| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI B18.11-1961
| 微型螺釘
| Miniature Screws
|
| ANSI B18.2.3.8M-1981
| 米制六角方頭螺釘
| Screws, Metric Hex Lag
|
| ANSI/ASME B107.15-2002
| 平頭和十字槽螺釘旋具
| Flat-Tip and Phillips Screwdrivers
|
| ANSI/ASME B107.30-2002
| 十字頭螺釘旋具
| Cross Tip Screwdrivers
|
| ANSI/ASME B107.46M-2004
| 螺柱、螺釘和管取出器.安全要求
| Stud, Screw and Pipe Extractors - Safety Requirements
|
| ANSI/ASME B18.13-1996
| 英制SEMS螺釘和墊圈組件
| Screw and Washer Assemblies - SEMS (Inch Series)
|
| ANSI/ASME B18.13.1M-1998
| 螺釘和墊圈組件.SEMS(米制)
| Screws and Washer Assemblies - SEMS (Metric Series)
|
| ANSI/ASME B18.2.1-1996
| 四方和六角形螺栓和螺釘(英寸系列)
| Square and Hex Bolts and Screws (Inch Series)
|
| ANSI/ASME B18.2.1a-1999
| 四方和六角形螺栓和螺釘(英制系列)
| Square and Hex Bolts and Screws (Inch Series)
|
| ANSI/ASME B18.2.3.1M-1999
| 螺釘,米制六角型螺帽
| Screws, Metric Hex Cap
|
| ANSI/ASME B18.2.3.2M-2005
| 米制成形六角螺釘
| Metric Formed Hex Screws
|
| ANSI/ASME B18.2.3.3M-2007
| 米制重六角形螺釘
| Metric Heavy Hex Screws
|
| ANSI/ASME B18.2.3.4M-2001
| 米制六角頭法蘭螺釘
| Screws, Metric Hex Flange
|
| ANSI/ASME B18.2.3.9M-2001
| 米制大型六角頭帶法蘭螺釘
| Metric Heavy Hex Flange Screws
|
| ANSI/ASME B18.2.7.1M-2002
| 米制12-花鍵法蘭螺釘
| Metric 12-Spline Flange Screws
|
| ANSI/ASME B18.2.8-1999
| 螺栓、螺釘和螺柱的通孔
| Clearance Holes for Bolts, Screws and Studs
|
| ANSI/ASME B18.2.9-2007
| 螺栓和螺釘用平直度量規和精確計量
| Straightness Gage and Gaging for Bolts and Screws
|
| ANSI/ASME B18.3-2003
| 圓柱頭內六角有肩定位螺釘(英制系列)
| Socket Cap, Shoulder, and Set Screws (Inch Series)
|
| ANSI/ASME B18.3.1M-1986
| 米制系列內六角螺釘
| Screws, Socket Head Cap (Metric Series)
|
| ANSI/ASME B18.3.3M-1986
| 米制系列內六角軸肩螺釘
| Hexagon Socket Head Shoulder Screws (Metric Series)
|
| ANSI/ASME B18.3.4M-1986
| 米制系列內六角圓頭螺釘
| Screws, Hexagon Socket Button Head Cap (Metric Series)
|
| ANSI/ASME B18.3.5M-1986
| 米制系列六角扁平沉頭螺釘
| Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series)
|
| ANSI/ASME B18.3.6M-1986
| 米制系列六角凹頭制動螺釘
| Screws, Hexagon Socket Set (Metric Series)
|
| ANSI/ASME B18.6.1-1981
| 木螺絲(英寸系列)
| Wood Screws (Inch Series)
|
| ANSI/ASME B18.6.2-1998
| 開槽圓頭螺釘、方頭止動螺釘和開槽無頭止動螺釘
| Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws
|
| ANSI/ASME B18.6.3-2003
| 有槽和凹槽頭機器螺釘和機器螺母
| Slotted and Recessed Head Machine Screws and Machine Screw Nuts
|
| ANSI/ASME B18.6.4-2005
| 英制系列自攻螺釘和金屬釘狀螺絲的螺紋成型和切割
| Screws, Tapping and Metallic Drive, Inch Series, Thread Forming and Cutting
|
| ANSI/ASME B18.6.4-2005
| 英制系列自攻螺釘和金屬釘狀螺絲的螺紋成型和切割
| Screws, Tapping and Metallic Drive, Inch Series, Thread Forming and Cutting
