| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 175301-803-1999
| 詳細規范：矩形連接器 帶不可拆卸鎖定螺釘?shù)暮穸葹?.8mm的偏平接觸件
| Detail specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable
|
| EN 20273-1991
| 緊固件 螺栓和螺釘用通孔
| Fasteners; Clearance holes for bolts and screws (ISO 273:1979)
|
| EN 20898-7-1995
| 緊固件機械性能 第7部分：螺栓與螺釘?shù)呐ぞ卦囼?yàn)和最小扭矩公稱直徑1MM—10MM
| Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm (ISO 898-7:1992)
|
| EN 22568-1989
| 手用和機用圓螺絲板牙和手用板牙架
| Hand- and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988)
|
| EN 24766-1992
| 開槽平端緊定螺釘
| Slotted set screws with flat point (ISO 4766:1983)
|
| EN 26157-1-1991
| 緊固件 表面缺陷 第1部分：螺栓、螺釘和螺柱一般要求
| Fasteners; surface discontinuities; Part 1: Bolts, srews and studs for general requirements (ISO 6157-1:1988)
|
| EN 26157-3-1991
| 緊固件 表面缺陷 第3部分：螺栓、螺釘和螺柱的特殊要求
| Fasteners; surface discontinuities; part 3: bolts, srews and studs for special requirements (ISO 6157-3:1988)
|
| EN 2649-1995
| 航空航天系列 鍍鎘合金鋼頭全螺紋的盤形頭有槽螺釘 等級：900MPa(環境溫度)/235℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃
|
| EN 2650-1996
| 航空航天系列 鈍化耐蝕鋼制全螺紋盤形頭有槽螺釘 等級：600 MPa(環境溫度)/425℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃
|
| EN 2651-1996
| 航空航天系列 鍍錫黃銅全螺紋帶槽盤形頭螺釘 等級：380MPa(環境溫度)/80℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80℃
|
| EN 2652-1997
| 航空航天系列 鍍鎘合金鋼100°普通埋頭全螺紋有槽螺釘 等級：900MPa(環境溫度)/235℃
| Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification ： 900 MPa (at ambient temperature)/235℃
|
| EN 2653-1996
| 航空航天系列 鈍化耐蝕鋼制100度普通埋頭螺絲 等級：600 MPa(環境溫度)/425℃
| Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃
|
| EN 2654-1996
| 航空航天系列 鍍錫黃銅全螺紋帶槽100°普通埋頭螺釘 等級：380MPa(環境溫度)/ 80℃
| Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80℃
|
| EN 27434-1992
| 開槽錐端緊定螺釘
| Slotted set screws with cone point (ISO 7434:1983)
|
| EN 27435-1992
| 開槽長圓柱端緊定螺釘
| Slotted set screws with long dog point (ISO 7435:1983)
|
| EN 27436-1992
| 開槽凹端緊定螺釘
| Slotted set screws with cup point (ISO 7436:1983)
|
| EN 27721-1991
| 沉頭螺釘 頭部形狀和測量
| Countersunk head screws; Head configuration and gauging (ISO 7721:1983)
|
| EN 28839-1991
| 緊固件機械性能 有色金屬制造螺栓、螺釘、螺柱和螺母
| Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
|
| EN 2884-1996
| 航空航天系列 用MoS2潤滑陽極氧化鈦合金制短螺紋松公差普通柄偏置十字盤形頭凹槽螺釘 等級：1100 MPa (環
| Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 2885-1996
| 航空航天系列 鍍鎘合金鋼制短螺紋松公差退柄偏置十字盤頭凹槽螺釘 等級：900MPa(環境溫度)/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃
|
| EN 2886-1996
| 航空航天系列 鍍鎘合金鋼偏置十字凹槽緊公差普通柄短螺紋螺釘 等級： 900MPa(環境溫度)/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃
|
| EN 2897-1996
| 航空航天系列 鍍鎘合金鋼制盤頭偏置十字凹槽緊公差普通柄短螺紋螺釘 等級：1100MPa(環境溫度)/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ℃
|
| EN 2926-1996
| 航空航天系列 FE-FA92HT(A286)耐熱鋼制鍍銀長螺紋細柄雙六角頭螺釘 等級： 900 MPa(環境溫度)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 2927-1996
| 航空航天系列 NI-P100HT(Inconel 718)耐熱鎳基合金制長螺紋細柄雙六角頭螺釘 等級：1275 MPa(環境溫度)/6
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃
|
| EN 2928-1996
| 航空航天系列 NI-P100HT(Inconel 718)耐熱鎳基合金制鍍銀長螺紋細柄雙六角頭螺釘 等級：1275 MPa(環境溫
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃
|
