| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 1083-1965
| 精密六角螺拴、螺釘與螺母(B.S.W和B.S.F 螺紋)規范
| Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
|
| BS 1127-1-1990
| 螺絲板牙和螺母狀板牙.第1部分:手用和機用圓形螺絲板牙和手用板牙柄規范
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks
|
| BS 1127-2-1990
| 螺絲板牙和螺母狀板牙.手用和機用錐形管螺紋用圓形螺絲板牙規范;R系列
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for taper pipe threads; R Series
|
| BS 1127-3-1990
| 螺絲板牙和螺母狀板牙.手用和機器操作平行管螺紋用圓形螺絲板牙規范;G系列
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for parallel pipe threads; G series
|
| BS 1127-4-1990
| 螺絲板牙和螺母狀板牙.圓形螺絲板牙術語
| Screwing dies and dienuts - Terminology for circular screwing dies
|
| BS 1127-5-1990
| 螺絲板牙和螺母狀板牙.六角形螺母狀板牙尺寸規范
| Screwing dies and dienuts - Specification for dimensions of hexagon dienuts
|
| BS 1210-1963
| 木螺釘規范
| Specification for wood screws
|
| BS 1473-1972
| 一般工程用可鍛鋁和鋁合金規范.鉚釘、螺栓和螺釘坯料
| Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock
|
| BS 1768-1963
| 統一精密六角頭螺栓、螺釘和螺母(UNC與UNF螺紋)規范.標準系列
| Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads) - Normal series
|
| BS 1981-1991
| 統一機用螺釘與機用螺母規范
| Specification for unified machine screws and machine screw nuts
|
| BS 2470-1973
| 六角凹頭螺釘和套筒扳手規范.英制系列
| Specification for hexagon socket screws and wrench keys - Inch series
|
| BS 2559-1994
| 螺絲起子和螺絲起子附件規范
| Specification for screwdrivers and screwdriver accessories
|
| BS 2559-3-1973
| 螺釘旋具規范.第3部分:絕緣螺釘旋具
| Specification for screwdrivers - Insulated screwdrivers
|
| BS 2A 204, 2A 206 [...]-1963
| 航空用<1/4>英寸以下的機器螺釘和螺母(統一螺紋)規范
| Specifications for machine screws and nuts (Unified threads) below <1/4> inch for aeronautical purposes
|
| BS 2A 204, 2A 206, 2A 208 and A 217 to A 225-1963
| 航空用1/4英寸以下的設備螺釘和螺母(統一螺紋)規范
| Specifications for machine screws and nuts (Unified threads) below <1/4> inch for aeronautical purposes
|
| BS 2A 204-1963
| 航空用小于1/4英寸的機器螺釘和螺母(統一螺紋)規范
| Specifications for machine screws and nuts (Unified threads) below 1/4 inch for aeronautical purposes
|
| BS 2A 296-1995
| 米制螺栓和螺釘.形位公差
| Bolts and screws, metric - Tolerances of form and position
|
| BS 3531-23.2-1993
| 接骨用植入物.骨板.與4.5mm、4.2mm、4.0mm、3.9mm、3.5mm和2.9mm公稱尺寸螺釘一起使用的孔和槽的規范
| Implants for osteosynthesis - Bone plates - Specification for holes and slots for use with screws of 4,5 mm, 4,2 mm, 4,0 mm, 3,9 mm, 3,5 mm and 2,9 mm nominal sizes
|
| BS 3531-23.3-1991
| 骨接合術用外科植入物.第23部分:金屬接骨板.第3節:不對稱螺紋球形底面螺釘?shù)穆葆斂? | Implants for osteosynthesis - Bone plates - Specification for holes corresponding to screws with asymmetrical thread and spherical undersurfaces
|
| BS 3531-5.1-1997
| 骨接合術用外科植入物.第5部分:骨螺釘和輔助裝置.第1節:六角凹頭螺釘規范
| Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for keys for use with screws having heads with hexagon socket
|
| BS 3531-5.2-1990
| 骨接合術用外科植入物.第5部分:骨螺釘和輔助裝置.第2節:單槽頭和十字槽頭螺釘旋具規范
| Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for screwdrivers for screws having heads with single slot, cruciate slot or cross-recess
|
| BS 3531-5.3-1991
| 骨接合術用外科植入物.第5部分:不對稱螺紋六角頭球面頸金屬接骨螺釘.第3節:尺寸規范
| Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for the dimensions of screws having hexagonal drive connection, spherical under-surfaces and asymmetrical thread