|
| ANSI/ASME B18.6.5M-1999
| 公制螺紋成形和螺紋切削自攻螺釘
| Metric Thread Forming and Thread Cutting Tapping Screws
|
| ANSI/ASME B18.6.5Ma-2000
| 公制螺紋成形和螺紋切削自攻螺釘
| Metric Thread Forming and Thread Cutting Tapping Screws
|
| ANSI/ASME B18.6.7M-1999
| 米制機用螺釘
| Metric Machine Screws
|
| ANSI/SAE J1061-1992
| 普通螺栓、螺釘和雙頭螺栓的表面不均勻性
| Surface Discontinuities on General Application Bolts, Screws, and Studs
|
| ANSI/SAE J2295-1998
| 緊固件.零件標準帽螺釘、六角頭螺栓和六角螺母
| Fasteners - Part Standard Cap Screws, Hex Bolts, and Hex Nuts
|
| ANSI/SAE J370-1998
| 建筑和工業機械用螺栓和有頭螺釘尺寸
| Bolt and Capscrew Sizes for Use in Construction and Industrial Machinery
|
| ANSI/SAE J58-1998
| 凸緣12點螺釘
| Flanged 12-Point Screw
|
| ANSI/SAE J78-1998
| 鋼制自鉆孔自攻絲螺釘
| Steel Self-Drilling Tapping Screws
|
| ANSI/SAE J81-1997
| 螺紋滾軋螺釘
| Thread Rolling Screws
|
| ANSI/SAE J82-1998
| 機器螺釘?shù)臋C械和質量要求
| Mechanical and Quality Requirements for Machine Screws
|
| ANSI/SAE J933-1998
| 自攻螺釘?shù)臋C械和質量要求
| Mechanical and Quality Requirements for Tapping Screws
|
| ANSI/SCTE 29-2002
| 連接止動螺釘?shù)倪B接導線穿過的扭矩要求
| Torque Requirements for Bond Wire Penetration of Bonding Set Screw
|
| ANSI/SMPTE 220-1996
| 電影和電視設備.攝像機的安裝連接件.1/4英寸20螺紋和3/8英寸16螺紋三角架螺釘
| Motion-Picture and Television Equipment - Camera Mounting Connections - 1/4-inch, 20-Thread and 3/8-inch, 16-Thread Tripod Screws
|
| ASME B 18.2.1 Erratum-2003
| 方頭和六角頭螺栓和螺釘(英寸系列).對ASME B 18.2.1-1996的勘誤
| (Square and hex bolts and screws (Inch series); Erratum to ASME B18.2.1-1996)
|
| ASME B18.11-1961
| 小型螺釘
| (Miniature screws)
|
| ASME B18.13-1996
| 螺釘和洗衣機組件.臂板(英寸系列)
| (Screw and washer assemblies - Sems (Inch series))
|
| ASME B18.2.1-1996
| 英制方頭和六角頭螺栓和螺釘(英制系列)
| (Square and hex bolts and screws (Inch series))
|
| ASME B18.2.1a Addenda-1999
| 方頭和六角頭螺栓和螺釘(英制系列).附錄
| (Square and hex bolts and screws (inch series); Addenda)
|
| ASME B18.2.3.1M-1999
| 米制六角頭螺釘
| (Metric hex cap screws)
|
| ASME B18.2.3.2M Errata-1980
| 米制成型六角頭螺釘,正誤表
| (Metric formed hex screws; Errata)
|
| ASME B18.2.3.2M-1979
| 米制成型六角頭螺釘
| (Metric formed hex screws)
|
| ASME B18.2.3.3M Errata-1981
| 米制重型六角頭螺釘,正誤表
| (Metric heavy hex screws; Errata)
|
| ASME B18.2.3.3M-1979
| 米制重型六角頭螺釘
| (Metric heavy hex screws)
|
| ASME B18.2.3.4M-2001
| 米制六角頭法蘭螺釘
| (Metric hex flange screws)
|
| ASME B18.2.3.8M-1981
| 米制六角木螺釘
| (Metric hex lag screws)
|
| ASME B18.2.3.9M-2001
| 米制大型六角頭法蘭螺釘
| (Metric heavy hex flange screws)
|
| ASME B18.2.7.1M Erratum-2002
| 米制12鍵槽凸緣螺釘.勘誤
| (Metric 12-spline flange screws; Erratum)
|
| ASME B18.2.7.1M-2002
