| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC/PAS 61169-4-2006
| 無線電頻率連接器.第4部分:分規范.具有螺釘鎖定的外部導體內徑為16mm(0.63in)的射頻同軸連接器.特性阻抗為5
| Radio-frequency connectors - Part 4: Sectional specification - Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 (type 7-16)
|
| ISO 10045-1991
| 高山雪橇 捆綁安裝區 試驗螺釘?shù)囊? | Alpine skis; binding mounting area; requirements for test screws
|
| ISO 10102-2001
| 螺釘和螺母用裝配工具 雙頭呆扳手 扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads
|
| ISO 10103-2001
| 螺釘和螺母用裝配工具 雙頭直頸和彎頸梅花扳手 扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads
|
| ISO 10104-2001
| 螺釘和螺母用裝配工具 雙頭高頸和矮頸梅花扳手 扳手長度和頭部厚度
| Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads
|
| ISO 10228-1991
| 越野雪橇 捆綁安裝區 試驗螺釘?shù)囊? | Cross-country skis; binding mounting area; requirements for test screws
|
| ISO 10509-1992
| 六角法蘭面自攻螺釘
| Hexagon flange head tapping screws
|
| ISO 10510-1999
| 自攻螺釘和平墊圈組合件
| Tapping screw and washer assemblies with plain washers
|
| ISO 10642-2004
| 內六角孔沉頭螺釘
| Hexagon socket countersunk head screws
|
| ISO 10644-1998
| 螺釘和平墊圈組合件 墊圈硬度等級200HV和300HV
| Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV
|
| ISO 10664-2005
| 螺栓和螺釘用內板擰的六角花形
| Hexalobular internal driving feature for bolts and screws
|
| ISO 10666-1999
| 自鉆自攻螺釘 機械和功能性能
| Drilling screws with tapping screw thread - Mechanical and functional properties
|
| ISO 10669-1999
| 自攻螺釘和墊圈組合件用平墊圈 標準和大系列 產品等級A級
| Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A
|
| ISO 10673-1998
| 螺釘和墊圈組合件用平墊圈 小、標準和大系列 產品等級A級
| Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A
|
| ISO 1085-1999
| 螺釘和螺母用裝配工具 雙頭扳手 對邊尺寸組配
| Assembly tools for screws and nuts - Double-ended wrenches - Size pairing
|
| ISO 10914-1996
| 螺釘和螺母用裝配工具 花鍵傳動套筒扳手
| Assembly tools for screws and nuts - Sockets and wrenches for spline drive
|
| ISO 1173-2001
| 螺釘和螺母用裝配工具 手動和機動旋轉頭的傳動端及連接部件 尺寸，轉矩試驗
| Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing
|
| ISO 1174-1-1996
| 螺釘和螺母用裝配工具 傳動方頭 第1部分:手動套筒板手的傳動方頭
| Assembly tools for screws and nuts - Driving squares - Part 1: Driving squares for hand socket tools
|
| ISO 1174-2-1996
| 螺釘和螺母用裝配工具 傳動方頭 第2部分:機動套筒扳手工具的傳動方頭
| Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools
|
| ISO 1207-1992
| 開槽圓柱頭螺釘 產品等級A級
| Slotted cheese head screws; product grade A
|
| ISO 12260-1996
| 航空航天 強度等級小于或等于1100MPa、金屬材料制成、有涂覆或未涂覆、短的或中等長度MJ螺紋,階梯桿型、內
| Aerospace - Screws, pan head, internal offset cruciform ribbed or unripped drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| ISO 12261-1996
| 航空航天 強度等級小于或等于1100MPa、金屬材料制成、有涂覆或未涂覆、長長度MJ螺紋、中徑桿型、內偏高扭矩
| Aerospace - Screws, pan head, internal offset cruciform ribbed or unripped drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| ISO 13921-1996
| 航空航天.金屬材料制涂覆或未涂覆的、強度等級小于或等于1100 MPa、具有大徑桿型、短的和中等長度MJ螺紋、