| EN 2929-1996
| 航空航天系列 NI-P100HT(一種耐熱鎳基合金)耐熱鎳基合金制長螺紋細柄雙六角頭螺釘 等級：1210 MPa(環境溫
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃
|
| EN 2930-1996
| 航空航天系列 NI-P101HT(Waspaloy 一種耐高溫?zé)徭嚮辖?耐熱鎳基合金鍍銀長螺紋細柄雙六角頭螺釘 等級：
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃
|
| EN 2937-1994
| 航空航天系列 FE-PA92HT(A286)耐熱鋼全螺紋六角頭螺釘 等級：900MPa(環境溫度) 650℃
| Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 2938-1995
| 航空航天系列 鍍銀FE-PA92HT(A286)耐熱鋼制全螺紋六角頭螺釘 等級：900MPa(環境溫度)/650℃
| Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 2939-1994
| 航空航天系列 FE-PA92HT(A 286)耐熱鋼100度埋頭偏置十字凹槽全螺紋螺釘 等級：900MPa(環境溫度)/650C°
| Aerospace series - Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 2940-1995
| 航空航天系列 鍍銀FE-PA92HT(A286)耐熱鋼制全螺紋偏置十字凹槽100度沉頭螺釘 等級：900 MPa(環境溫度)/65
| Aerospace series - Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃
|
| EN 3007-1996
| 航空航天系列 鍍銀FE-PA92HT(A286)耐熱鋼制長螺紋細柄六角頭螺釘 等級：900MPa (環境溫度)/650℃
| Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silv0er plated - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 3035-1996
| 航空航天系列 合金鋼鍍鎘短螺紋緊公差普通柄偏置十字凹槽的100°標準埋頭螺釘 等級：1100MPa(環境溫度)/2
| Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃
|
| EN 3037-1996
| 航空航天系列 陽極氧化MoS2潤滑鈦合金短螺紋緊公差普通柄偏置十字凹槽盤頭螺釘 等級：1100MPa(環境溫度)/
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3038-1996
| 航空航天系列 鈍化耐熱耐腐蝕鋼制短螺紋緊公差普通柄偏置十字凹槽盤頭螺釘 等級：1100MPa(環境溫度)/425
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| EN 320-1993
| 纖維板 抗螺釘軸向拔出力的測定
| Fibreboards - Determination of resistance to axial withdrawal of screws
|
| EN 3303-1997
| 航空航天系列 鍍鎘合金鋼六角凹頭粗公差普通柄中等長度螺紋帽螺釘 等級：1100MPa(環境溫度)/235℃
| Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃
|
| EN 3304-1996
| 航空航天系列 氧極氧化鈦合金MoS2潤滑短螺紋緊公差普通柄偏置十字凹槽100°埋頭矮頭螺釘 等級：1100MPa(
| Aerospace series - Screws, 100°countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3305-1996
| 航空航天系列 鍍鎘合金鋼短螺紋緊公差普通柄偏置十字凹槽100°埋頭矮頭螺釘 等級：1100MPa(環境溫度)/235
| Aerospace series - Screws, 100°countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃
|
| EN 3306-1996
| 航空航天系列 陽極氧化MoS2潤滑鈦合金鋼制100度埋頭標準頭諞置十字凹槽全螺紋螺絲 等級：1100MPa(環境溫
| Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3307-1996
| 航空航天系列 陽極氧化鈦合金MoS2潤滑全螺紋偏置十字凹槽盤頭螺釘 等級：1100 MPa(環境溫度)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3308-1996
| 航空航天系列 陽極氧化MoS2潤滑鈦合金鋼制標準六角頭全螺紋螺絲 等級：1100MPa(環境溫度)/315℃
| Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ℃
|
| EN 3381-1996
| 航空航天系列 陽極氧化MoS2潤滑鈦金屬制100度埋頭標準頭偏置十字凹槽緊公差普通柄短螺紋螺釘 等級：1100M
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3543-1997
| 航空航天系列 鈍化耐熱及耐腐蝕鋼制100°埋頭標準頭偏置十字凹槽緊公差普通桿短螺紋螺釘 等級：1100MPa(
| Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| EN 3759-1996
| 航空航天系列 鈍化耐熱耐腐蝕鋼制全加螺紋的偏十字形槽盤頭螺釘 等級：1100 MPa(環境溫度)/425℃
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| EN 3760-1996
| 航空航天系列 鈍化耐熱耐腐蝕鋼制全螺紋的偏十字形槽100°埋頭標準頭螺釘 等級：1100MPa(環境溫度)/425℃
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| EN 4323-2003
| 航空航天系列 TI-P640001陽極氧化 MoS<(Index)2>涂層制鈦合金 １００°埋頭六角形凹槽全螺紋螺釘 等級
| Aerospace series - Screws, 100?countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350℃ / Note: To be replaced by prEN 4323 (2003-05).