|
| BS 3531-5.4-1993
| 接骨用植入物.接骨螺釘和輔助設備.有對稱和不對稱螺紋及圓錐形底面的螺釘規范
| Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for screws having symmetrical and asymmetrical thread and conical undersurfaces
|
| BS 3531-5.5-1990
| 骨接合術外科植入物.第5部分:骨螺釘和輔助裝置.第5節:絲錐和鉆頭規范
| Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for taps and drills
|
| BS 3531-5.6-1991
| 骨接合術用外科植入物.第5部分:不對稱螺紋和球形下表面金屬接骨螺釘.第6節:機械要求和試驗方法規范
| Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for the mechanical requirements and test methods for screws having asymmetrical thread and spherical undersurface
|
| BS 3692-2001
| ISO 米制精密六角螺拴、螺釘和螺母規范
| ISO metric precision hexagon bolts, screws and nuts - Specification
|
| BS 4168-7-1982
| 內六角螺釘和板手.米制系列.第7部分:內六角圓柱頭軸肩螺釘規范
| Hexagon socket screws and wrench keys: metric series - Specification for hexagon socket shoulder screws
|
| BS 4174-1972
| 自攻螺釘及金屬傳動螺釘規范
| Specification for self-tapping screws and metallic drive screws
|
| BS 4183-1967
| 機用螺釘和螺母規范.米制系列
| Specification for machine screws and machine screw nuts - Metric series
|
| BS 4185-1-1967
| 機床零件.第1部分:防松螺母("c"型,凹頭緊固螺釘鎖緊)
| Machine tool components - Locknuts ('C' type, socket set screw locking)
|
| BS 4185-9-1976
| 機床零件.第9部分:整平螺釘、螺母及基座板
| Specification - Machine tool components - Levelling screws, nuts and seating plates
|
| BS 4190-2001
| ISO 米制的粗制六角螺拴、螺釘和螺母規范
| ISO metric black hexagon bolts, screws and nuts - Specification
|
| BS 4429-1987
| 一般工程、起重和吊管器用菘緊螺釘和螺旋扣規范
| Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications
|
| BS 450-1958
| 機用螺釘與機用螺母(B.S.W和 B.S.F螺紋)規范
| Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
|
| BS 4933-1973
| ISO 米制粗制帽罩頭和沉頭螺拴、螺釘和六角螺母規范
| Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
|
| BS 6040-1981
| 螺栓、螺釘、螺母和附件的名命
| Nomenclature for bolts, screws, nuts and accessories
|
| BS 6416-1983
| 螺釘與螺母裝配工具術語
| Nomenclature for assembly tools for screws and nuts
|
| BS 6487-1984
| 螺拴、螺釘和雙頭螺栓的開口銷孔與保險孔規范
| Specification for split pin holes and wire holes in bolts, screws and studs
|
| BS 6528-1984
| 圓柱螺釘螺紋的術語詞匯
| Glossary of terms for cylindrical screw threads
|
| BS 6605-1990
| 十字槽螺釘規范
| Specification for cross recesses for screws
|
| BS 7345-1990
| 螺栓、螺釘和螺柱標稱長度和通用螺栓螺紋長度規范
| Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts
|
| BS 7364-1990
| 采用螺釘固定石膏墻板的立筋隔段和隔板以及襯里用鍍鋅鋼螺柱和鋼槽規范
| Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards
|
| BS 7433-1-1991
| 十字槽螺釘.第1部分:A級產品的盤砂螺釘規范
| Cross recessed machine screws - Specification for pan head screws of product grade A
|
| BS 7433-2-1991
| 十字槽螺釘.第2部分:4.8特性等級和A級產品的沉頭螺釘
| Cross recessed machine screws - Specification for countersunk flat head screws product grade A and property class 4.8 only
|
| BS 7433-3-1991
| 十字槽螺釘.第3部分:A級產品的半沉頭螺釘規范
| Cross recessed machine screws - Specification for raised countersunk head screws product grade A
|
| BS 7504-1995
| 液壓流體動力.在壓力25 MPa 和40 MPa(250 巴 和400 巴)條件下使用的四螺釘、單片正方形法蘭連接器
| Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
|
| BS 7599-1992
| 六角墊圈頭自攻螺釘規范
| Specification for hexagon washer head tapping screws