| Aerospace - Screws, 100° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| ISO 14579-2001
| 內六角頭螺釘
| Hexalobular socket head cap screws
|
| ISO 14580 Technical Corrigendum 1-2004
| 內六角圓頭螺釘.技術勘誤1
| Hexalobular socket cheese head screws; Technical Corrigendum 1
|
| ISO 14580-2001
| 內六角圓頭螺釘
| Hexalobular socket cheese head screws
|
| ISO 14583 Technical Corrigendum 1-2004
| 內六角盤頭螺釘.技術勘誤1
| Hexalobular socket pan head screws; Technical Corrigendum 1 |
| ISO 14583-2001
| 內六角大柱頭螺釘
| Hexalobular socket pan head screws
|
| ISO 14584-2001
| 內六角半沉頭螺釘
| Hexalobular socket raised countersunk head screws
|
| ISO 14585 Technical Corrigendum 1-2004
| 六角內孔平頭攻絲螺釘;技術勘誤1
| Hexalobular socket pan head tapping screws; Technical Corrigendum 1
|
| ISO 14585-2001
| 內六角大柱頭自攻螺釘
| Hexalobular socket pan head tapping screws
|
| ISO 14586-2001
| 內六角沉頭自攻螺釘
| Hexalobular socket countersunk head tapping screws
|
| ISO 14587-2001
| 內六角半沉頭（橢圓頭）自攻螺釘
| Hexalobular socket raised countersunk (oval) head tapping screws
|
| ISO 1478-1999
| 自攻螺釘用螺紋
| Tapping screws thread
|
| ISO 1479-1983
| 六角頭自攻螺釘
| Hexagon head tapping screws
|
| ISO 1481-1983
| 開槽盤頭自攻螺釘
| Slotted pan head tapping screws
|
| ISO 1482-1983
| 開槽沉頭自攻螺釘(通用頭型)
| Slotted countersunk (flat) head tapping screws (common head style)
|
| ISO 1483-1983
| 開槽半沉頭自攻螺釘(通用頭型)
| Slotted raised countersunk (oval) head tapping screws (common head style)
|
| ISO 15065-2005
| 頭部外形符合ISO 7721的沉頭螺釘用沉頭
| Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
|
| ISO 15480-1999
| 六角凸緣頭自鉆自攻螺釘
| Hexagon washer head drilling screws with tapping screw thread
|
| ISO 15481-1999
| 十字槽盤頭自鉆自攻螺釘
| Cross recessed pan head drilling screws with tapping screw thread
|
| ISO 15482-1999
| 十字槽沉頭自鉆自攻螺釘
| Cross recessed countersunk head drilling screws with tapping screw thread
|
| ISO 15483-1999
| 十字槽半沉頭自鉆自攻螺釘
| Cross recessed raised countersunk head drilling screws with tapping screw thread
|
| ISO 1580-1994
| 開槽盤頭螺釘 產品等級A級
| Slotted pan head screws; product grade A
|
| ISO 1703-2005
| 螺釘和螺母用裝配工具.命名和術語
| Assembly tools for screws and nuts - Designation and nomenclature
|
| ISO 1711-1-2007
| 螺釘和螺母用裝配工具.技術規范.第1部分:手動扳手和套筒
| Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets
|
| ISO 1711-2-2005
| 螺釘和螺母用裝配工具.技術規范 第2部分:機動套筒(扳手)
| Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets ("impact")
|
| ISO 1891-1979
| 螺栓、螺釘、螺母和附件 名詞和術語 三種語言版
| Bolts, screws, nuts and accessories; terminology and nomenclature trilingual edition
|
| ISO 2009-1994
| 開槽沉頭螺釘(通用頭型) 產品等級A級
| Slotted countersunk head screws (common head style); product grade A
|
| ISO 2010-1994
| 開槽半沉頭螺釘(通用頭型) 產品等級A級
| Countersunk slotted raised head screws (common head style); product grade A
|
| ISO 2236-1991
| 螺釘和螺母用裝配工具 鍛制的和管狀套筒板手 頭部最大外形尺寸
