| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 15237-1980
| 連續機械裝卸設備.將元件安裝到皮帶上的固定螺釘和凹墊圈
| Continuous mechanical handling equipment; seating screws and cupped washers for the attachment of components to belts
|
| DIN 16286-1997
| 符合DIN EN 837-1帶連接銷的G1/2B鎖緊螺絲
| Screw plugs with male connection G 1/2 B according to DIN EN 837-1
|
| DIN 18182-2-1987
| 石膏板上使用的附件.板墻螺釘
| Accessories for use with gypsum plasterboards; dry wall screw
|
| DIN 2240-2-2001
| 幾何產品規范(GPS).手柄.第2部分:公稱直徑可達40mm的量規構件.手柄、固定螺釘和卡箍
| Geometrical Product Specification (GPS) - Handles - Part 2: For gauging members over 40 mm nominal diameter; Handles, fixing screws and clamps
|
| DIN 2299-1-2003
| 產品幾何量技術規范.ISO米制螺釘螺紋不過端環規.第1部分:公稱直徑為1至200mm.通用
| Geometrical Product Specification (GPS) - NOT GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm; General purposes
|
| DIN 2325-2007
| 帶內細齒螺釘?shù)男?扭矩測試用螺釘驅動頭、量規和試樣
| Screw driver for screws with internal serration - Screw driver points, gauges and test specimens for torque testing
|
| DIN 25200-1997
| 鐵路車輛用螺釘、螺栓和螺母.一覽表
| Screws, bolts and nuts for rail vehicles - Summary
|
| DIN 267-27-2004
| 緊固件.帶粘附層的鋼制螺釘、螺栓和螺柱技術規范
| Fasteners - Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications
|
| DIN 267-28-2004
| 緊固件.第28部分:帶壓緊層的鋼制螺釘、螺栓和螺柱.技術規范
| Fasteners - Part 28: Steel screws, bolts and studs with locking coating; Technical specifications
|
| DIN 267-30-2001
| 緊固件.交貨技術條件.第30部分:特性等級為10.9的米制滾絲螺釘
| Fasteners - Technical delivery conditions - Part 30: Metric thread rolling screws of property class 10.9
|
| DIN 28139-2-1985
| 搪瓷容器的焊接凸肩.M型人孔、手孔和夾緊螺釘連接的安裝孔.連接尺寸
| Welding necks for glass lined vessels; form M manhole, handhole and assembly opening for clamp screw connections; connecting, dimensions
|
| DIN 28601-2000
| 延性鑄鐵管道和配件.螺紋套管接頭.組件、套管、螺絲環、密封環和滑動環
| Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
|
| DIN 29782-1988
| 航空航天.自由移動或螺釘鎖緊的鋼絲螺紋鑲?cè)爰?技術規范
| Aerospace; wire thread inserts; free running or screw-locking; technical specification
|
| DIN 3124-2007
| 手動六角頭螺釘用方頭驅動套筒扳手
| Hand-operated socket wrenches, square drive for hexagon screws
|
| DIN 3126-2004
| 螺絲刀和連接件用傳動端.尺寸
| Drive ends for screwdriver bits and connecting parts - Dimensions
|
| DIN 316-1998
| 圓形翼的蝶形螺釘
| Wing screws, rounded wings
|
| DIN 318-1999
| 翼型螺釘.有邊的翼型件
| Wing crews - Edges wings
|
| DIN 3335-1968
| 加熱裝置的帶螺絲端部的混合閥.三通混合閥.四通混合閥.公稱壓力6.使用溫度110 ℃.安裝尺寸
| Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
|
| DIN 34800-2005
| 帶小凸緣的外六角驅動的螺栓和螺釘
| Bolts and screws with external hexalobular driving feature with small flange
|
| DIN 34801-1999
| 大凸緣六角頭驅動螺栓及螺釘
| Bolts and screws with external hexalobular driving feature with large flange
|
| DIN 34802-2001
| 大扳擰矩內六角頭螺釘
| Hexalobular socket heat cap screw with large driving feature
|
| DIN 34803-2001
| 螺栓、螺釘和雙頭螺栓開口銷與線孔
| Split pin holes and wire holes for bolts, screws and studs
|
| DIN 34810-1999
| 六角頭塑料螺釘
| Plastic hexagon head screws
|
| DIN 34811-1999
| 帶十字槽塑料六角頭螺釘
| Plastic flat head screws with cross recess
|
| DIN 34812-1999
| 帶十字槽的塑料盤頭螺釘
| Plastic pan head screws with cross recess
|
| DIN 34813-1999
| 帶十字槽的圓頭塑料螺釘
| Plastic cross recessed cheese head screws
|
| DIN 34817-2001
| 米制螺紋焊接螺釘
| Weld screws with metric thread
|
| DIN 34819-2002
| 六角葉片套筒半沉頭帶卡套攻絲螺釘
| Hexalobular socket raised head tapping screws with collar
|
| DIN 34821-2005
| 12孔座的凸頭螺釘
| Cheese head screws with 12 point socket
|
| DIN 34822-2005
| 帶法蘭的12孔座凸頭螺釘
| Cheese head screws with flange with 12 point socket
|
| DIN 34823-2005
| 12孔座的半埋頭螺釘
| Raised countersunk head screws with 12 point socket
|
| DIN 34824-2007
| 螺栓和螺釘用12孔座
| 12 point socket for bolts and screws
|
| DIN 34827-2005
| 內六角螺釘
| Hexalobular socket set screws
|
| DIN 4000-151-2005
| 特性表.第151部分:螺釘和螺母用手動和機動裝配工具的連接部件
| Tabular layouts of properties - Part 151: Connecting parts for hand- and machine-operated assembly tools for screws and nuts
|
| DIN 4000-2 Bb.1-1999
| 零件特性圖表.第2部分:螺釘和螺母.螺釘?shù)募夹g(shù)標準
| Tabular layouts of article characteristics - Part 2: Screws and nuts; attribution to technical standards on screws
|
| DIN 4000-2 Bb.2-1999
| 零件特性圖表.第2部分:螺釘和螺母.螺母的技術標準
| Tabular layouts of article characteristics - Part 2: Screws and nuts; attribution to technical standards on nuts
|
| DIN 404 Berichtigung 1-2007
| 開槽絞盤螺釘.DIN 404-2006技術勘誤
| Slotted capstan screws, Corrigenda to DIN 404:2006-08
|
| DIN 404-2006
| 槽頭絞盤螺釘
| Slotted capstan screws
|
| DIN 41673-1979
| 微型熔斷器.可置換的管式熔斷體用的6.3A.250V.扁平的螺絲型熔斷器底座
| Miniature fuses; screw type fuse-base, 6,3 A, 250 V, flat, for interchangeable cartridge fuse-links
|
| DIN 41681-1965
| 微型熔斷器.可互換的熔絲用500V至3kV的熔斷器支架.螺絲蓋熔斷器
| Miniature fuses; fuse holder, 500 V to 3 kV, for interchangeable fuse links, fuse holder, screw caps
|
| DIN 43165-1985
| 電力牽引.空架線配件的圓端螺釘
| Electric traction; screws with cup point for overhead fittings
|
| DIN 44879-1985
| 帶金屬護罩的管狀電加熱器的連接管用的扁平六角螺母和螺釘頭
| Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated
|
| DIN 4503-1-1993
| 照相機及其附件用三角架連接件.螺釘連接件
| Tripod connections for cameras and accessories; screw connections
|
| DIN 475-1-1984
| 第1部分:螺栓、螺釘、閥門和配件用扳手開口度
| Widths across flats for bolts, screws, valves and fittings
|
| DIN 48319-1962
| 帶鉤螺釘
| Hook screws
|
| DIN 48334-1977
| 架空電力線的松緊螺絲扣.