|
| BS 7600-1992
| 六角法蘭頭自攻螺釘規范
| Specification for hexagon flange head tapping screws
|
| BS 768-1958
| 開槽平頭螺釘規范
| Specification for slotted grub screws
|
| BS 7715-1994
| 具有非金屬常用扭矩元件螺紋的流行式扭矩型螺栓、螺釘及螺柱規范
| Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
|
| BS 7795-1995
| 預加微囊包封化學粘合件內裝螺紋的螺栓、螺釘和螺柱規范
| Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
|
| BS 7814-1995
| 裝有既可以頭下鎖緊又可以防止?jié)L動功能的螺栓和螺釘規范
| Specification for bolts and screws incorporating either underhead locking or anti-rotation features
|
| BS 7842-1996
| 具有預作用的螺紋密封特性的安裝在螺紋上的螺栓、螺釘和螺柱
| Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
|
| BS A 260, A 261 [...]-1976
| 米制螺釘規范
| Specification for metric screws
|
| BS A 260, A 261, A 262, A 263, A 264, A 265-1976
| 米制螺釘規范
| Specification for metric screws
|
| BS A 260-1976
| 公制螺釘規范
| Specification for metric screws
|
| BS A 287, A 288 [...]-1982
| 內六角螺釘規范.米制系列
| Specification for hexagon socket head cap screws - Metric series
|
| BS A 287, A 288, A 289, A 290, A 291, A 292-1982
| 六角凹頭螺釘規范.公制系列
| Specification for hexagon socket head cap screws - Metric series
|
| BS A 287-1982
| 內六角有頭螺釘規范.公制系列
| Specification for hexagon socket head cap screws - Metric series
|
| BS A 31-54-1951
| 航空用英國協會低抗拉強度螺釘和螺母規范
| Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
|
| BS A 311-1997
| 航空航天.強度級小于或等于1100 MPa的涂層或未涂層金屬材料標稱桿短長度或中等長度MJ螺紋的內部偏移十字形
| Aerospace - Screws, 100 ° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 312-1997
| 強度級小于或等于1100MPa的涂層或未涂層金屬材料制階梯形桿、短長度或中等長度MJ螺紋的內偏移十字形肋狀或
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 313-1997
| 航空航天.強度級小于或等于1100MPa的涂層或未涂層金屬材料制節徑桿長長度MJ螺紋的內偏移十字形肋狀或非肋狀
| Areospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 322-1998
| 內分支凸型或非凸型驅動的金屬材料涂層或未土層的強度級低于或等于1100Mpa的平頭帶螺紋螺釘.尺寸
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 55 and 56-1951
| 航空用平頭螺釘規范
| Specifications for grub screws for aeronautical purposes
|
| BS DD IEC/PAS 61169-4-2006
| 射頻連接器.分規范.具有螺釘鎖定的外部導體內徑為16mm(0.63in)的射頻同軸連接器.特性阻抗為50Ω(7-16型)
| Radio-frequency connectors - Sectional specification - Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 $2I (type 7-16)
|
| BS EN 14512-2006
| 危險貨物運輸用容器.液態化學藥品運輸用罐設備.帶繞軸旋轉螺釘?shù)你q鏈人孔蓋和頸環
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole cover and neckrings with pivoting bolts
|
| BS EN 175301-803-2006
| 詳細規范.矩形連接器.帶不可拆卸鎖緊螺釘?shù)?.8mm厚平面連接器
| Detail specification: rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable
|
| BS EN 20273-1992
| 緊固件.螺栓和螺釘自由尺寸孔
| Fasteners - Clearance holes for bolts and screws
|
| BS EN 20898-7-1995
| 緊固件機械性能.標稱直徑為1MM到10MM的螺栓和螺釘?shù)呐まD(zhuǎn)試驗和最小扭矩
| Mechanical properties of fasteners - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
|
| BS EN 2363-1989
| 操縱鋼索的松緊螺絲扣的鎖緊卡子的規范.尺寸
| Specification for locking clips for turnbuckles of control cables - Dimensions
|
| BS EN 24766-1992
| 一字槽平端緊定螺釘
| Slotted set screws with flat point
|
| BS EN 26157-1-1992
| 緊固件的表面不均勻性.第1部分:一般要求的螺栓、螺釘和螺柱
| Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements
|
| BS EN 26157-3-1992
| 緊固件的表面不均勻性.第3部分:有特殊要求的螺栓、螺釘和螺柱
| Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements
|
| BS EN 2649-1995
| 鍍鎘合金鋼螺紋至螺釘頭的帶槽盤頭螺釘.等級:900MPa(室溫)/235℃
| Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 °C
|
| BS EN 2650-1997
| 頭部加螺紋的鈍化耐蝕鋼制盤形頭有槽螺釘.等級:600MPa(室溫)/425℃
| Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) /425 °C
|
| BS EN 2651-1997
| 鍍錫的黃銅制的螺紋至螺釘頭部的開槽盤頭螺釘.等級:380MPa(室溫)/80℃
| Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C
|
| BS EN 2652-1997
| 鍍鎘合金鋼制頭部加螺紋的100°標準埋頭開槽螺釘.等級:900MPa(室溫)/235℃
| Screws, 100 ° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
|
| BS EN 2653-1997
| 鈍化處理的耐蝕鋼螺紋至螺釘頭部的帶槽100°標準埋頭螺釘.等級:600MPa(室溫)/425℃
| Screws, 100 ° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) /425 °C
|
| BS EN 2654-1997
| 鍍錫的黃銅制的螺紋至螺釘頭部的開槽100°標準埋頭螺釘.等級:380MPa(室溫)/80℃
| Screws, 100 ° countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C
|
| BS EN 27434-1992
| 一字槽錐端緊定螺釘
| Slotted set screws with cone point
|
| BS EN 27435-1992
| 一字槽長圓柱端緊定螺釘
| Slotted set screws with long dog point
|
| BS EN 27436-1992
| 一字槽凹端緊定螺釘
| Slotted set screws with cup point
|
| BS EN 27721-1992
| 沉頭螺釘?shù)念^形和測量
| Countersunk head screws - Head configuration and gauging
|
| BS EN 28839-1992
| 緊固件機械性能.有色金屬制螺栓、螺釘、螺柱和螺母
| Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals
|
| BS EN 2884-1996
| 二硫化鉬潤滑的陽極化鈦合金短螺紋大公差標準螺桿斜十字槽盤頭螺釘.等級:1100MPa(室溫)/315℃
| Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
|
| BS EN 2885-1996
| 鍍鎘合金鋼制短螺紋大公差標準螺桿斜十字槽盤頭螺釘.等級:900MPa(室溫)/235℃
| Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
|
| BS EN 2886-1996
| 鍍鎘的合金鋼制短螺紋緊公差標準螺桿斜十字槽盤頭螺釘.等級:900MPa(室溫)/235℃
| Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 °C
|
| BS EN 2897-1996
| 鍍鎘的合金鋼短螺紋緊公差標準螺桿斜十字槽盤頭螺釘.等級:1100MPa(室溫)/235℃
| Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) /235 °C
|
| BS EN 2937-1994
| FE-PA92HT(A286)耐高溫鋼制頭部加螺紋六角頭螺釘分類:900 MPa(周圍環境溫度)/650℃
| Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification: 900 MPa (at ambient temperature)/650 °C
|
| BS EN 2938-1996
| 鍍銀的FE-PA92HT(A286)耐熱鋼螺紋至螺釘頭部的六角頭螺釘.等級:900 MPa(室溫)/650℃
| Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
|
| BS EN 2939-1994
| FE-PA92HT(A 286)耐高溫鋼螺紋至釘頭部的斜十字槽100°埋頭螺釘.等級:900MPa(室溫)/650℃
| Screws, 100 ° countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C
|
| BS EN 2940-1996
| 鍍銀的FE-PA92HT(A286)耐熱鋼螺紋至螺釘頭部的斜十字槽100°埋頭螺釘.等級:900MPa(室溫)/650℃
| Screws, 100 ° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 900MPa (at ambient temperature)/650 °C
|
| BS EN 3035-1997
| 鍍鎘的合金鋼短螺紋緊公差標準螺桿斜十字槽100°標準埋頭螺釘.等級:1100 MPa(室溫)/235℃
| Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
|
| BS EN 3037-1997
| 二硫化鉬潤滑的陽極化的鈦合金短螺紋緊公差標準螺桿斜十字槽盤頭螺釘.等級:1100 MPa(室溫)/315℃
| Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
|
| BS EN 3038-1997
| 鈍化處理的耐熱耐蝕鋼短螺紋緊公差標準螺桿斜十字槽盤頭螺釘.等級:1100 MPa(室溫)/425℃
| Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 320-1993
| 纖維板.抗螺釘軸向拔出力的測定
| Fibreboards - Determination of resistance to axial withdrawal of screws
|
| BS EN 3202-1995
| T形頭螺釘?shù)陌惭b孔和接觸凹面.設計標準
| Holes and traps for T-head bolts - Design standard
|
| BS EN 3303-1997
| 鍍鎘合金鋼制中長螺紋粗公差標準柄六角凹帽罩頭螺釘.等級:1100 MPa(室溫)/235℃
| Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