|
| EN 60998-2-2-1993
| 家用和類似用途低壓電路連接器件 第2-2部分：作為帶有無螺絲型的夾緊器件的獨立單元的連接器件的特別要求
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:1991)
|
| EN 60999-2-2003
| 連接器件 電銅導體 有螺釘和無螺釘型的線夾裝置的安全要求 第2部分：35mm至300mm導線線夾裝置的特殊要求
| Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm<(hoch)2> up to 300 mm<(hoch)2> (included) (IEC 60999-2
|
| EN ISO 10510-1999
| 自攻螺釘和平墊圈組合件
| Tapping screw and washer assemblies with plain washers (ISO 10510:1999)
|
| EN ISO 10642-1997
| 內六角孔沉頭螺釘
| Hexagon socket countersunk head screws (ISO 10642:1997)
|
| EN ISO 10644-1998
| 螺釘和平墊圈組合件 墊圈硬度等級200HV和300HV
| Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:1998)
|
| EN ISO 10664-1999
| 螺栓和螺釘用內板擰的六角花形
| Hexalobular internal driving feature for bolts and screws (ISO 10664:1999)
|
| EN ISO 10666-1999
| 自鉆自攻螺釘 機械和功能性能
| Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999)
|
| EN ISO 10669-1999
| 自攻螺釘和墊圈組合件用平墊圈 標準和大系列 產品等級A級
| Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999)
|
| EN ISO 10673-1998
| 螺釘和墊圈組合件用平墊圈 小、標準和大系列 產品等級A級
| Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:1998)
|
| EN ISO 1207-1994
| 開槽圓柱螺釘 產品等級A級
| Slotted cheese head screws - Product grade A (ISO 1207:1992)
|
| EN ISO 14579-2001
| 內六角頭螺釘
| Hexalobular socket head cap screws (ISO 14579:2001)
|
| EN ISO 14580-2001
| 內六角圓頭螺釘
| Hexalobular socket cheese head screws (ISO 14580:2001)
|
| EN ISO 14583-2001
| 內六角大柱頭螺釘
| Hexalobular socket pan head screws (ISO 14583:2001)
|
| EN ISO 14584-2001
| 內六角半沉頭螺釘
| Hexalobular socket raised countersunk head screws (ISO 14584:2001)
|
| EN ISO 14585-2001
| 內六角大柱頭自攻螺釘
| Hexalobular socket pan head tapping screws (ISO 14585:2001)
|
| EN ISO 14586-2001
| 內六角沉頭自攻螺釘
| Hexalobular socket countersunk head tapping screws (ISO 14586:2001)
|
| EN ISO 14587-2001
| 內六角半沉頭(橢圓形)自攻螺釘
| Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001)
|
| EN ISO 1478-1999
| 自攻螺釘用螺紋
| Tapping screw thread (ISO 1478:1999)
|
| EN ISO 1479-1994
| 六角頭自攻螺釘
| Hexagon head tapping screws (ISO 1479:1983)
|
| EN ISO 1481-1994
| 開槽盤頭自攻螺釘
| Slotted pan head tapping screws (ISO 1481:1983)
|
| EN ISO 1482-1994
| 開槽沉頭自攻螺釘（通用頭型）
| Slotted countersunk (flat) head tapping screws (common head style) (ISO 1482:1983)
|
| EN ISO 1483-1994
| 開槽半沉頭自攻螺釘（通用頭型）
| Slotted raised countersunk (oval) head tapping screws (common head style) (ISO 1483:1983)
|
| EN ISO 15480-1999
| 六角凸緣頭自鉆自攻螺釘
| Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999)
|
| EN ISO 15481-1999
| 十字槽盤頭自鉆自攻螺釘
| Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
|
| EN ISO 15482-1999
| 十字槽沉頭自鉆自攻螺釘
| Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)
|
| EN ISO 15483-1999
| 十字槽半沉頭自鉆自攻螺釘
| Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)
|
| EN ISO 1580-1994
| 開槽盤頭螺釘 產品等級A級
| Slotted pan head screws - Product grade A (ISO 1580:1994)