| Turnbuckles for overhead power lines
|
| DIN 49360-3-1986
| D型熔斷器.第16部分:管接頭螺釘扳手用帶功能尺寸的 E 16 測量環
| D-type fuses; E 16 gauge rings with functional dimensions for adapter screw fitters
|
| DIN 502-2004
| 傳動元件.用兩個螺釘緊固的法蘭軸承
| Driving Components - Flange bearings - Fastened with two screws
|
| DIN 503-2004
| 傳動元件.用四個螺釘緊固的法蘭軸承
| Driving components - Flange bearings - Fastened with four screws
|
| DIN 5042-8-1985
| 燃?xì)鉄艉兔簹鉄?噴射器的噴射管和空氣調節螺釘
| Combustion lights and gas lights; injector jet pipes and air control screws
|
| DIN 505-2004
| 傳動元件.用兩個螺釘緊固的帶蓋軸承和無蓋軸承
| Driving components - Cap bearings, half bearings - Fastening with two screws
|
| DIN 506-2004
| 傳動元件.用四個螺釘緊固的帶蓋軸承和無蓋軸承
| Driving components - Cap-bearings, half bearings - Fastening with four screws
|
| DIN 5200-1987
| 槽頭螺釘用雙補償改錐.尺寸
| Screwdrivers for slotted head screws, double offset; dimensions
|
| DIN 55406-2007
| 包裝.聚乙烯或聚丙烯制作的單層或雙層28mm螺絲蓋和鋁制28mm保溫瓶的交貨、購買和使用特殊規范
| Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)
|
| DIN 5586-1989
| 軌道車輛用壓縮空氣裝置.帶凸緣和通風的鎖緊螺釘
| Compressed air equipment for rail vehicles; locking screws with collar and vent
|
| DIN 561-1995
| 六角頭長圓柱端緊定螺釘
| Hexagon head set screws with small hexagon and dog point
|
| DIN 564-1995
| 六角頭短圓截錐端緊定螺釘
| Hexagon head set screws with small hexagon and half dog point and flat cone point
|
| DIN 56922-1982
| 劇場工程.舞臺布景方向.舞臺用螺釘和手動螺釘
| Theatre engineering, stage directions scenery; stage-screws, hand screws
|
| DIN 571-1986
| 六角頭木螺釘
| Hexagon head wood screws
|
| DIN 58450-1972
| 帶槽扁圓頭螺釘.刻度螺釘
| Slotted flat mushroom head screw; scale-screw
|
| DIN 58520-1-1994
| 繪圖儀器用螺釘.第1部分:T 型螺栓
| Screws for drawing instruments; part 1: T-bolts
|
| DIN 58520-2-1996
| 繪圖儀用螺釘.第2部分:半沉頭螺釘
| Bolts for drawing instruments - Part 2: Deep flat countersunk bolt
|
| DIN 58530-1995
| 繪圖儀用調節螺釘
| Adjusting screws for drawing instruments
|
| DIN 5903-1-1997
| 魚尾板螺釘.第1部分:半圓頭和橢圓頸
| Fish bolts - Part 1: With round head and oval neck
|
| DIN 5903-2-1997
| 魚尾板螺釘.第2部分:方頭
| Fish bolts - Part 2: With square head
|
| DIN 5914-1965
| 方頭的基板螺釘
| Baseplate screws with rectangular head
|
| DIN 6305-2002
| 帶固定卡式螺栓的螺絲旋桿螺母
| Tommy nuts with fixed clamping bolt
|
| DIN 6307-2002
| 帶移動卡式螺栓的螺絲旋桿螺母
| Tommy nuts with movable clamping bolt
|
| DIN 6332-2003
| 帶推力點的平頭螺釘
| Grub screws with thrust point
|
| DIN 6367-2003
| 銑床刀桿用銑刀緊固螺絲
| Cutter retaining screws for milling machine arbors
|
| DIN 6368-1999
| 刀片固定螺釘用扳手
| Wrenches for cutter retaining screws
|
| DIN 649-1987
| T形頭螺釘用的T形槽
| T-slots for T-head bolts
|
| DIN 65004-1979
| 航空和航天.長螺紋帶TORQ-SET槽的盤頭螺釘.
| Aerospace; pan head screws with TORQ-SET recess, long thread
|
| DIN 65055-1992
| 航空航天.帶螺紋的操縱鋼纜端部和松緊螺絲扣.技術規范.不適用于新設計
| Aerospace; threaded control cable ends and turnbarrels; technical specification; inactive for new design
|
| DIN 65110-1984
| 航空和航天.螺釘和螺栓的十二角頭
| Aerospace; bihexagonal heads for screws and bolts
|
| DIN 65121-1992
| 航空航天.螺栓、螺釘、螺母和有關零件.供車間查看的產品一覽表和選用.不適用于新設計
| Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design
|
| DIN 65149-1980
| 航空和航天.非支承件用鋼螺釘M3和M4.交貨技術條件
| Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification
|
| DIN 65188-1986
| 航空航天.螺釘鎖緊嵌件.鋁合金復合材料制.帶MJ螺紋.小結構封閉式.
| Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy
|
| DIN 65189-1986
| 航空航天.復合材料用的鋁合金制的螺釘鎖緊開口式的帶MJ螺紋的嵌件
| Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy
|
| DIN 65190-1986
| 航空和航天.復合材料用的鋁合金制的螺釘鎖緊封閉式的帶MJ螺紋的嵌件
| Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy
|
| DIN 65191-2002
| 航空航天.有螺紋的零件浮動和螺釘鎖緊的帶MJ螺紋的耐腐蝕鋼制復合材料用插入件
| Aerospace - Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel
|
| DIN 65197-1989
| 航空航天.制螺釘用的鈦合金圓棒料及線材.尺寸和質量
| Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses
|
| DIN 65253-2002
| 帶內細齒的螺釘用的L形扳手
| L-wrench for screws with internal serration
|
| DIN 65254-2002
| 六角嵌入式刀頭.帶內細齒的螺釘
| Hexagon insert bits - For screws with internal serrations
|
| DIN 65267-1992
| 航空和航天.溫度235℃以下、螺紋接近于頭部的、標稱抗拉強度900MPa的帶MJ螺紋的六角螺釘
| Aerospace; screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
|
| DIN 65269-1987
| 航空航天.公稱抗拉強度900MPa 使用溫度為235以下的鋼制短螺紋長度MJ螺紋的帶筋狀翼形的扭矩調節十字槽頭緊
| Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
|
| DIN 65284-1987
| 航空航天..公稱抗拉強度1100MPa使用溫度為425℃以下的耐腐蝕鋼制全螺紋的MJ螺紋的帶筋狀翼形的扭矩調節十字
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
|
| DIN 65285-1987
| 航空航天.公稱抗拉強度1100MPa使用溫度為425℃以下的耐腐蝕鋼制短螺紋長度MJ螺紋的帶有筋狀翼形的扭矩調節
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
|
| DIN 65286-1987
| 航空航天.抗拉強度900MPa 使用溫度為235以下的鋼制短螺紋長度MJ螺紋的帶筋狀翼形的扭矩調節十字槽頭埋頭螺
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °c
|
| DIN 65289-1987
| 航空和航天.公稱抗拉強度1100MPa使用溫度為315℃以下的鈦合金制短螺紋長度MJ螺紋的帶有筋狀翼形的扭矩調節
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
|
| DIN 653-2006
| 短型滾花大頭螺釘
| Knurled thumb screws, low type
|
| DIN 65307-1986
| 航空航天.復合材料用小型閉式螺釘鎖緊帶MJ螺紋耐腐蝕鋼制襯套
| Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel
|
| DIN 65308-1986
| 航空航天.復合材料用開口式用螺釘鎖緊帶MJ螺紋的耐腐蝕鋼制襯套
| Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel
|
| DIN 65309-1986
| 航空航天.復合材料用閉式用螺釘鎖緊帶MJ螺紋的耐腐蝕鋼制襯套
| Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, corrosion-resisting steel
|
| DIN 65317-1987
| 航空航天.公稱抗拉強度1100MPa使用溫度為235℃以下的鋼制短螺紋長度MJ螺紋的帶有筋狀翼形的扭矩調節十字槽
| Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
|
| DIN 65349-2001
| 航空航天.米制螺紋螺母和相關螺釘部件鎖扭矩試驗.試驗方法
| Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods
|
| DIN 65393-2002
| 航空航天.環箍鎖緊和螺釘鎖緊的鋼制帶MJ螺紋的螺紋插入件.分類:900 MPa/1100 MPa/1250 MPa/1550 MPa/235℃
| Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 °C
|
| DIN 65394-2003
| 航空航天.耐腐蝕鋼制帶環鎖和MJ螺紋的螺釘鎖緊的絲套.等級:900 MPa/1100MPa/1250 MPa/1550 MPa/315鳦/425鳦
| Aerospace - Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C
|
| DIN 65397-2003
| 航空航天.耐腐蝕鋼制帶MJ螺紋的閉鎖、螺釘鎖緊的絲套.等級:1100MPa/315℃/425℃
| Aerospace - Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
|
| DIN 65398-2003
| 航空航天.耐腐蝕鋼制帶MJ螺紋的閉鎖、螺釘鎖緊的絲套.等級:900MPa/1100 MPa/315℃
| Aerospace - Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/315 °C
|
| DIN 65451-2003
| 航空航天.帶MJ螺紋的閉鎖、螺釘鎖緊的鋼制絲套.等級:900MPa/1100 MPa/235℃
| Aerospace - Thread inserts, with MJ thread, locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/235 °C
|
| DIN 65522-1984
| 航空和航天.帶MJ螺紋、螺紋接近頭部、耐蝕鋼制、標稱抗拉強度700MPa、溫度425℃以下六角頭螺釘
| Aerospace; screws, hexagon, with MJ-thread, threaded opproximatley to head, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C
|
| DIN 65533-1987
| 航空航天.螺栓、螺釘和螺母.材料的分配及表面處理.推薦性選擇
| Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection
|
| DIN 65542-1987
| 航空航天.公稱抗拉強度1250MPa使用溫度為315℃/425℃以下的鎳合金制短螺紋長度MJ螺紋的帶有筋狀翼形的扭矩
| Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
|
| DIN 65557-1989
| 航空和航天.公稱抗拉強度1100MPa.使用溫度在315℃以下鈦合金制全攻螺紋MJ螺紋的帶肋翼的扭矩調節十字槽盤頭
| Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
|
| DIN 65558-1989
| 航空航天.公稱抗拉強度1100MPa.使用溫度在315℃以下鈦合金制全攻螺紋MJ螺紋的帶肋翼的扭矩調節十字槽沉頭螺
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
|
| DIN 68345-1968
| 手柄和掃帚用螺釘連接.螺帽與螺塞
| Screwed connection for handles and brooms; screw cap and screw plug
|
| DIN 68856-5-1983
| 家具用五金件.家具裝配附件術語.高度調節螺釘、家具腿、底架
| Hardware for furniture; terms for furniture fittings; height adjusters, furniture legs, underframes
|
| DIN 6900-5-2004
| 粗牙螺紋螺釘和墊圈組件.第5部分:帶錐形彈簧墊圈
| Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer
|
| DIN 69051-1-1989
| 機床.球形螺釘.術語.標記系統
| Machine tools; ball screws; terminology, designation system
|
| DIN 69051-3-1989
| 機床.球形螺釘.驗收條件及驗收試驗
| Machine tools; ball screws; acceptance conditions and acceptance tests
|
| DIN 69051-5-2002
| 機床.球形螺釘.第5部分:球形螺母的安裝尺寸
| Machine tools - Ball screws - Part 5: Mounting dimensions for ball nuts
|
| DIN 6908-1995
| 螺釘和墊圈組件用錐形彈簧墊圈
| Conical spring washers for screw and washer assemblies
|
| DIN 6911-2004
| 帶導銷的六角凹頭螺絲扳手
| Hexagon socket screw keys with pilot
|
| DIN 6912-2002
| 內六角中心低圓柱頭螺釘
| Hexagon socket head cap screws with centre, with low head
|
| DIN 6928-2002
| 六角凸緣自攻螺釘
| Hexagon washer head tapping screws
|
| DIN 70614-1989
| 汽車制造.小寬度扳手開口度六角頭螺釘(不適于新結構)
| Automotive engineering; hexagon head screws with small widths across flats (not for new constructions)
|
| DIN 71436-1989
| 橄欖形壓緊聯接器.與管接頭配用的空心螺釘管接頭和環形管接頭
| Compression couplings with olives; hollow screw fittings and ring connection fittings for use with union nuts
|
| DIN 71989-1982
| 控制鋼絲繩的調整螺釘
| Adjusting screws for cables for controls
|
| DIN 72331-1-1979
| 起動機蓄電池用電纜連接器.第1部分:最大可達70平方毫米的導線截面用螺絲接線端
| Cable connectors for starter batteries; screw terminals for conductor cross sections up to 70 mm<(hoch)2>
|
| DIN 72331-2-1979
| 起動機蓄電池用電纜連接器.第2部分:導線截面范圍為 50 - 120 平方毫米的螺絲接線端
| Cable connectors for starter batteries; screw terminals for conductor cross sections from 50 to 120 mm<(hoch)2>
|
| DIN 72786-2-1990
| 汽車擋風玻璃刮水器.雨刮臂.螺絲固定C型刮水片
| Windscreen and rear window wiper systems for road vehicles; wiper arm and blade assembly; type C wiper blade for screw fastening
|
| DIN 73368-1986
| 燃料噴射裝置的溢流閥和空心螺釘
| Overflow valves and hollow screw for fuel injection devices
|
| DIN 74-2003
| DIN EN 27721規定的沉頭螺釘埋頭孔(帶釘頭沉頭螺釘除外)
| Countersinks for countersunk head screws except countersunk head screws with heads according to DIN EN 27721
|
| DIN 7422-2002
| 手動式六角凹頭螺釘用方形驅動刀頭
| Bits with square drive for hexagon socket screws, hand operated
|
| DIN 7433-1978
| 用于棘輪螺釘旋具的內六角插頭的適配器
| Adapters for Hexagon Insert Bits for Use with Spiral Ratchet Drivers
|
| DIN 7500-1-2007
| 表面淬火和回火的ISO米制螺紋滾絲螺釘.第1部分:型號、命名和符號及要求
| Case hardened and tempered thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements
|
| DIN 7500-2-1984
| ISO 米制螺紋用螺紋壓制螺釘.孔直徑的指導值
| Thread rolling screws for ISO metric thread; guideline values for hole diameters
|
| DIN 7513-1995
| 螺紋切削螺釘.六角頭螺釘和槽頭螺釘.尺寸、要求、檢驗
| Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing
|
| DIN 7516-1995
| 十字槽螺紋切削螺釘.尺寸、要求和檢驗
| Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing
|
| DIN 7643-2005
| 壓緊聯軸節.環形鼓形管用空心螺釘
| Compression couplings - Hollow screws for ring-type banjos
|
| DIN 787-2005
| T型槽用螺栓和螺釘
| Bolts and screws for T-slots
|
| DIN 792-1976
| 圓柱形沉頭螺釘
| Cylindrical counter sunk screws
|
| DIN 7975-1989
| 自攻螺釘?shù)倪B接.芯孔直徑的參比值和用途.
