求 超過1000V并且不超過35KV的交流電力傳動系統的額定規范
| Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV (IEC 61800-4:2002) / Note: Endorsement notice
|
| EN 61800-5-1-2003
| 可調速電力傳動系統 第5-1部分：安全要求 電氣、熱量和能量
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy (IEC 61800-5-1:2003) / Note: Endorsement notice
|
| EN 738-1-1997+A1-2002
| 醫用氣體用壓力調節器 第1部分：壓力調節器和有流量計裝置的壓力調節器
| Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow metering devices
|
| EN 738-2-1998
| 醫用氣體用壓力調節器 第2部分：多管和單管壓力調節器
| Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
|
| EN 738-3-1998+A1-2002
| 醫用氣體用壓力調節器 第3部分：帶氣瓶閥的壓力調節器
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
|
| EN 738-4-1998+A1-2002
| 醫用氣體用壓力調節器 第4部分：醫療設備用低壓壓力調節器
| Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment
|
| EN ISO 7291-2001
| 氣焊設備 用于300bar以下的焊接、切割及相關工藝用匯流系統上的壓力調節器
| Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999)
|
| EN ISO 8282-1997
| 牙科設備 汞及合金混和器和調節器
| Dental equipment - Mercury and alloy mixers and dispensers (ISO 8282:1994)
|
| ENV 50231-1997
| 導航用地面照明電子設備 恒流調節器：設備規范和試驗
| Aeronautical ground lighting electrical installation - Constant current regulator - Equipment specifications and tests
|
| HD 477.2.4 S1-1987
| 地面無線電中繼系統用設備的測量方法 第2部分：子系統測量 第4節：頻率調節器
| Methods of measurement for equipment used in terrestrial radio-relay systems - Part 2: Measurements for sub-systems - Section 4: Frequency modulators
|
| prEN 12067-2-2001
| 燃?xì)鈬娮旌腿細庋b置用燃?xì)?空氣混合調節器 第2部分：電子型
| Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types
|
| prEN 50314-1-1999
| 光電系統 電荷調節器 第1部分：安全性 測試要求及程序
| Photovoltaic systems - Charge regulators - Part 1: Safety - Test requirements and procedures
|
| prEN 50314-2-1999
| 光電系統 電荷調節器 第2部分：EMC-測試要求及程序
| Photovoltaic systems - Charge regulators - Part 2: EMC - Test requirements and procedures
|
| prEN 50314-3-1999
| 光電系統 電荷調節器 第3部分：性能 測試要求及程序
| Photovoltaic systems - Charge regulators - Part 3: Performance - Test requirements and procedures
|
| 編號 | 中文名稱 | 英文名稱 |
|---|