|
| EN ISO 2009-1994
| 開槽沉頭螺釘(通用頭型) 產品等級A
| Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994)
|
| EN ISO 2010-1994
| 開槽半沉頭螺釘(通用頭型) 產品等級A
| Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994)
|
| EN ISO 2702-1994
| 熱處理鋼自攻螺釘 機械性能
| Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992)
|
| EN ISO 3506-1-1997
| 耐腐蝕不銹鋼緊固件的機械性能 第1部分：螺栓、螺釘和螺柱
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997)
|
| EN ISO 3506-3-1997
| 耐腐蝕不銹鋼緊固件的機械性能 第3部分：緊定螺釘及類似的不受應力的螺紋緊固件
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997)
|
| EN ISO 3506-4-2003
| 耐腐蝕不銹鋼緊固件的機械性能 第4部分：自攻螺釘
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003)
|
| EN ISO 4017-2000
| 六角頭螺釘 產品等級A和B級
| Hexagon head screws - Product grades A and B (ISO 4017:1999)
|
| EN ISO 4018-2000
| 六角頭螺釘 產品等級C級
| Hexagon head screws - Product grade C (ISO 4018:1999)
|
| EN ISO 4757-1994
| 螺釘用十字槽
| Cross recesses for screws (ISO 4757:1983)
|
| EN ISO 4759-1-2000
| 緊固件公差 第1部分：螺栓、螺釘、螺柱和螺母 產品等級A、B和C級
| Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; product grades A, B and C (ISO 4759-1:2000)
|
| EN ISO 4759-3-2000
| 緊固件公差 第3部分：螺栓、螺釘和螺母用平墊圈 產品等級A和C級
| Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C (ISO 4759-3:2000)
|
| EN ISO 4762-1997
| 內六角圓柱頭螺釘
| Hexagon socket head cap screws (ISO 4762:1997)
|
| EN ISO 6410-1-1996
| 技術制圖 螺釘和螺紋部件 第1部分：通用規范
| Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993)
|
| EN ISO 6410-2-1996
| 技術制圖 螺釘和螺紋部件 第2部分：螺蚊嵌鑲件
| Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993)
|
| EN ISO 6410-3-1996
| 技術制圖 螺釘和螺紋部件 第3部分：簡化表示
| Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:1993)
|
| EN ISO 6789-2003
| 螺釘和螺母裝配工具 手動扭矩工具 設計的一致性試驗、質量的一致性試驗和重新校準程序的條件和試驗方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)
|
| EN ISO 7045-1994
| Ｈ或Ｚ型十字槽盤頭螺釘 產品等級A級
| Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994)
|
| EN ISO 7046-1-1994
| Ｈ或Ｚ型十字槽沉頭(通用頭型)螺釘 產品等級A級 第1部分：性能等級 鋼4.8級
| Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:1994)
|
| EN ISO 7046-2-1994
| 十字槽沉頭(通用頭型)螺釘 產品等級A級 第2部分：性能等級 鋼8.8級、不銹鋼和有色金屬
| Cross recessed countersunk flat head screws (common head style) - Grade A - Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals (ISO 7046-2:1990)
|
| EN ISO 7047-1994
| Ｈ或Ｚ型十字槽半沉頭(通用頭型)螺釘 產品等級A級
| Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994)
|
| EN ISO 7048-1998
| 十字槽圓柱頭螺釘
| Cross recessed cheese head screws (ISO 7048:1998)
|
| EN ISO 7049-1994
| 十字槽盤頭自攻螺釘
| Cross recessed pan head tapping screws (ISO 7049:1983)
|
| EN ISO 7050-1994
| 十字槽沉頭(通用頭型)自攻螺釘
| Cross recessed countersunk (flat) head tapping screws (common head style) (ISO 7050:1983)
|
| EN ISO 7051-1994
| 十字槽半沉頭(通用頭型)自攻螺釘
| Cross recessed raised countersunk (oval) head tapping screws (ISO 7051:1983)
|
| EN ISO 7085-1999
