| 編號 | 中文名稱 | 英文名稱 |
|---|
| NF A84-432-2003
| 氣焊設備.焊接、切割和相關工藝的氣瓶上用整體流量計式調節器.分類、規范和試驗
| (Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests.)
|
| NF A84-433-2001
| 氣焊設備.小于等于300bar的焊接、切削及相關工藝用多頭管系用壓力調節器
| (Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar.)
|
| NF C47-110-1981
| 家用自動裝置.環境恒溫調節器
| (Automatic devices for household use. Rooms thermostats.)
|
| NF C47-741-1993
| 家用和類似用途的自動電控制設備.第2部分:能量調節器的特殊要求
| (Automatic electrical controls for household and similar use. Part 2 : particular requirements for energy regulators.)
|
| NF C47-744-1998
| 家用和類似用途的自動電控制設備.第2部分:電調節器的特殊要求
| (Automatic electrical controls for household and similar use. Part 2 : particular requirements for electric actuators.)
|
| NF C47-744/A1-2001
| 家用及類似用途自動電控制裝置.第2部分:電調節器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-14 : particular requirements for electric actuators.)
|
| NF C53-231-2002
| 半導體電力變換器.可調速電驅動裝置.一般要求.第1部分:直流電動機的額定值規范
| (Semiconductor power convectors - Adjustable speed electric drive systems - General requirements - Part 1 : rating specifications, particularly for D.C. motor drives.)
|
| NF C53-240-1-1999
| 可調速的電驅動系統.第1部分:一般要求.低電壓可調速的直流電驅動系統的額定值規范
| (Adjustable speed electrical power drive systems - Part 1 : general requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems.)
|
| NF C53-240-2-1999
| 可調速的電驅動系統.第2部分:一般要求.低電壓可調頻的交流電驅動系統的額定值規范
| (Adjustable speed electrical power drive systems - Part 2 : general requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems.)
|
| NF C53-240-4-2003
| 可調速的電力傳動系統.第4部分:一般要求.1000V至35KV交流電力傳動系統的額定規格
| (Adjustable speed electrical power drive systems - Part 4 : general requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV.)
|
| NF C53-240-5-1-2003
| 可調速的電驅動系統.第5-1部分:安全要求.電、熱及能量
| (Adjustable speed electrical power drive systems - Part 5-1 : safety requirements - Electrical, thermal and energy.)
|
| NF C79-143-1999
| 機械安全.指示、標記和活動.調節器的定位和操作要求
| (Safety of machinery. Indication, marking and actuation. Part 3 : requirements for the location and operation of actuators.)
|
| NF D18-204-2003
| 衛生設備旋塞.流速調節器的一般規范
| (Sanitary tapware - General specifications for flow rate regulators.)
|
| NF D36-302-1991
| 家用煤氣設備用低壓后力調節器
| (Pressure governors for gas appliances for inlet pressures up to 200 mbar.)
|
| NF D36-307-2002
| 容量小于或等于4kg/h、最大輸出壓小于或等于200mbar的不可調低壓調節器及其相關的用于丁烷、丙烷或其混合物
| (Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar with a capacity of less than or equal to 4 kg/h, and their associated safety devices for buta)
|
| NF D36-361-1998
| 氣體燃燒器和燃氣設施用零點調節器
| (Zero governors for gas burners and gas burning appliances.)
|
| NF E29-171-1999
| 入口壓力最大達100bar的氣壓調節器
| (Gas pressure regulators for inlet pressures up to 100 bar.)
|
| NF E29-171/A1-2001
| 入口壓力100巴以下的氣體壓力調節器
| (Gas pressure regulators for inlet pressures up to 100 bar.)
|
| NF E29-179-2002
| 入口壓力達100巴的壓力調節器和相關安全裝置用彈性體
| (Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar.)
|
| NF E49-330-1-2000
| 氣流動力.壓縮空氣調節器和過濾器調節器.第1部分:包括在供應商和產品標記要求內的的主要特性
| (Pneumatic fluid power - Compressed air regulators and filters-regulators - Part 1 : main characteristics to be included in literature from suppliers and product-marking requirements.)
|
| NF E49-330-2-2000
| 氣流動力.壓縮空氣調節器和過濾器調節器.第2部分:包括在供應商文件內的主要特性測定的試驗方法
| (Pneumatic fluid power - Compressed air regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers.)
|
| NF E51-718-1998
| 建筑物通風.氣體終端設備.調節器和閥門的動力學試驗
| (Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.)
|
| NF L34-420-1966
| 操縱轉速計和螺旋漿調速器等用撓性軸.(RECH.)
| (FLEXIBLE SHAFTS FOR CONTROLLING TACHOMETERS,PROPELLOR REGULATORS,ETC. (RECH.).)
|
| NF R13-107-1970
| 發電機電磁調節器.螺釘固定
| (ELECTROMAGNETIC REGULATORS FOR GENERATORS. SCREW MOUNTING.)
|
| NF R13-201-1966
| 交流發電機及其調節器用接線柱
| (TERMINALS FOR ALTERNATORS AND THEIR REGULATORS.)
|
| NF S87-010-1996
| 大型鐘表.表針調節器
| (Hall clocks. Hands adjustment.)
|
| NF S95-159-1997
| 與醫療麻醉劑一起使用的壓力調節器.第1部分:壓力調節器和帶流量測量裝置的壓力調節器(歐洲標準EN 738-1)
| (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 1 : PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES. (EUROPEAN STANDARD EN 738-1).)
|
| NF S95-159/A1-2002
| 醫用氣體壓力調節器.第1部分:壓力調節器和帶流量計的壓力調節器
| (Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow metering devices.)
|
| NF S95-171-1999
| 醫用氣體用壓力調節器.多功能的和線狀壓力調節器(歐洲標準738-2)
| (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 2 : MANIFOLD AND LINE PRESSURE REGULATORS. (EUROPEAN STANDARD EN 738-2).)
|
| NF S95-178-1998
| 醫用氣體用壓力調節器.第3部分:與鋼瓶閥門相結合的壓力調節器(歐洲標準EN 738-3)
| (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 3 : PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES. (EUROPEAN STANDARD EN 738-3).)
|
| NF S95-178/A1-2002
| 醫用氣體壓力調節器.第3部分:帶瓶閥的壓力調節器
| (Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.)
|
| NF S95-179-1998
| 用于醫用氣體的壓力調節器.第4部分:結合醫用設備的低壓調節器(歐洲標準EN 738-4)
| (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 4 : LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT. (EUROPEAN STANDARD EN 738-4).) |
| NF S95-179/A1-2002
| 醫用氣體壓力調節器.第4部分:裝入醫療設備的低壓調節器
| (Pressure regulators for use with medical gases - Part 4 : low-pressure regulators intended for incorporation into medical equipment.)
|
| NF T51-114-1979
| 塑料.在特定溫度下、在溫度調節器殼體內機械特性的測定方法
| (PLASTICS. METHODS FOR DETERMINING MECHANICAL CHARACTERISTICS AT TEMPERATURE SPECIFIED IN A ENCLOSURE WITH REGULATION OF THE TEMPERATURE.)
|
| NF X35-101-1-1997
| 機械安全.顯示和控制調節器設計的人類工效學要求.第1部分:人與顯示和控制調節器相互作用的一般原則(歐洲標
| (SAFETY OF MACHINERY. ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS. PART 1 : GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS. (EUROPEAN STANDARD EN 894-1).)
|
| NF X35-101-2-1997
| 機械安全.顯示和控制調節器設計的人類工效學要求.第2部分:顯示
| (Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 2 : displays.)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|