| 米制12鍵槽凸緣螺釘
| (Metric 12-spline flange screws)
|
| ASME B18.29.1 Errata-1995
| 英制螺旋線圈螺釘用螺紋墊片.空轉和螺釘鎖定.正誤表
| (Helical coil screw thread inserts - Free running and screw locking (Inchs series))
|
| ASME B18.29.1-1993
| 英制螺旋線圈螺釘用螺紋墊片.空轉和螺釘鎖定
| (Helical coil screw thread inserts - Free running and screw locking (Inchs series))
|
| ASME B18.3-1998
| 六角鍵和花鍵圓柱頭內六角有肩定位螺釘(英制系列)
| (Socket cap, shoulder, and set screws, hex and spline keys (Inch series))
|
| ASME B18.3.1M-1986
| 米制凹頭帶帽螺釘
| (Socket head cap screws (Metric series))
|
| ASME B18.3.3M-1986
| 米制六角凹頭有肩螺釘
| (Hexagon socket head shoulder screws (Metric series))
|
| ASME B18.3.4M-1986
| 米制內六角圓頭帶帽螺釘
| (Hexagon socket button head cap screws (Metric series))
|
| ASME B18.3.5M-1986
| 米制六角凹頭沉頭螺釘
| (Hexagon socket flat countersunk head cap screws (Metric series))
|
| ASME B18.3.6M-1986
| 米制凹頭定位螺釘
| (Metric series socket set screws)
|
| ASME B18.6.1-1981
| 英制木螺釘
| (Wood screws (Inch series))
|
| ASME B18.6.2-1998
| 開槽圓頭螺釘、方頭定位螺釘和開槽無頭定位螺釘(英制系列)
| (Slotted head cap screws, square head set screws, and slotted headless set screws (Inch series))
|
| ASME B18.6.5M-2000
| 米制螺紋形和螺紋自攻絲螺釘
| (Metric thread-forming and thread-cutting tapping screws)
|
| ASME B94.3-1965
| 車床和螺絲車床用指桿切刀
| (Straight cut-off blades for lathes and screw machines)
|
| ASTM A 449a-2007
| 通用最低拉伸強度為120/105/90ksi的熱處理鋼制六角頭螺釘、螺栓和螺柱用標準規范
| Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
|
| ASTM A 574-2004
| 合金鋼內六角螺釘標準規范
| Standard Specification for Alloy Steel Socket-Head Cap Screws
|
| ASTM A 574M-2004
| 合金鋼內六角螺釘(米制)標準規范
| Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
|
| ASTM A 66-2007
| 鋼螺絲釘?shù)臉藴室?guī)范
| Standard Specification for Steel Screw Spikes
|
| ASTM C 1002-2007
| 木銷或鋼銷上石膏板制品或金屬灰泥基板用自攻鋼螺釘?shù)臉藴室?guī)范
| Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
|
| ASTM C 1513-2004
| 冷成形鋼構架連接件用鋼自攻螺釘標準規范
| Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
|
| ASTM C 754-2004
| 用螺釘安裝石膏墻板的鋼框構件安裝的標準規范
| Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
|
| ASTM C 954-2007
| 將厚度為0.033英寸至0.112英寸(0.84mm至2.84mm)的石膏板制品或金屬灰泥基板安裝在鋼骨上所用的鉆孔鋼螺釘?shù)? | Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
|
| ASTM C 955-2006
| 螺釘安裝石膏板及金屬熟石膏基板用承重(橫向及軸向)鋼骨、導板、系桿或隔柵撐標準規范
| Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
|
| ASTM F 116-2000
| 醫療用螺絲刀標準規范
| Standard Specification for Medical Screwdriver Bits
|
| ASTM F 2281-2004
| 耐熱及高溫設備用不銹鋼和鎳合金螺栓、六角頭螺釘和螺柱的標準規范
| Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
|
| ASTM F 2328M-2007