| 表面淬硬并回火的米制自擠螺釘機械和工作性能要求
| Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999)
|
| EN ISO 7380-1997
| 內六角平圓頭螺釘
| Hexagon socket button head screws (ISO 7380:1997)
|
| EN ISO 7721-2-1994
| 沉頭螺釘 第2部分：十字槽插入深度
| Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
|
| EN ISO 8662-7-1997
| 便攜式手提動力工具 手柄振動測量 第7部分：具有沖擊、脈沖或棘輪作用力的扳手、螺絲刀和擰螺母機
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997)
|
| EN ISO 8676-2000
| 米制細牙六角頭螺釘 產品等級A和B級
| Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999)
|
| EN ISO 887-2000
| 米制普通螺栓、螺釘和螺母用平墊圈 總方案
| Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)
|
| EN ISO 898-1-1999
| 碳鋼和鑄鋼鑄造的緊固件機械性能 第1部分：螺栓、螺釘和螺柱
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999)
|
| EN ISO 898-5-1998
| 碳鋼和鑄鋼鑄造的緊固件機械性能 第5部分：緊定螺釘及類似的不受拉應力的螺紋緊固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses (ISO 898-5:1998)
|
| EN ISO 9173-1-1995
| 拔牙鉗 第1部分：螺釘和鉸鏈接合型
| Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991)
|
| prEN 14399-4-2002
| 預加載高強度結構螺釘 第4部分：HV系統 六角螺栓和螺母的裝配件
| High-strength structural bolting for preloading - Part 4: System HV; Hexagon bolt and nut assemblies
|
| prEN 14399-5-2002
| 預加載高強度結構螺釘 第5部分：HR系統用普通平墊圈
| High-strength structural bolting for preloading - Part 5: Plain washers for system HR
|
| prEN 14399-6-2002
| 預加載高強度結構螺釘 第6部分HR和HV系統用普通斜角墊圈
| High-strength structural bolting for preloading - Part 6: Plain chamfered washers for systems HR and HV
|
| prEN 2591-423-2001
| 航空航天系列 光電連接元件 試驗方法 第423部分：連接器背面附件螺絲強度 注與EN 2591-100結合使用
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 423: Connector rear accessories thread strength / Note: Applies in conjunction with EN 2591-100
|
| prEN 4072-1999
| 航空航天系列 鋁 IVD涂層鈦合金、100°埋頭標準頭偏十字凹槽緊公差普通柄短螺紋螺釘 等級：1100 MPa(環境
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4303-1999
| 航空航天系列 鈍化耐腐蝕鋼(0,25 mm 壁厚)制埋頭的拉緊螺釘用套筒
| Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
|
| prEN 4306-1999
| 航空航天系列 鈍化耐腐蝕鋼(0,50 mm 壁厚)、帶埋頭拉緊螺釘用套筒
| Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
|
| prEN 4496-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字形埋頭100度 標準頭螺釘 等級：1100 MPa (環
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4497-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字口錐形頭螺釘 等級：1100 MPa (環境溫度下)/31
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4499-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字口矮頭埋頭100度螺釘 等級：1100 MPa (環境溫
| Aerospace series - Screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4509-1999
| 航空航天系列 鋁涂層陽極氧化鈦合金全螺紋十字口埋頭100度 標準螺釘 等級：1100 MPa (環境溫度下)/315℃
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 60998-2-2-2003
| 家用和類似用途低壓電路連接器件 第２－２部分：作為帶有無螺絲型的夾緊器件的獨立單元的連接器件的特別要
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:2002, modified) / Note: Intended as replaceme
|
| 編號 | 中文名稱 | 英文名稱 |
|---|