|
| BS EN 3304-1997
| 二硫化鉬潤滑的陽極化的鈦合金短螺紋緊公差標準螺桿斜十字槽100°小埋頭螺釘.等級:1100 MPa(室溫)/315℃
| Screws, 100 ° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
|
| BS EN 3305-1997
| 鍍鎘的合金鋼短螺紋緊公差標準螺桿斜十字槽100°小埋頭螺釘.等級:1100 MPa(室溫)/235℃
| Screws, 100 ° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
|
| BS EN 3306-1996
| 二硫化鉬潤滑的陽極化的鈦合金螺紋至螺釘頭部的斜十字槽100°標準埋頭螺釘.等級:1100 MPa(室溫)/315℃
| Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification - 1100 MPa (at ambient temperature)/315 °C
|
| BS EN 3307-1997
| 二硫化鉬潤滑的陽極化的鈦合金螺紋至螺釘頭部的斜十字槽盤頭螺釘.等級:1100 MPa(室溫)/315℃
| Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
|
| BS EN 3308-1996
| 二硫化鉬潤滑的陽極化的鈦合金螺紋至螺釘頭部的標準六角頭螺釘.等級:1100 MPa(室溫)/315℃
| Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification - 1100 MPa (at ambient temperature) /315 °C
|
| BS EN 3381-1997
| 二硫化鉬潤滑的陽極的的化鈦金屬短螺紋緊公差標準螺桿斜十字槽100°標準埋頭螺釘.等級:1100 MPa(室溫)/315
| Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) /315 °C
|
| BS EN 3543-1997
| 鈍化耐熱及耐腐蝕鋼制短螺紋緊公差標準柄翼型十字槽100°標準埋頭螺釘.等級:1100 MPa(室溫)/425℃
| Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3725-2005
| 航空航天系列.陽極氧化、MoS2涂覆的鈦合金TI-P64001制長螺紋、標準桿、六瓣凹槽盤頭螺釘.強度等級:1100MPa(
| Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class: 1100 MPa (at ambient temperature)
|
| BS EN 3759-1997
| 鈍化處理的耐熱耐腐蝕鋼螺紋至螺釘頭部的斜十字槽盤頭螺釘.等級:1100 MPa(室溫)/425℃
| Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3760-1997
| 鈍化處理的耐熱耐腐蝕鋼螺紋至螺釘頭部的斜十字槽100°標準埋頭螺釘.等級:1100 MPa(室溫)/425℃
| Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 4303-2005
| 航空航天系列.帶鈍化(壁厚為0.25mm)耐腐蝕鋼制埋頭拉伸螺釘用管形套管
| Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
|
| BS EN 4304-2005
| 鈍化耐腐蝕鋼制埋頭剪切螺釘用套管(0.25毫米壁厚)
| Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
|
| BS EN 4306-2005
| 鈍化耐腐蝕鋼制埋頭張力螺釘用套管(0.50毫米壁厚)
| Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
|
| BS EN 4307-2005
| 鈍化耐腐蝕鋼制埋頭剪切螺釘用套管(0.50毫米壁厚)
| Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
|
| BS EN 4323-2004
| 航空航天系列.鈦合金TI-P64001制的六瓣凹槽、全桿螺紋、陽極氧化、鍍MoS2的100 沉頭螺釘.分類.900MPa(室溫
| Aerospace series - Screws, 100 ° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated - Classification - 900 MPa (at ambient temperature) / 350 °C
|
| BS EN 4496-2005
| 航空航天系列.有色鋁涂層、陽極化的、鈦合金、短螺紋、緊公差標稱桿、偏位十字凹槽沉頭標稱100 °螺釘.等級
| Aerospace series - Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
|
| BS EN 4497-2005
| 航空航天系列.有色鋁涂層、陽極化的、鈦合金、短螺紋、緊公差標稱桿、偏位十字凹槽盤頭螺釘.等級:1100MPa(
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
|
| BS EN 4509-2006
| 航空航天系列.帶鍍鋁涂層陽極氧化的鈦合金螺紋延伸到螺頭100°沉頭偏置十字凹槽螺釘、米制系列.等級:1100MP
| Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| BS EN ISO 10510-2000
| 帶普通墊圈的自攻螺釘和墊圈組件
| Tapping screw and washer assemblies with plain washers
|
| BS EN ISO 10642-2004
| 六角內孔沉頭螺釘
| Hexagon socket countersunk head screws
|
| BS EN ISO 10644-1998
| 帶平墊圈的螺釘和墊圈組件.墊圈硬度級別為200HV和300HV
| Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV
|
| BS EN ISO 10664-2005
| 螺栓和螺釘用內板擰的六角花形
| Hexalobular internal driving feature for bolts and screws
|
| BS EN ISO 10666-1999
| 自鉆自攻螺釘.機械和功能特性
| Drilling screws with tapping screw threads - Mechanical and functional properties
|
| BS EN ISO 10669-1999