| 淬火和回火的螺紋鋼螺栓、螺釘和螺柱的脫碳和滲碳性測定的標準試驗方法(米制)
| Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
|
| ASTM F 2329-2005
| 碳鋼和合金鋼螺栓、螺釘、墊圈、螺母和特殊螺紋緊固件用熱浸鍍鋅覆層的標準規范
| Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
|
| ASTM F 2403-2006
| 60 000 psi拉伸強力碳鋼英制系列機械螺釘?shù)臉藴室?guī)范
| Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
|
| ASTM F 2502-2005
| 內部安裝植入物用生物可吸收板和螺釘?shù)臉藴室?guī)范和試驗方法
| Standard Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants
|
| ASTM F 468-2006
| 一般用途有色金屬螺栓、六角頭螺釘及螺柱標準規范
| Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
|
| ASTM F 468M-2006
| 一般用途有色金屬螺栓、六角頭螺釘及螺柱標準規范(米制)
| Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
|
| ASTM F 543-2007
| 金屬醫療骨螺釘?shù)臉藴室?guī)范和試驗方法
| Standard Specification and Test Methods for Metallic Medical Bone Screws
|
| ASTM F 593-2002
| 不銹鋼螺栓,六角頭螺釘及螺柱標準規范
| Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
|
| ASTM F 738M-2002
| 不銹鋼米制螺栓、螺釘及螺柱(米制)的標準規范
| Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
|
| ASTM F 788/F 788M-2006
| 英制及米制系列的螺栓、螺釘及螺柱的表面不均勻性的標準規范
| Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
|
| ASTM F 835-2004
| 合金鋼凹半圓頭及平頂沉頭六角螺釘?shù)臉藴室?guī)范
| Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
|
| ASTM F 835M-2004
| 合金鋼凹半圓頭及平頂沉頭六角螺釘(米制)標準規范
| Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
|
| ASTM F 837a-2002
| 不銹鋼凹頭螺釘螺絲的標準規范
| Standard Specification for Stainless Steel Socket Head Cap Screws
|
| ASTM F 837a-2002
| 不銹鋼凹頭螺釘螺絲的標準規范
| Standard Specification for Stainless Steel Socket Head Cap Screws
|
| ASTM F 837Ma-2002
| 不銹鋼凹頭螺釘螺絲的標準規范(米制)
| Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
|
| ASTM F 837Ma-2002
| 不銹鋼凹頭螺釘螺絲的標準規范(米制)
| Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
|
| ASTM F 879a-2002
| 不銹鋼圓頭及扁平沉頭六角螺釘?shù)臉藴室?guī)范
| Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
|
| ASTM F 879Ma-2002
| 不銹鋼圓頭及扁平沉頭六角螺釘?shù)臉藴室?guī)范(米制)
| Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
|
| ASTM F 880-2002
| 不銹鋼凹頭定位螺釘標準規范
| Standard Specification for Stainless Steel Socket-Set Screws
|
| ASTM F 880M-2002
| 不銹鋼凹頭定位螺釘(米制)標準規范
| Standard Specification for Stainless Steel Socket Set Screws [Metric]
|
| ASTM F 912-2004
| 合金鋼凹頭定位螺釘?shù)臉藴室?guī)范
| Standard Specification for Alloy Steel Socket Set Screws
|
| ASTM F 912M-2004
| 合金鋼凹頭定位螺釘(米制)的標準規范
| Standard Specification for Alloy Steel Socket Set Screws [Metric]
|
| IEEE C 135.3-2001
| 架空線架設用鍍鋅鐵方頭螺釘
| (Zinc-coated ferrous lag screws for overhead line construction)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|