| Tapping screw connections; guideline values for core hole diameters and use
|
| DIN 7984-2002
| 內六角低圓柱頭螺釘
| Hexagon socket head cap screws with low head
|
| DIN 7995-1984
| 十字槽半沉頭木螺釘
| Cross recessed raised countersunk head wood screws
|
| DIN 7996-1986
| 十字槽盤頭木螺釘
| Cross recessed pan head wood screws
|
| DIN 7997-1984
| 十字槽沉頭木螺釘
| Cross recessed countersunk head wood screws
|
| DIN 7998-1975
| 木螺釘用螺紋和螺紋端
| Threads and Thread Ends for Wood Screws
|
| DIN 81402-1978
| 螺釘安裝的船艙門用鉸鏈
| Hinges for ship's cabinet doors, for screwing-on
|
| DIN 8243-1969
| 精密儀器的槽頭圓頭螺釘.M 0.3至M 1.4
| Slotted Cheese Head Screws for Fine Mechanics; M 0.3 to M 1.4
|
| DIN 8245-1972
| 精密儀器用槽頭沉頭螺釘.M 0.4至M 1.4
| Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4
|
| DIN 8272-1982
| 手表和鐘表擺輪的螺釘
| Balance-screws for watches and clocks
|
| DIN 8374-2006
| 沉頭螺釘安裝沉孔和通孔用的帶平行鉆柄的多刃階梯麻花鉆
| Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws
|
| DIN 8375-2006
| 沉頭螺釘安裝沉孔和通孔用的帶莫氏錐柄的多刃階梯麻花鉆
| Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws
|
| DIN 8376-2006
| 內六角頭圓頭螺釘和一字槽圓頭螺釘安裝通孔和沉孔用直柄多刃階梯麻花鉆
| Subland twist drills with parallel shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
|
| DIN 8377-2006
| 內六角頭圓頭螺釘和一字槽圓頭螺釘安裝通孔和沉孔用莫氏錐柄多刃階梯麻花鉆
| Subland twist drills with Morse taper shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
|
| DIN 85339-1996
| 帶臺階和外六角鎖緊螺釘.鎖緊頭和排放孔
| Hexagon head screw plugs - With retaining pin and bleeding hole
|
| DIN 87314-1987
| 泄水口螺釘堵頭用的外四方扳手
| Male square wrenches for drain screws
|
| DIN 89284-2007
| 符合DIN 89280的安裝孔和密封管用帽螺釘.德文和英文本
| Cap srews for mounting holes and glands according to DIN 89280; Text in German and English
|
| DIN 89300-1995
| 16 A、500 V 額定載面最大可達 2.5 平方毫米的帶緊固螺絲的終端連接器
| Terminal connectors with clamping-screw, 16 A, 500 V, for nominal cross-sectional areas up to 2,5 mm<(hoch)2>
|
| DIN 898-1995
| 螺釘和螺母的裝配工具.概述、術語和定義
| Assembly tools for screws and nuts - Survey, terms and definitions
|
| DIN 920-2006
| 小盤開槽平頭螺釘
| Slotted pan head screws with small head
|
| DIN 921-2007
| 開槽大圓盤頭螺釘
| Slotted pan head screws with large head
|
| DIN 923-2006
| 帶肩的平頭槽頭螺釘
| Slotted pan head screws with shoulder
|
| DIN 924-2006
| 帶全蝸桿槽頭半沉頭螺釘
| Slotted raised countersunk head screws with full dog point
|
| DIN 925-2006
| 帶全蝸桿開槽沉頭螺釘
| Slotted countersunk head screws with full dog point
|
| DIN 927-2006
| 帶肩槽頭螺釘
| Slotted shoulder screws
|
| DIN 931 Bb.1-1986
| 帶桿六角頭螺釘.重量
| Hexagon head bolts with shank; masses
|
| DIN 95-1986
| 帶槽半沉頭木螺釘
| Slotted raised countersunk (oval) head wood screws
|
| DIN 96-1986
| 帶槽圓頭木螺釘
| Slotted round head wood screws
|
| DIN 962-2001
| 螺栓、螺釘、雙頭螺栓和螺母.標識、型號和精整
| Bolts, screws, studs and nuts - Designation, types and finishes
|
| DIN 967-2002
| 帶卡套十字槽盤頭螺釘.產品等級A
| Cross recessed pan head screws with collar - Product grade A
|
| DIN 968-2002
| 帶卡套十字槽盤頭自攻螺釘
| Cross recessed pan head tapping screws with collar
|
| DIN 97-1986
| 帶槽沉頭（平）木螺釘
| Slotted countersunk (flat) head wood screws
|
| DIN 974-1-1991
| 六角凹頭有帽螺釘和圓頭螺釘或大柱頭螺釘用沉孔直徑.第1部分:制造尺寸
| Diameters of counterbores for hexagon socket head cap screws and screws with cheese head or pan head; manufacturing dimensions
|
| DIN 974-2-1991
| 六角螺栓、螺釘和螺母用沉頭孔直徑.制造尺寸
| Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
|
| DIN 9841-1980
| 沖壓工具用的帶內六角套筒頭有肩螺釘
| Hexagon socket head shoulder screw for press tools
|
| DIN EN 14512-2006
| 危險貨物運輸用容器.液體化學物品運輸?shù)娜萜髟O(shè)備.繞軸旋轉螺釘?shù)你q鏈人孔蓋和頸環
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts; English version of DIN EN 14512:2006-10
|
| DIN EN 20225-1992
| 緊固件.螺釘、螺柱和螺母.尺寸符號和標示(ISO 225-83)
| Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991
|
| DIN EN 20273-1992
| 緊固件.螺栓和螺釘?shù)拈g隙孔(ISO 273-1979)
| Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
|
| DIN EN 20898-7-1995
| 緊固件的機械性能.第7部分:公稱直徑為 1 mm - 10 mm 的螺栓和螺釘?shù)呐ちυ囼灪妥钚∨ぞ?(ISO 898-7:1992);
| Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
|
| DIN EN 2363-1989
| 航空航天.操縱鋼索松緊螺絲扣的固定夾子.尺寸
| Aerospace series; locking clips for turnbuckles of control cables; dimensions
|
| DIN EN 24766-1992
| 平端槽頭止動螺釘
| Slotted set screws with flat point (ISO 4766:1983); german version EN 24766:1992
|
| DIN EN 2569-1992
| 航空航天系列.操縱鋼纜接頭和松緊螺絲扣.技術規范
| Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991
|
| DIN EN 2583-1997
| 航空航天系列.耐高溫鎳基合金(因科鎳合金718)MJ螺紋螺釘.等級:1275MPa(室溫)/650℃.交貨技術條件
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997
|
| DIN EN 26157-1-1991
| 緊固件.表面缺陷.符合一般要求的螺栓、螺釘和螺柱(ISO 6157-1-88)
| Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
|
| DIN EN 26157-3-1991
| 緊固件.表面缺陷.特殊要求用螺栓、螺釘和螺柱
| Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
|
| DIN EN 2649-1995
| 航空航天系列.鍍鎘合金鋼全螺紋帶槽大柱頭螺釘.等級:900MPa(室溫下)/235°C; 德文版本 EN 2649:1995
| Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995
|
| DIN EN 2650-1996
| 航空航天.鈍化耐蝕鋼螺紋長度接近頂部帶槽平頭螺絲.等級:600 MPa(室溫)/425℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996
|
| DIN EN 2651-1996
| 航空航天系列.鍍錫黃銅制螺紋接近頂部帶槽平頭螺絲.等級:300MPa(室溫)/80℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996
|
| DIN EN 2652-1997
| 航空航天系列.鍍鎘合金制螺紋接近頂部帶槽的100度沉頭螺絲.等級900MPa(室溫)/235℃
| Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997
|
| DIN EN 2653-1996
| 航空航天系列.鈍化耐蝕鋼螺紋長度接近頂部帶槽100度沉頭螺絲.等級:600 MPa(室溫)/425℃
| Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996
|
| DIN EN 2654-1996
| 航空航天系列.鍍錫黃銅螺紋接近頂部帶槽100度沉頭螺絲.等級:300MPa(室溫)/80℃
| Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996
|
| DIN EN 27434-1992
| 錐形端槽頭止動螺釘
| Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
|
| DIN EN 27435-1992
| 長圓柱末端的槽頭止動螺釘
| Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
|