| 自攻螺釘用平墊圈和墊圈組件.常規和大型系列.A級產品
| Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A
|
| BS EN ISO 10673-1999
| 螺釘用平墊圈和墊圈組件.小型、標準型和大型系列、A級產品
| Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A
|
| BS EN ISO 11381-1995
| 光學和光學儀器.眼科光學.螺釘螺紋
| Optics and optical instruments - Ophthalmic optics - Screw threads
|
| BS EN ISO 1207-1993
| 開槽圓柱頭螺釘.產品等級A級
| Slotted cheese head screws - Product grade A
|
| BS EN ISO 14579-2001
| 圓柱頭內六角螺釘
| Hexalobular socket head cap screws
|
| BS EN ISO 14580-2001
| 扁圓頭內六角螺釘
| Hexalobular socket cheese head screws
|
| BS EN ISO 14583-2001
| 盤頭內六角螺釘
| Hexalobular socket pan head screws
|
| BS EN ISO 14584-2001
| 半埋頭內六角螺釘
| Hexalobular socket raised countersunk head screws
|
| BS EN ISO 14585-2001
| 盤頭內六角攻絲螺釘
| Hexalobular socket pan head tapping screws
|
| BS EN ISO 14586-2001
| 埋頭內六角攻絲螺釘
| Hexalobular socket countersunk head tapping screws
|
| BS EN ISO 14587-2001
| 半埋頭(橢圓形)內六角攻絲螺釘
| Hexalobular socket raised countersunk (oval) head tapping screws
|
| BS EN ISO 1479-1995
| 六角頭自攻螺釘規范
| Specification for hexagon-head tapping screws
|
| BS EN ISO 1481-1995
| 開槽平頭絲錐螺釘規范
| Specification for slotted pan-head tapping screws
|
| BS EN ISO 1482-1995
| 開槽埋頭(扁平型)絲錐螺釘規范(普通型)
| Specification for slotted countersunk (flat) head tapping screws (common head style)
|
| BS EN ISO 1483-1995
| 開槽埋頭(橢圓型)絲錐螺釘(普通型)
| Slotted raised countersunk (oval) head tapping screws (common head style)
|
| BS EN ISO 15065-2005
| 頭部外形符合ISO 7721標準的沉頭螺釘?shù)穆耦^孔
| Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
|
| BS EN ISO 15480-1999
| 帶攻絲螺紋的六角頭墊圈自攻螺釘
| Hexagon washer head drilling screws with tapping screw thread
|
| BS EN ISO 15481-1999
| 帶攻絲螺紋的十字凹槽平頭自攻螺釘
| Cross recessed pan head drilling screws with tapping screw thread
|
| BS EN ISO 15482-1999
| 帶攻絲螺紋的十字凹槽埋頭自攻螺釘
| Cross recessed countersunk head drilling screws with tapping screw thread
|
| BS EN ISO 15483-1999
| 帶攻絲螺紋的十字凹槽半埋頭自攻螺釘
| Cross recessed raised countersunk head drilling screws with tapping screw thread
|
| BS EN ISO 1580-1994
| 開槽平頭螺釘.A級產品
| Slotted pan head screws - Product grade A
|
| BS EN ISO 2009-1995
| 開槽沉頭螺釘(普通型).A級產品
| Slotted countersunk flat head screws (common head style) - Product grade A
|
| BS EN ISO 2010-1995
| 埋頭開槽沉頭螺釘(普通型).A級產品
| Countersunk slotted raised head screws (common head style) - Product grade A
|
| BS EN ISO 2342-2004
| 有釘體的開槽無頭螺釘
| Slotted headless screws with shank
|
| BS EN ISO 2702-1992
| 熱處理鋼自攻螺釘?shù)臋C(jī)械性能
| Heat-treated steel tapping screws - Mechanical properties
|
| BS EN ISO 3506-1-1998
| 耐腐蝕不銹鋼緊固件的機械特性.螺栓、螺釘和螺柱
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs
|
| BS EN ISO 3506-3-1998
| 耐腐蝕不銹鋼緊固件的機械特性.不受拉伸應力作用的定位螺絲和同類緊固件
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Set screws and similar fasteners not under tensile stress
|
| BS EN ISO 3506-4-2003
| 耐腐蝕不銹鋼緊固件的機械特性.攻絲螺釘
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Tapping screws
|
| BS EN ISO 4017-2001
| 六角頭螺釘.產品等級A和B級
| Hexagon head screws - Product grades A and B
|
| BS EN ISO 4018-2001
| 六角頭螺釘.產品等級C級
| Hexagon head screws - Product grade C
|
| BS EN ISO 4026-2003