| Assembly tools for srews and nuts; forged and tubular socket wrenches; maximum outside head dimensions
|
| ISO 225-1983
| 緊固件 螺栓、螺釘、螺柱和螺母 尺寸代號和標注 三種語言版
| Fasteners; Bolts, screws, studs and nuts; Symbols and designations of dimensions Trilingual edition
|
| ISO 2342-2003
| 有柄開槽無頭螺釘
| Slotted headless screws with shank
|
| ISO 2351-1-2007
| 螺釘和螺母用裝配工具.機動旋具頭.第1部分:一字槽頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws
|
| ISO 2351-2-2002
| 螺釘和螺母用裝配工具.機動旋具頭.第2部分:十字凹頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws
|
| ISO 2351-3-2002
| 螺釘和螺母用裝配工具.機動旋具頭.第3部分:六角凹頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws
|
| ISO 2380-1-2004
| 螺釘和螺母用裝配工具.一字槽螺釘?shù)男?第1部分:手動或者機動旋具工作部
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers
|
| ISO 2380-2-2004
| 螺釘和螺母用裝配工具.一字槽螺釘?shù)男?第2部分:手動旋具的一般要求、旋桿長度和標志
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
| ISO 2568-1988
| 手用和機用圓螺絲板牙和手用板牙架
| Hand- and machine-operated circular screwing dies and hand-operated die stocks
|
| ISO 262-1998
| ISO一般用途米制螺紋 螺釘、螺栓和螺母的選用尺寸
| ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
|
| ISO 263-1973
| ISO英制螺紋 直徑與螺距系列及螺釘、螺栓和螺母的選用系列 直徑范圍0.06英寸～6英寸
| ISO inch screw threads; General plan and selection for screws, bolts and nuts; Diameter range 0,06 to 6 in
|
| ISO 2702-1992
| 熱處理鋼自攻螺釘 機械性能
| Heat-treated steel tapping screws; mechanical properties
|
| ISO 2725-1-2007
| 螺釘和螺母用裝配工具.第1部分:手動扳手
| Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets
|
| ISO 2725-2-2007
| 螺釘和螺母用裝配工具.方頭鉆動扳手.第2部分:機動扳手尺寸
| Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets ("impact")
|
| ISO 2725-3-2001
| 螺釘和螺母用裝配工具 方頭傳動套筒 第3部分：機動套筒（非撞擊） 尺寸
| Assembly tools for screws and nuts - Square drive sockets - Part 3: Machine-operated sockets ("non impact"); Dimensions
|
| ISO 273-1979
| 緊固件 螺栓和螺釘用通孔
| Fasteners; Clearance holes for bolts and screws
|
| ISO 2936-2001
| 螺釘和螺母用裝配工具 內六角扳手
| Assembly tools for screws and nuts - Hexagon socket screw keys
|
| ISO 3202-1997
| 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、帶內偏高扭矩十字槽或不打滑扳動結
| Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| ISO 3266-1984
| 一般起重用的吊環螺釘
| Eyebolts for general lifting purposes
|
| ISO 3315-1996
| 螺釘和螺母用裝配工具 手動方榫傳動套筒扳手傳動件 尺寸和試驗
| Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests
|
| ISO 3316-1996
| 螺釘和螺母用裝配工具 手動方榫傳動套筒扳手附件 尺寸和試驗
| Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests
|
| ISO 3317-1974
| 螺釘和螺母用裝配工具 機動工具的六角傳動端
| Assembly tools for screws and nuts; Square drive extension hexagon insert, for power socket wrenches
|
| ISO 3318-1990
| 螺釘和螺母用裝配工具 雙頭呆扳手、雙頭梅花扳手和兩用扳手 頭部外形最大寬度
| Assembly tools for screws and nuts; double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches; maximum widths of heads
|
| ISO 3506-1-1997
| 耐腐蝕不銹鋼緊固件的機械性能 第1部分:螺栓、螺釘和螺柱