| DIN EN 27436-1992
| 凹端槽頭止動螺釘
| Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
|
| DIN EN 27721-1992
| 沉頭螺釘.沉頭形狀和測量(ISO 7721-1983)
| Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
|
| DIN EN 2870-1996
| 航空航天系列.鈦合金陽極化MoS2潤滑十二角緊配合螺絲.等級 1100MPa(室溫)/315℃
| Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996
|
| DIN EN 2874-1996
| 航空航天系列.鈍化耐高溫鎳基合金中長螺紋十二角緊配合螺絲.等級 1550MPa(室溫)/315℃
| Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996
|
| DIN EN 28839-1991
| 緊固件的機械性能.有色金屬制造的螺栓、螺釘、螺柱和螺母
| Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
|
| DIN EN 2884-1996
| 航空航天系列.MoS2潤滑陽極化鈦合金短螺紋帶翼型十字槽平頭螺釘.等級:1100MPa(室溫)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996
|
| DIN EN 2885-1996
| 航空航天系列.鍍鎘合金鋼短螺紋帶翼型十字槽平頭螺釘.等級:900MPa(室下)/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996
|
| DIN EN 2886-1996
| 航空航天系列.鍍鉻合金鋼短螺紋帶翼形十字槽的平頭緊配合螺絲.等級:900MPa/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 °C; German version EN 2886:1996
|
| DIN EN 2888-2007
| 航空航天系列.鈍化耐腐蝕短螺紋標準桿粗公差普通六角頭米制螺釘.等級:600MPa(室溫下)/425℃
| Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006
|
| DIN EN 2889-2007
| 航空航天系列.鍍鎘合金鋼短螺紋粗公差普通六角頭米制螺釘.等級:900MPa(室溫下)/235℃;德文和英文版本 EN 28
| Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2889:2006
|
| DIN EN 2897-1996
| 航空航天系列.鍍鉻合金鋼短螺紋帶翼形十字槽的平頭緊配合螺絲.等級:1100MPa/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 °C; German version EN 2897:1996
|
| DIN EN 2926-1996
| 航空航天系列.耐高溫鋼FE-FA92HT(A286制鍍銀長螺紋細螺桿十二角螺絲釘.等級:900 Mpa(室溫)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2926:1996
|
| DIN EN 2927-1996
| 航空航天系列.耐高溫鎳基合金NI-P100HT(因康鎳 718)制長螺紋細螺桿十二角螺絲釘.等級:1275 Mpa(室溫)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996
|
| DIN EN 2928-1996
| 航空航天系列.耐高溫鎳基合金NI-P100HT(因康鎳 718)鍍銀長螺紋細螺桿十二角螺絲釘.等級:1275 Mpa(室溫)/650
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2928:1996
|
| DIN EN 2929-1996
| 航空航天系列.耐高溫鎳基合金NI-P100HT(因康鎳 718)制長螺紋細螺桿十二角螺絲釘.等級:1210 Mpa(室溫)/730℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2929:1996
|
| DIN EN 2930-1996
| 航空航天系列.耐高溫鎳基合金NI-P101HT(Waspaloy 一種耐高溫?zé)徭嚮辖?鍍銀長螺紋細螺桿十二角螺絲釘.等級
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 °C; German version EN 2930:1996
|
| DIN EN 2932-1996
| 航空航天系列.耐高溫鋼FE-PA92HT(A286)鍍銀長螺紋細螺桿T字頭螺絲釘.等級:900 Mpa(室溫)/650℃
| Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996
|
| DIN EN 2937-1994
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 全螺紋六角頭螺釘.等級:900 MPa (室溫)攝氏 650 度; 德文版本 EN 2
| Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994
|
| DIN EN 2938-1995
| 航空航天系列.鍍銀耐高溫鋼(FE-PA92HT(A286)全螺紋六角頭螺釘.等級:900MPa(室溫)/650℃; 德文版本 EN 2938:
| Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995
|
| DIN EN 2939-1994
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 全螺紋翼型十字槽 100 度沉頭螺釘.等級:900 MPa (室溫)攝氏 650 度
| Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994
|
| DIN EN 2940-1995
| 航空航天系列.鍍銀耐高溫鋼FE-PA92HT(A286)全螺紋偏置十字槽100度沉頭螺釘.等級:900 MPa(室溫)/650℃; 德文
| Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2940:1995
|
| DIN EN 3006-1994
| 航空航天系列.耐高溫鋼 FE-PA92HT(A286) 輕柄長螺紋六角頭螺釘.等級:900MPa (溫度) 攝氏 650 度; 德文版本
| Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994
|
| DIN EN 3007-1996
| 航空和航天.耐高溫鋼FE-PA92HT(A286)制鍍銀長螺紋細桿六角螺絲釘.等級900MPa(室溫下)/650℃
| Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996
|
| DIN EN 3035-1996
| 航空航天系列.合金鋼鍍鎘短螺紋帶翼型十字槽的100度沉頭配合螺釘.等級:1100MPa(室溫)/235℃
| Aerospace series - 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996
|
| DIN EN 3037-1996
| 航空航天系列.鈦合金鋼陽極處理MoS<2>鍛造短螺紋帶翼型十字槽平頭配合螺釘.等級:1100MPa(室溫)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS<(Index)2> lubricated - Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996
|
| DIN EN 3038-1996
| 航空航天系列.耐蝕耐高溫鋼鈍化處理短螺紋帶翼型十字槽的平頭配合螺釘.等級:1100MPa(室溫)/425℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3038:1996
|
| DIN EN 320-1993
| 纖維板.螺釘軸向拔出力測定
| Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993
|
| DIN EN 3218-001-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第001部分:技術規范
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 001: Technical specification; German and English version EN 3218-001:2006
|
| DIN EN 3218-002-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第002部分:性能和接觸方式規范
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements; German and English version EN 3218-002:2006
|
| DIN EN 3218-005-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第005部分:不可拆卸的尺寸為22的焊式接觸件插頭.產品標準
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-005:2006
|
| DIN EN 3218-006-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第006部分:不可拆卸的尺寸為22的焊式接觸件插座.產品標準
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-006:2006
|
| DIN EN 3218-007-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第007部分:后部抽取式尺寸為20的卷曲觸點插頭.產品標準
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 007: Plug with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-007:2006
|
| DIN EN 3218-008-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第008部分:后部抽取式尺寸為20的卷曲觸點插座.產品標準
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-008:2006
|
| DIN EN 3218-009-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第009部分:EN 3218-005和EN 3218-007連接器的防護罩.產品標準
| Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Product standard; German and English version EN 3218-009:2006
|
| DIN EN 3218-010-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第010部分:EN 3218-006和EN 3218-008連接器的防護罩.產品標準
| Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard; German and English version EN 3218-010:2006
|
| DIN EN 3218-011-2006
| 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第011部分:EN EN 3218-005至EN 3218-008連接器的插入萃取工具.
| Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Product standard; German and English version EN 3218-011:2006
|
| DIN EN 3303-1997
| 航空航天系列.鍍鎘合金鋼中等螺紋長度內六角圓柱形螺釘.等級:1100MPa(室溫)/235℃
| Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997
|
| DIN EN 3304-1996
| 航空航天系列.鈦合金陽極處理MoS<2>鍛造短螺紋帶翼型十字槽帶小頭100度沉頭配合螺釘.等級:1100MPa(室溫)/31
| Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3304:1996
|
| DIN EN 3305-1996
| 航空航天系列.合金鋼鍍鎘短螺紋帶翼型十字槽帶小頭100度沉頭配合螺釘.等級:1100MPa(室溫)/235℃
| Aerospace series - Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996
|
| DIN EN 3306-1996
| 航空航天系列.鈦合金陽極化MoS2潤滑短螺紋接近頂點帶翼形十字槽的100度沉頭螺絲.等級: 1100MPa/315℃
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996
|
| DIN EN 3307-1996
| 航空航天系列.鈦合金陽極處理MoS<2>鍛造螺紋接近根部帶翼型十字槽平頭螺釘.等級:1100MPa(室溫)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3307:1996
|
| DIN EN 3308-1996
| 航空航天系列.鈦合金陽極化MoS2潤滑螺紋接近頂點的六角螺絲.等級:1100MPa/315℃
| Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996
|
| DIN EN 3381-1996
| 航空航天系列.鈦陽極處理MoS<2>鍛造短螺紋帶翼型十字槽100度沉頭配合螺釘.等級:1100MPa(室溫)/315℃
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3381:1996
|
| DIN EN 3543-1997
| 航空航天系列.鈍化耐蝕耐高溫鋼短螺紋帶翼形十字槽100度沉頭緊配合螺絲.等級:1100MPa/425℃
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3543:1997
|
| DIN EN 3725-2005
| 航空航天系列.MoS2涂覆的陽極化處理的鈦合金TI-P64001制長螺紋標準桿六凸角凹口盤頭螺釘.強度等級:1100 MPa
| Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004
|
| DIN EN 3740-1996
| 航空航天系列.鈦合金陽極處理MoS<2>鍛造短螺紋小頭六角配合螺釘.等級:1100MPa(室溫)/315℃
| Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3740:1996
|
| DIN EN 3759-1996
| 航空航天系列.耐蝕耐高溫鋼鈍化螺紋接近根部帶翼型十字槽平頭螺釘.等級:1100MPa(室溫)/425℃
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3759:1996
|
| DIN EN 3760-1996
| 航空航天系列.耐蝕耐高溫鋼鈍化螺紋接近根部帶翼型十字槽100度沉頭螺釘.等級:1100MPa(室溫)/425℃
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3760:1996
|
| DIN EN 3820-2007
| 航空航天系列.MoS2潤滑的陽極化鈦合金短螺紋標準桿粗公差普通六角頭米制螺釘.等級:1100MPa(室溫下)/315℃
| Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2006
|
| DIN EN 4304-2007
| 航空航天系列.鈍化防腐蝕鋼制帶埋頭剪切螺釘用管狀管套(內壁厚度0.２5mm)
| Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4304:2005
|
| DIN EN 4306-2007
| 航空航天系列.鈍化防腐蝕鋼制帶埋頭拉緊螺釘用套筒(0.50 mm 壁厚)
| Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005
|
| DIN EN 4307-2007
| 航空航天系列.鈍化防腐蝕鋼制帶埋頭剪切螺釘用管狀管套(內壁厚度0.5mm)
| Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4307:2005
|
| DIN EN 4323-2006
| 航空航天系列.鈦合金TI-P64001制的六瓣凹槽、全桿螺紋、陽極氧化、鍍MoS2的100°沉頭螺釘.等級:900MPa(室溫
| Aerospace series - Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350 °C; German and English version EN 4323:2004
|
| DIN EN 4496 Berichtigung 1-2007
| 航空航天系列.帶有色熱鍍鋁覆層陽極氧化的鈦合金中短螺紋緊公差標準螺桿的100°標準沉頭偏置十字凹槽螺釘.
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005, Corrigenda to DIN EN 4496:2006-08; German and English version EN 4496:2005/AC:2006
|
| DIN EN 4496-2006
| 航空航天系列.十字凹槽、緊公差標準桿、短螺紋、100標準埋頭鈦合金陽極鋁覆層螺釘.分類:1100 MPa(環境溫度)
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005
|
| DIN EN 4497-2007
| 帶鋁有色涂層陽極電鍍鈦合金短螺紋緊公差標稱柄偏位十字凹槽平頭螺釘.分類:1100MPa(室溫)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005
|
| DIN EN 4509-2007
| 航空航天系列.帶有色熱鍍鋁覆層陽極氧化的鈦合金中螺紋延伸到螺頭100°沉頭偏置十字凹槽螺釘、米制系列.等
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4509:2006
|
| DIN EN 60169-25-1994
| 射頻連接器.第25部分:外導體直徑為13.56mm(0.534in)(TWHN型)雙內導體屏蔽平衡電纜配(3/4-20UNEF)雙極螺絲偶
| Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (type TWHN) (IEC 60169-25:1992); German version EN 60169-25:1993
|
| DIN EN 60745-2-2-2007
| 手持式電動工具.安全性.第2-2部分:電動螺絲刀和沖擊扳手的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches (IEC 60745-2-2:2003, modified); German version EN 60745-2-2:2003 + A11:2007
|
| DIN EN 60999-1-2000
| 連接裝置.銅導線.螺釘式和非螺釘式夾緊裝置安全性要求.第1部分:0.2mm以上至35mm(含35mm)導線
| Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 1:General requirements and particular requirements for clamping units for conductors 0,2 mm<(hoch)2> up to 35 mm<(hoch)2> (included) (IEC 60999-1:1999, modified); German version EN 60999-1:2000
|
| DIN EN 61076-2-101-2006
| 電子設備連接器.第2-101部分:圓形連接器.低壓設備用帶螺釘或彈簧鎖緊的M8圓形連接器、帶螺釘鎖緊的M12圓形
| Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications (IEC 61076-2-101:2003 + A1:2006); German version EN 61076-2-101:2003 + A1:2006
|
| DIN EN ISO 10510-1999
| 自攻螺釘和平墊圈組合件
| Tapping screw and washer assemblies with plain washers (ISO 10510:1999); German version EN ISO 10510:1999
|
| DIN EN ISO 10642-2004
| 內六角埋頭螺釘
| Hexagon socket countersunk head screws (ISO 10642:2004); German version EN ISO 10642:2004
|
| DIN EN ISO 10644-1998
| 帶普通墊圈的螺釘和墊圈組件.墊圈硬度級別為200HV和300HV
| Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:1998); German version EN ISO 10644:1998
|
| DIN EN ISO 10664-2005
| 螺栓和螺釘用內板擰的六角花形
| Hexalobular internal driving feature for bolts and screws (ISO 10664:2005); German version EN ISO 10664:2005
|
| DIN EN ISO 10666-2000
| 自鉆自攻螺釘.機械和功能特性
| Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999
|
| DIN EN ISO 10666-2000
| 自鉆自攻螺釘.機械和功能特性
| Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999
|
| DIN EN ISO 10669-1999
| 自攻螺釘和墊圈組合件用平墊圈.標準和大系列.產品等級A級
| Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999); German version EN ISO 10669:1999
|
| DIN EN ISO 10673-1998
| 螺釘和墊圈組件用普通墊圈.小系列、標準系列和大系列.產品等級A
| Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:1998); German version EN ISO 10673:1998
|
| DIN EN ISO 1207-1994
| 開槽圓柱頭螺釘.產品等級 A (ISO 1207:1992); 德文版本 EN ISO 1207:1994
| Slotted cheese head screws - Product grade A (ISO 1207:1992); German version EN ISO 1207:1994
|
| DIN EN ISO 14579-2002
| 圓柱頭內六角螺釘 (ISO 14579:2001); 德文版本 EN ISO 14579:2001
| Hexalobular socket head cap screws (ISO 14579:2001); German version EN ISO 14579:2001
|
| DIN EN ISO 14580 Berichtigung 1-2006
| 內六角圓頭螺釘.DIN EN ISO 14580-2002的技術勘誤
| Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001, Corrigenda to DIN EN ISO 14580:2002-05; German version EN ISO 14580:2001/AC:2005
|
| DIN EN ISO 14580-2002
| 凸頭內六角螺釘 (ISO 14580:2001); 德文版本 EN ISO 14580:2001
| Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001
|
| DIN EN ISO 14583 Berichtigung 1-2006