| 內六角平端緊定螺釘
| Hexagon socket set screws with flat point
|
| BS EN ISO 4027-2003
| 內六角錐端緊定螺釘
| Hexagon socket set screws with cone point
|
| BS EN ISO 4028-2003
| 內六角圓柱端緊定螺釘
| Hexagon socket set screws with dog point
|
| BS EN ISO 4029-2003
| 內六角凹端緊定螺釘
| Hexagon socket set screws with cup point
|
| BS EN ISO 4757-1995
| 螺釘十字槽
| Cross recesses for screws
|
| BS EN ISO 4759-1-2001
| 緊固件公差.螺栓、螺釘、螺柱和螺母.產品等級A、B和C級
| Tolerances for fasteners - Bolts, screws, studs and nuts - Product grades A, B and C
|
| BS EN ISO 4759-3-2000
| 緊固件公差.螺栓、螺釘和螺母用平墊圈.產品等級A和C
| Tolerances for fasteners - Plain washers for bolts, screws and nuts - Product grades A and C
|
| BS EN ISO 4762-2004
| 內六角圓柱頭螺釘
| Hexagon socket head cap screws
|
| BS EN ISO 6410-1-1996
| 技術制圖.螺釘和螺紋零件.第1部分:通用慣例
| Technical drawings - Screw threads and threaded parts - General conventions
|
| BS EN ISO 6410-3-1996
| 技術制圖.螺釘和螺紋零件.第3部分:簡化表示
| Technical drawings - Screw threads and threaded parts - Simplified representation
|
| BS EN ISO 6789-2003
| 螺釘和螺母用裝配工具.手動扭具.設計合格檢驗、質量合格檢驗和再校準程序的要求和試驗方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
|
| BS EN ISO 7045-1995
| H型或Z型十字槽平頭螺釘.A級產品
| Pan head screws with type H or type Z cross recess - Product grade A
|
| BS EN ISO 7046-1-1994
| H型或Z型十字槽沉頭螺釘(圓頭型).A級產品.4.8級性能鋼
| Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A. Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A. Steel property class 4.8
|
| BS EN ISO 7046-2-1995
| H型或Z型十字槽沉頭螺釘.A級產品.8.8級,不銹鋼和非鐵類金屬鋼特性
| Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A. Steel of property class 8.8, stainless steel and non-ferrous metals
|
| BS EN ISO 7047-1995
| H型或Z型十字槽埋頭螺釘(普通型).A級產品
| Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A
|
| BS EN ISO 7048-1999
| 十字槽圓頭螺釘
| Cross recessed cheese head screws
|
| BS EN ISO 7049-1995
| 十字槽盤頭自攻螺釘
| Cross recessed pan head tapping screws
|
| BS EN ISO 7050-1995
| 十字槽埋頭(平頭)自攻螺釘（通用頭型）規范
| Specification for cross-recessed countersunk (flat) head tapping screws (common head style)
|
| BS EN ISO 7051-1995
| 十字槽高埋頭（橢圓形）自攻螺釘規范
| Specification for cross-recessed raised countersunk (oval) head tapping screws
|
| BS EN ISO 7085-1999
| 表面淬火和回火的公制螺紋滾壓螺釘?shù)臋C(jī)械和性能要求
| Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
|
| BS EN ISO 7380-2004
| 內六角平圓頭螺釘
| Hexagon socket button head screws
|
| BS EN ISO 7721-2-1995
| 沉頭螺釘.十字槽深度
| Countersunk flat head screws - Penetration depth of cross recesses
|
| BS EN ISO 8676-2001
| 米制細牙螺紋六角頭螺釘.產品等級A和B級
| Hexagon head screws with metric fine pitch thread - Product grades A and B
|
| BS EN ISO 887-2000
| 通用米制螺栓、螺釘和螺母用平墊圈.總方案
| Plain washers for metric bolts, screws and nuts for general purposes - General plan
|
| BS EN ISO 898-1-1999
| 碳鋼和合金鋼制的緊固件的機械特性.螺栓、螺釘和螺柱
| Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs
|
| BS EN ISO 898-5-1999
| 碳鋼及合金鋼制緊固件的機械性能.無拉伸應力下的定位螺釘和類似的螺紋緊固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stresses
|
| BS G 203-1967
| 帶強制貼合和鎖緊墊圈的統一螺釘規范
| Specification for Unified screws with captive facing and locking washers
|
| BS HR 650-1972
| 制造螺栓、螺柱、定位螺釘和螺母用耐熱高膨脹鋼棒材和線材(Ni25.5、Cr15、Ti2、Mn1.5、Mo1.25、Si0.7、V0.3
| Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm)
|
| BS ISO 10045-1993
| 高山雪橇.緊固繃帶安裝部位.試驗螺釘要求
| Alpine skis - Binding mounting area - Requirements for test screws
|
| BS ISO 10102-2001
| 螺釘和螺母用裝配工具.工程用雙頭呆扳手.扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10103-2001
| 螺釘和螺母用裝配工具.雙頭直頸和彎頸套筒扳手.扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10104-2001
| 螺釘和螺母用裝配工具.雙頭高頸和矮頸套筒扳手.扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10228-1993
| 越野雪橇.緊固繃帶安裝部位.試驗螺釘要求
| Cross-country skis - Binding mounting area - Requirements for test screws
|
| BS ISO 1085-2000
| 螺釘和螺母用裝配工具.雙頭扳手.尺寸配對
| Assembly tools for screws and nuts - Double-ended wrenches - Size pairing
|
| BS ISO 10914-1998
| 螺釘和螺母用安裝工具.開鍵槽用套管扳手
| Assembly tools for screws and nuts - Sockets and wrenches for spline drive
|
| BS ISO 1173-2001
| 螺釘和螺母用裝配工具.機動和手動旋具類的驅動端和連接部件.尺寸和扭矩試驗
| Assembly tools for screws and nuts - Drive ends for hand and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing
|
| BS ISO 2351-1-2007
| 螺釘和螺母用裝配工具.機器驅動旋具頭.一字槽頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for slotted head screws
|
| BS ISO 2351-2-2002
| 螺釘和螺母的裝配工具.機器控制的改錐.十字槽凹頭螺釘用改錐
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for cross-recessed head screws
|
| BS ISO 2351-3-2002
| 螺釘和螺母用裝配工具.機器控制的改錐.六角內孔螺絲用改錐
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for hexagon socket screws
|
| BS ISO 2351-3-2002
| 螺釘和螺母用裝配工具.機器控制的改錐.六角內孔螺絲用改錐
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for hexagon socket screws
|
| BS ISO 262-1999
| ISO普通米制螺紋.螺釘,螺栓和螺母的選用尺寸
| ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
|
| BS ISO 2725-3-2001
| 螺釘和螺母用裝配工具.方形傳動套筒.機用套筒(無沖擊).尺寸
| Assembly tools for screws and nuts - Square drive sockets - Machine-operated sockets ("non-impact") - Dimensions
|
| BS ISO 5414-1-2002
| 扁方筒形柄刀具用的帶卡箍螺釘?shù)牡毒呖ūP(立銑刀刀具卡盤架).第1部分:刀柄傳動系統的尺寸
| Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Dimensions of the driving system of tool shanks
|
| BS ISO 5414-2-2002
| 扁方筒形柄刀具用的帶卡箍螺釘?shù)牡毒呖ūP(立銑刀刀具卡盤架).第2部分:夾頭的連接尺寸和命名
| Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Connecting dimensions of chucks and designation
|
| BS ISO 6162-1-2002
| 液壓傳動.帶對開夾或整體式法蘭夾的法蘭接頭以及公制或英制螺釘.在壓力為3,5MPa(35bar)至35MPa(350bar),DN1
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
|
| BS ISO 6162-2-2002
| 液壓傳動.帶對開夾或整體式法蘭夾的法蘭接頭以及公制或英制螺釘.在壓力為35MPa(350bar)至40MPa(400bar),DN1
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
|
| BS ISO 6787-2001
| 螺釘和螺母用裝配工具.可調扳手
| Assembly tools for screws and nuts - Adjustable wrenches
|
| BS ISO 7738-2001
| 螺釘和螺母用組合工具.組合扳手.扳手長度和頭部最大厚度
| Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
|
| BS ISO 885-2000
| 一般用途螺栓和螺釘.米制系列.頭下圓角半徑
| General purpose bolts and screws - Metric series - Radii under the head
|
| BS ISO 8992-2005
| 緊固件.螺栓、螺釘、螺柱和螺母通用要求
| Fasteners - General requirements for bolts, screws, studs and nuts
|
| BS QC 222000-1996
| 射頻連接器.螺釘連接的外層導體的內徑為6.5mm(0.256in)的射頻同軸連接器.,特性阻抗為50Ω(TNC型)
| Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling - Characteristic impedance 50 ohms - (Type TNC)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|