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs
|
| ISO 3506-3-1997
| 耐腐蝕不銹鋼緊固件的機械性能 第3部分:緊定螺釘及類似的不受拉應力的螺紋緊固件
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress
|
| ISO 3506-4-2003
| 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws
|
| ISO 4017-1999
| 六角頭螺釘 產品等級A和B級
| Hexagon head screws - Product grades A and B
|
| ISO 4018-1999
| 六角頭螺釘 產品等級C級
| Hexagon head screws - Product grade C
|
| ISO 4026-2003
| 內六角平端定位螺釘
| Hexagon socket set screws with flat point
|
| ISO 4027-2003
| 內六角錐頭定位螺釘
| Hexagon socket set screws with cone point
|
| ISO 4028-2003
| 內六角制動端定位螺釘
| Hexagon socket set screws with dog point
|
| ISO 4029-2003
| 內六角圓端定位螺釘
| Hexagon socket set screws with cup point
|
| ISO 4229-1977
| 螺釘和螺母用裝配工具 開口為50mm～120mm的單頭扳手
| Assembly tools for screws and nuts; Single-head engineer's wrenches; Gaps from 50 to 120 mm
|
| ISO 4757-1983
| 螺釘用十字槽
| Cross recesses for screws
|
| ISO 4759-1-2000
| 緊固件公差 第1部分:螺栓、螺釘、螺栓和螺母 產品等級A、B和C級
| Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C
|
| ISO 4759-3-2000
| 緊固件公差 第3部分:螺栓、螺釘和螺母用平墊圈 產品等級為A和C級
| Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C
|
| ISO 4762-2004
| 內六角螺釘
| Hexagon socket head cap screws
|
| ISO 4766-1983
| 開槽平端緊定螺釘
| Slotted set screws with flat point
|
| ISO 5414-1-2002
| 扁方柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).第1部分:刀柄驅動系統的尺寸
| Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks
|
| ISO 5414-2-2002
| 扁方柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).第2部分:夾頭的連接尺寸和名稱與符號
| Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation
|
| ISO 5415-1977
| 帶7/24外圓錐和莫氏內圓錐縮徑套筒和連接螺釘
| Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
|
| ISO 5835-1991
| 外科植入物 不對稱螺紋、六角頭、球形下表面金屬骨螺釘 尺寸
| Implants for surgery; metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread; dimensions
|
| ISO 5836-1988
| 外科植入物 金屬接骨板 與不對稱螺紋、球形下表面螺釘對應的孔
| Implants for surgery; metal bone plates; holes corresponding to screws with asymmetrical thread and spherical under-surface
|
| ISO 5856-1991
| 航空航天 強度等級小于或等于1100 MPa、金屬材料制成、有涂層或無涂層、帶有中或短長度MJ螺紋、大徑桿型及
| Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
|
| ISO 6004-1991
| 高山雪橇 雪橇緊固螺釘 要求
| Alpine skis; ski binding screws; requirements
|
| ISO 6005-1991
| 高山雪橇 雪橇緊定螺釘 試驗方法
| Alpine skis; ski binding screws; test methods
|
| ISO 6157-1-1988
| 緊固件 表面缺陷 第1部分:螺栓、螺釘和螺柱特殊要求
| Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements
|
| ISO 6157-3-1988
| 緊固件 表面缺陷 第3部分:螺栓、螺釘和螺柱特殊要求
| Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements
|
| ISO 6410-1-1993
| 技術制圖 螺釘和螺紋部件 第1部分:通用規范
| Technical drawings; screw threads and threaded parts; part 1: general conventions
|
| ISO 6410-2-1993
| 技術制圖 螺釘和螺紋部件 第2部分:螺紋嵌鑲件
| Technical drawings; screw threads and threaded parts; part 2: screw thread inserts