| 內六角盤頭螺釘.DIN EN ISO 14853-2002的技術勘誤
| Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001, Corrigenda to DIN EN ISO 14583:2002-05; German version EN ISO 14583:2001/AC:2005
|
| DIN EN ISO 14583-2002
| 平頭內六角螺釘 (ISO 14583:2001); 德文版本 EN ISO 14583:2001
| Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001
|
| DIN EN ISO 14584-2002
| 半埋頭內六角螺釘 (ISO 14584:2001); 德文版本 EN ISO 14584:2001
| Hexalobular socket raised countersunk head screws (ISO 14584:2001); German version EN ISO 14584:2001
|
| DIN EN ISO 14585 Berichtigung 1-2006
| 六角內孔平頭攻絲螺釘.DIN EN ISO 14585-2002的技術勘誤
| Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001, Corrigenda to DIN EN ISO 14585:2002-05; German version EN ISO 14585:2001/AC:2005
|
| DIN EN ISO 14585-2002
| 平頭內六角攻絲螺釘 (ISO 14585:2001);德文版本 EN ISO 14585:2001
| Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001
|
| DIN EN ISO 14586-2002
| 沉頭內六角攻絲螺釘 (ISO 14586:2001); 德文版本 EN ISO 14586:2001
| Hexalobular socket countersunk head tapping screws (ISO 14586:2001); German version EN ISO 14586:2001
|
| DIN EN ISO 14587-2002
| 內六角半沉頭(橢圓形)自攻螺釘
| Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001); German version EN ISO 14587:2001
|
| DIN EN ISO 1478-1999
| 自攻螺釘螺紋
| Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
|
| DIN EN ISO 15065-2005
| 頭部外形合乎ISO 7721標準的沉頭螺釘?shù)穆耦^孔
| Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005
|
| DIN EN ISO 15480-2000
| 六角凸緣頭自鉆自攻螺釘
| Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
|
| DIN EN ISO 15480-2000
| 六角凸緣頭自鉆自攻螺釘
| Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
|
| DIN EN ISO 15481-2000
| 十字槽盤頭自鉆自攻螺釘
| Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999
|
| DIN EN ISO 15481-2000
| 十字槽盤頭自鉆自攻螺釘
| Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999
|
| DIN EN ISO 15482-2000
| 十字槽沉頭自鉆自攻螺釘
| Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999
|
| DIN EN ISO 15483-2000
| 十字槽半沉頭自攻螺釘
| Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999
|
| DIN EN ISO 15483-2000
| 十字槽半沉頭自攻螺釘
| Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999
|
| DIN EN ISO 1580-1994
| 開槽平頭螺釘.產品等級 A (ISO 1580:1994); 德文版本 EN ISO 1580:1994
| Slotted pan head screws - Product grade A (ISO 1580:1994); German version EN ISO 1580:1994
|
| DIN EN ISO 2009-1994
| 開槽沉頭螺釘(通用頭).產品等級 A (ISO 2009:1994); 德文版本 EN ISO 2009:1994
| Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994); German version EN ISO 2009:1994
|
| DIN EN ISO 2010-1994
| 開槽半圓頭沉頭螺釘(通用頭).產品等級 A (ISO 2010:1994); 德文版本 EN ISO 2010:1994
| Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994); German version EN ISO 2010:1994
|
| DIN EN ISO 2342-2004
| 有柄開槽無頭螺釘
| Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003
|
| DIN EN ISO 2702-1994
| 熱處理鋼自攻螺釘.機械性能 (ISO 2702:1992); 德文版本 EN ISO 2702:1994
| Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992); German version EN ISO 2702:1994
|
| DIN EN ISO 3506-1-1998
| 耐蝕鋼緊固件的機械性能.第1部分:螺栓,螺釘和螺柱
| Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997
|
| DIN EN ISO 3506-3-1998
| 耐蝕鋼緊固件的機械特性.第3部分:不受拉應力的止動螺釘和類似的緊固件
| Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997
|
| DIN EN ISO 3506-4-2003
| 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘
| Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003
|
| DIN EN ISO 4017-2001
| 六角頭螺釘.產品等級A和B
| Hexagon head screws - Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000
|
| DIN EN ISO 4018-2001
| 六角頭螺釘.產品等級C
| Hexagon head screws - Product grade C (ISO 4018:1999); German version EN ISO 4018:2000
|
| DIN EN ISO 4026-2004
| 內六角平端緊定螺釘
| Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003
|
| DIN EN ISO 4027 Berichtigung 1-2007
| 圓錐體內六角槽固定螺釘
| Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003, Corrigenda to DIN EN ISO 4027:2004-05
|
| DIN EN ISO 4027-2004
| 內六角錐端緊定螺釘
| Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003
|
| DIN EN ISO 4028-2004
| 內六角圓柱端緊定螺釘
| Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003
|
| DIN EN ISO 4029-2004
| 內六角凹端緊定螺釘
| Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003
|
| DIN EN ISO 4757-1994
| 螺釘十字槽 (ISO 4757:1983); 德文版本 EN ISO 4757:1994
| Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994
|
| DIN EN ISO 4759-1-2001
| 緊固件公差.第1部分:螺栓、螺釘和墊圈和螺母.產品等級A、B和C
| Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
|
| DIN EN ISO 4759-3-2000
| 緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.產品等級A和C
| Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
|
| DIN EN ISO 4762-2004
| 內六角圓柱頭螺釘
| Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004
|
| DIN EN ISO 6789-2003
| 螺釘和螺母用裝配工具.手動轉矩工具.設計一致性試驗、質量一致性試驗和重新校準程序的要求和試驗方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003); German version EN ISO 6789:2003
|
| DIN EN ISO 7045-1994
| H型或Z型十字槽平頭螺釘.產品等級 A (ISO 7045:1994); 德文版本 EN ISO 7045:1994
| Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994); German version EN ISO 7045:1994
|
| DIN EN ISO 7046-1-1994
| 帶H型或Z型十字槽的沉頭螺釘(通用頭).產品等級 A.第1部分:4.8 特性級 (ISO 7046-1:1994); 德文版本 EN ISO
| Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Property class 4.8 (ISO 7046-1:1994); German version EN ISO 7046-1:1994
|
| DIN EN ISO 7046-2-1994
| 十字槽沉頭螺釘(通用頭).產品等級 A.第2部分:8.8 級特性鋼,不銹鋼和有色金屬 (ISO 7046-2:1990); 德文版本
| Cross recessed countersunk flat head screws (common head style) - Product grade A - Part 2: Steel of property class 8.8; stainless steel and non-ferrous metals (ISO 7046-2:1990); German version EN ISO 7046-2:1994
|
| DIN EN ISO 7047-1994
| 帶 H 型或 Z 型十字槽半圓頭沉頭螺釘(通用頭).產品等級 A (ISO 7047:1994); 德文版本 EN ISO 7047:1994
| Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994); German version EN ISO 7047:1994
|
| DIN EN ISO 7048-1998
| 帶十字槽的圓頭螺釘
| Cross recessed cheese head screws (ISO 7048:1998); German version EN ISO 7048:1998
|
| DIN EN ISO 7085-2000
| 表面淬火和回火的米制滾制螺紋螺釘?shù)臋C(jī)械和性能要求
| Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999); German version EN ISO 7085:1999
|
| DIN EN ISO 7380-2004
| 內六角平圓頭螺釘
| Heaxagon socket button head screws (ISO 7380:2004); German version EN ISO 7380:2004
|
| DIN EN ISO 7721-2-1994