|
| ISO 6410-3-1993
| 技術制圖 螺釘和螺紋部件 第3部分:簡化表示
| Technical drawings; screw threads and threaded parts; part 3: simplified representation
|
| ISO 6475-1989
| 外科植入物 不對稱螺紋和球形下表面的金屬接骨螺釘 機械性能要求和試驗方法
| Implants for surgery; metal bone screws with asymmetrical thread and spherical under-surface; mechanical requirements and test methods
|
| ISO 6787-2001
| 螺釘和螺母用裝配工具 活扳手
| Assembly tools for screws and nuts - Adjustable wrenches
|
| ISO 6788-1997
| 螺釘和螺母用裝配工具 十字柄套筒扳手 尺寸和扭矩試驗
| Assembly tools for screws and nuts - Four-way socket wrenches - Dimensions and torque test
|
| ISO 6789-2003
| 螺釘和螺母用裝配工具.手動轉矩工具.設計一致性試驗、質量一致性試驗和重新校準程序的要求和試驗方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
|
| ISO 691-2005
| 螺釘和螺母用裝配工具.扳手和套筒扳手的開口.常用公差
| Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use
|
| ISO 7045-1994
| H型或Z型十字槽盤頭螺釘 產品等級A級
| Pan head screws with type H or type Z cross recess; product grade A
|
| ISO 7046-1-1994
| H型或Z型十字槽沉頭(通用頭型)螺釘 產品等級A級 第1部分:性能等級 鋼4.8級
| Countersunk flat head screws (common head style) with type H or type Z cross recess; product grade A; part 1: steel of property class 4.8
|
| ISO 7046-2-1990
| 十字槽沉頭(通用頭型)螺釘 產品等級A級 第2部分:性能等級鋼8.8級、不銹鋼和有色金屬
| Cross recessed countersunk flat head screws (common head style); grade A; part 2: steel of property class 8.8, stainless steel and non-ferrous metals
|
| ISO 7047-1994
| H型或Z型十字槽半沉頭(通用頭型)螺釘 產品等級A級
| Countersunk raised head screws (common head style) with type H or type Z cross recess; product grade A
|
| ISO 7048-1998
| 十字槽圓柱頭螺釘
| Cross recessed cheese head screws
|
| ISO 7049-1983
| 十字槽盤頭自攻螺釘
| Cross recessed pan head tapping screws
|
| ISO 7050-1983
| 十字槽沉頭(通用頭型)自攻螺釘
| Cross recessed countersunk (flat) head tapping screws (common head style)
|
| ISO 7051-1983
| 十字槽半沉頭(通用頭型)自攻螺釘
| Cross recessed raised countersunk (oval) head tapping screws
|
| ISO 7053-1992
| 六角凸緣自攻螺釘
| Hexagon washer head tapping screws
|
| ISO 7085-1999
| 表面淬硬并回火的米制自擠螺釘機械和工作性能要求
| Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
|
| ISO 7378-1983
| 緊固件 螺栓、螺釘和螺柱 開口銷孔和金屬絲孔
| Fasteners; Bolts, screws and studs; Split pin holes and wire holes
|
| ISO 7379-1983
| 內六角圓柱頭軸肩螺釘
| Hexagon socket head shoulder screws
|
| ISO 7380-2004
| 內六角平圓頭螺釘
| Hexagon socket button head screws
|
| ISO 7434-1983
| 開槽錐端緊定螺釘
| Slotted set screws with cone point
|
| ISO 7435-1983
| 開槽長圓柱端緊定螺釘
| Slotted set screws with long dog point
|
| ISO 7436-1983
| 開槽凹端緊定螺釘
| Slotted set screws with cup point
|
| ISO 7721-1983
| 沉頭螺釘 頭部形狀和測量
| Countersunk head screws; Head configuration and gauging
|
| ISO 7721-2-1990
| 沉頭螺釘 第2部分:十字槽插入深度
| Countersunk flat head screws; part 2: penetration depth of cross recesses
|
| ISO 7738-2001
| 螺釘和螺母用裝配工具 兩用扳手 扳手長度和頭部最小厚度
| Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
|
| ISO 7794-1991
| 越野雪橇 雪橇緊固螺釘 要求
| Cross-country skis; ski binding screws; requirements
|
| ISO 7795-1994
| 越野雪橇 雪橇緊固螺釘 試驗方法
| Cross-country skis - Ski-binding screws - Test methods
|
| ISO 7913-1994
| 航空航天 米制螺栓和螺釘?shù)男螤詈臀恢霉? | Aerospace - Bolts and screws, metric - Tolerances of form and position
|
| ISO 8319-1-1996
| 矯形外科器械 扳動連接件 第1部分:內六角螺釘用扳手
| Orthopaedic instruments - Drive connections - Part 1: Keys for use with screws with hexagon socket heads
|
| ISO 8319-2-1986
| 矯形外科器械 扳動連接件 第2部分:一字槽頭、十字槽和十字槽頭螺釘?shù)男? | Orthopaedic instruments; Drive connections; Part 2 : Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
|
| ISO 8662-7-1997
| 便攜式手提動力工具 手柄振動測量 第7部分:具有沖擊、脈沖或棘輪作用力的扳手、螺絲刀和擰螺母機
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, srewdrivers and nut runners with impact, impulse or ratched action
|
| ISO 8676-1999
| 米制細牙六角頭螺釘 產品等級A和B級
| Hexagon head screws with metric fine pitch thread - Product grades A and B
|
| ISO 8764-1-2004
| 螺釘和螺母用裝配工具.十字槽頭螺釘用旋具.第1部分:驅動頭
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips
|
| ISO 8764-2-2004
| 螺釘和螺母用裝配工具.十字槽頭螺釘用旋具.第2部分:手動旋具刀身長度和標記的一般要求
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
| ISO 8839-1986
| 緊固件機械性能 有色金屬制造的螺栓、螺釘、螺柱和螺母
| Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals
|
| ISO 885-2000
| 普通螺栓和螺釘 米制系列 頭下圓角半徑
| General purpose bolts and screws - Metric series - Radii under the head
|
| ISO 887 Technical Corrigendum 1-2006
| 通用米制螺栓、螺釘和螺母用普通墊圈.一般示意圖.技術勘誤1
| Plain washers for metric bolts, screws and nuts for general purposes - General plan; Technical Corrigendum 1
|
| ISO 887-2000
| 米制普通螺栓、螺釘和螺母用平墊圈 總方案
| Plain washers for metric bolts, screws and nuts for general purposes - General plan
|
| ISO 888-1976
| 螺栓、螺釘和螺柱 普通螺栓的公稱長度及螺紋長度
| Bolts, screws and studs; Nominal lengths, and thread lengths for general purpose bolts
|
| ISO 898-1-1999
| 碳鋼和鑄鋼制造的緊固件機械性能 第1部分:螺栓、螺釘和螺柱
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs
|
| ISO 898-5-1998
| 碳鋼和鑄鋼制造的緊固件機械性能 第5部分:緊定螺釘及類似的不受拉應力的螺紋緊固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses
|
| ISO 898-7-1992
| 緊固件機械性能 第7部分:螺栓與螺釘?shù)呐ぞ卦囼?yàn)和最小扭矩公稱直徑1mm～10mm
| Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
|
| ISO 8992-2005
| 緊固件.螺栓、螺釘、螺柱和螺母通用技術條件
| Fasteners - General requirements for bolts, screws, studs and nuts
|
| ISO 9087-1998
| 木材 軸向荷載作用下釘子和螺釘固著力的確定
| Wood - Determination of nail and screw holding power under axial load application
|
| ISO 9268-1988
| 外科植入物 具有錐形下表面頭部的金屬接骨螺釘 尺寸
| Implants for surgery; metal bone screws with conical under-surface of head; dimensions
|
| ISO 9269-1988
| 外科植入物 金屬接骨板 與錐形下表面螺釘對應的孔和槽
| Implants for surgery; metal bone plates; holes and slots corresponding to screws with conical under-surface
|
| 編號 | 中文名稱 | 英文名稱 |
|---|