| 沉頭螺釘.第2部分:十字槽槽深 (ISO 7721-2:1990); 德文版本 EN ISO 7721-2:1994
| Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994
|
| DIN EN ISO 8676-2001
| 米制細牙螺紋六角頭螺釘.產品等級A和B
| Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999); German version EN ISO 8676:2000
|
| DIN EN ISO 887-2006
| 通用米制螺栓、螺釘和螺母用的平墊圈.一般示意圖(ISO 887:2000 + Cor. 1:2006)
| Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07
|
| DIN EN ISO 898-1-1999
| 碳鋼和合金鋼制緊固件的機械性能.第1部分:螺栓,螺釘和螺柱
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
|
| DIN EN ISO 898-5 Berichtigung 1-2007
| 碳鋼和合金鋼制緊固件機械性能.第5部分:非拉伸應力條件下固定螺釘和類似緊固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998, Corrigenda to DIN EN ISO 898-5:1998-10
|
| DIN EN ISO 898-5-1998
| 碳鋼和合金鋼制緊固件的機械性能.第5部分:非拉伸應力條件下止動螺釘和類似的緊固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998
|
| DIN ISO 10045-1992
| 高山雪橇.緊固安裝部位.試驗螺釘?shù)囊? | Alpine skis; binding mounting area; requirements for test screws; identical with ISO 10045:1991
|
| DIN ISO 10228-1995
| 越野滑雪橇.固定松脫裝置安裝面.試驗螺釘?shù)囊? 等同采用 ISO 10228:1991
| Cross-country skis - Binding mounting area - Requirements for test screws; identical with ISO 10228:1991
|
| DIN ISO 1085-2007
| 螺釘和螺母用裝配工具.雙頭扳手.尺寸組配
| Assembly tools for screws and nuts - Double-ended wrenches - Size pairing (ISO 1085:1999) English version of DIN ISO 1085:2007-04
|
| DIN ISO 1479-1990
| 六角頭自攻螺釘
| Hexagon head tapping screws; identical with ISO 1479:1983
|
| DIN ISO 1481-1990
| 開槽的盤頭自攻螺釘
| Slotted pan head tapping screws; identical with ISO 1481:1983
|
| DIN ISO 1482-1990
| 開槽的沉頭( 扁平頭)自攻螺釘（通用頭型）
| Slotted countersunk (flat) head tapping screws (common head style); identical with ISO 1482:1983
|
| DIN ISO 1483-1990
| 開槽的半沉頭自攻螺釘(通用頭型)
| Slotted raised countersunk (oval) head tapping screws (common head style); identical with ISO 1483:1983
|
| DIN ISO 1711-1-2007
| 螺釘和螺母用裝配工具.技術規范.第1部分:手動扳手和套筒(ISO 1711-1-2007)
| Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2007)
|
| DIN ISO 1891-1979
| 緊固件.螺栓、螺釘、螺母和附件.術語和名稱
| Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
|
| DIN ISO 2351-1-2007
| 螺釘和螺母用裝配工具.電動螺絲起子.第1部分:一字槽螺絲用螺絲起子
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
|
| DIN ISO 2351-1-2007
| 螺釘和螺母用裝配工具.電動螺絲起子.第1部分:一字槽螺絲用螺絲起子
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
|
| DIN ISO 2351-2-2006
| 螺絲和螺母用裝配工具.機器操作旋具頭.第2部分:十字凹頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
|
| DIN ISO 2351-2-2006
| 螺絲和螺母用裝配工具.機器操作旋具頭.第2部分:十字凹頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
|
| DIN ISO 2351-3-2006
| 螺絲和螺母用裝配工具.機器操作旋具頭.第3部分:六角凹頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
|
| DIN ISO 2351-3-2006
| 螺絲和螺母用裝配工具.機器操作旋具頭.第3部分:六角凹頭螺釘用旋具頭
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
|
| DIN ISO 2380-1-2006
| 螺釘和螺母用裝配工具.一字槽螺釘?shù)男?第1部分:手動或者機動旋具工作部
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004)
|
| DIN ISO 2380-2-2006
| 螺絲和螺母用裝配工具.一字槽螺釘?shù)男?第2部分:手動旋具的一般要求、刀刃長度和標記
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
|
| DIN ISO 2380-2-2006
| 螺絲和螺母用裝配工具.一字槽螺釘?shù)男?第2部分:手動旋具的一般要求、刀刃長度和標記
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
|
| DIN ISO 262-1999
| ISO一般用途米制螺紋.螺釘、螺栓和螺母的選用尺寸（ISO 262-
| ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
|
| DIN ISO 2936-2001
| 螺釘和螺母用裝配工具.內六角螺釘扳手
| Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2001)
|
| DIN ISO 6004-1995
| 高山雪撬.雪撬固定松脫螺釘.要求; 等同采用 ISO 6004:1991
| Alpine skis - Ski bindings screws - Requirements; identical with ISO 6004:1991
|
| DIN ISO 6005-1995
| 高山雪撬.雪撬固定松脫螺釘.試驗方法; 等同采用 ISO 6005:1991
| Alpine skis - Ski bindings screws - Test methods; identical with ISO 6005:1991
|
| DIN ISO 7026-1992
| 道路車輛.B類S規格的針式噴嘴用的20、21和27型螺絲擰入式噴嘴架
| Road vehicles; screw-in injection nozzle holders types 20, 21 and 27 for pintle nozzle size "S", type "B"; identical with ISO 7026:1990
|
| DIN ISO 7049-1990
| 十字槽盤頭自攻螺釘
| Cross recessed pan head tapping screws; identical with ISO 7049:1983
|
| DIN ISO 7050-1990
| 十字槽沉頭（扁平頭）自攻螺釘(普通頭型)
| Cross recessed countersunk (flat) head tapping screws (common head style); identical with ISO 7050:1983
|
| DIN ISO 7051-1990
| 十字槽半沉頭（橢圓頭）自攻螺釘
| Cross recessed raised countersunk (oval) head tapping screws; identical with ISO 7051:1983
|
| DIN ISO 7794-1992
| 越野雪橇.雪橇緊固螺釘.要求
| Cross-country skis; ski binding screws; requirements; identical with ISO 7794:1991
|
| DIN ISO 7795-1995
| 越野雪橇.雪橇緊固螺釘.試驗方法; 等同采用 ISO 7795:1994
| Cross-country skis - Ski binding screws Test methods; identical with ISO 7795:1994
|
| DIN ISO 7913-1986
| 航空和航天.緊固件.螺栓和螺釘?shù)男螤詈臀恢霉?等同采用 ISO 7913-1986
| Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985
|
| DIN ISO 8764-1-2006
| 螺釘和螺母用裝配工具.十字槽頭螺釘用旋具.第1部分:驅動頭
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips (ISO 8764-1:2004)
|
| DIN ISO 8764-2-2006
| 螺絲和螺母用裝配工具.十字槽頭螺釘用旋具.第2部分:手動旋具的一般要求、刀刃長度和標記
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
|
| DIN ISO 8764-2-2006
| 螺絲和螺母用裝配工具.十字槽頭螺釘用旋具.第2部分:手動旋具的一般要求、刀刃長度和標記
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
|
| DIN ISO 885-2001
| 普通螺栓和螺釘.米制系列.端頭半徑
| General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000)
|
| DIN ISO 8992-2005
| 緊固件.螺栓、螺釘、螺柱和螺母的一般要求
| Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
|
| DIN ISO 9102-1992
| 道路車輛.壓燃式發動機.24.25.26型螺絲擰入式噴嘴座
| Road vehicles; compression-ignition engines; screw-in injection nozzle holders, types 24, 25 and 26; Identical with ISO 9102:1990
|
| DIN V 4001-11-1992
| 計算機輔助設計標準零件庫.第11部分:幾何和參數規范.用工具從外部驅動的有普通安裝面緊公差的平頭螺釘
| CAD standard parts library; specification of geometrie and parameters; head screws, with plain sitting surface, with drive external by tool
|
| DIN V 4001-12-1988
| 計算機輔助設計標準件文檔.第12部分:幾何和參數規范.沉頭螺釘
| CAD standard parts file; specification of geometry and parameters; countersunk head screws
|
| DIN V 4001-207-1991
| 計算機輔助設計標準件文檔.第207部分:幾何和參數規范.螺拴、固定螺絲和無頭螺釘
| CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws
|
| DIN V 4001-207-1991
| 計算機輔助設計標準件文檔.第207部分:幾何和參數規范.螺拴、固定螺絲和無頭螺釘
| CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws
|
| 編號 | 中文名稱 | 英文名稱 |
|---|