| 編號 | 中文名稱 | 英文名稱 |
|---|
| NF B51-128-1993
| 纖維板.螺釘軸向抽出阻力的測定
| (FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).)
|
| NF B51-260-1972
| 木屑板.螺絲拔除試驗
| (PARTICLE BOARD. TEST FOR WITHDRAWAL OF SCREWS.)
|
| NF C20-115-1971
| 標定截面不超過2.5mm**2，線芯無特殊預加工的硬銅導線連接的無螺釘接線端
| (TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OF CONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTION NOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OF THE CONDUCTOR.)
|
| NF C20-116-1981
| 室外銅導線用螺釘絲端子
| (Terminals with screw campling for external copper conductors.)
|
| NF C60-002-1994
| 家用及類似用低壓電路用連接裝置.第2-2部分:不帶螺釘型夾件的分開的部件連接裝置的特別要求
| (Connecting devices for low voltage circuits for household and similar purposes. Part 2-2 : particular requirements for connecting devices as separate entities with screwless-type clamping units.)
|
| NF C83-403-803-2003
| 詳細規范:防松螺釘不可拆卸的厚度為0.8MM的帶扁平觸點的矩形連接器
| (Detail Specification : rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable.)
|
| NF C93-561-1981
| 電子元件.螺釘鎖定的小型同軸接頭.一般規定
| (Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.)
|
| NF C93-566-1981
| 電子元件.螺釘鎖定射頻用同軸接頭（ＫＮ系列）.一般規定
| (ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW COUPLING (TYPE KN). GENERAL REQUIREMENTS.)
|
| NF C93-578-1996
| 射頻連接件.第20部分:外導線內徑為13.56mm(0,534 in)同時帶有兩條內導線的屏蔽平衡電纜用雙頭螺釘(3/4-20統
| (Radio-frequency connectors. Part 25 : two-pole screw (3/4-20 unef) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type twhn).)
|
| NF E02-312-1981
| 鋼制規.螺絲孔莫氏錐環規
| (STEEL GAUGES. MORSE TAPER RING GAUGES.)
|
| NF E02-316-1981
| 鋼制規.螺絲孔５％錐度環規
| (STEEL GAUGES. METRIC TAPER RING GAUGES.)
|
| NF E03-152-1981
| 用極限量規檢驗螺紋.螺釘用螺紋規
| (Thread checking with limit gauges. Threaded gauges for screw.)
|
| NF E03-154-1970
| 公制三角螺紋.用極限規檢驗螺紋.螺釘和螺釘孔光滑度檢查器
| (THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWS AND NUTS.)
|
| NF E04-012-1-1996
| 技術制圖.螺釘和螺紋部件.第1部分:通用規范
| (Technical drawings. Screw threads and threaded parts. Part 1 : general conventions.)
|
| NF E04-012-2-1996
| 技術制圖.螺釘和螺紋部件.第2部分:螺紋嵌鑲件
| (TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART 2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-2).)
|
| NF E04-012-3-1996
| 技術制圖.螺釘和螺紋部件.第3部分:簡化表示
| (TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADED PARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEAN STANDARD EN ISO 6410-3).)
|
| NF E22-201-1992
| 滾珠螺釘.第1部分:詞匯和命名
| (Ball screws. Part 1 : vocabulary and designation.)
|
| NF E22-202-1992
| 滾珠螺釘.第2部分:公稱直徑和公稱引線.米制系列
| (Ball screws. Part 2 : nominal diameters and nominal leads. Metric series.)
|
| NF E22-203-1993
| 球端螺釘.第3部分:合格條件和合格試驗
| (Ball screws. Part 3 : acceptance conditions and acceptance tests.)
|
| NF E25-011-1992
| 緊固件的機械特性.由非亞鐵金屬制造的螺栓,螺釘,柱螺栓和螺母
| (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
|
| NF E25-018-2-1994
| 沉頭螺釘.第2部分:十字槽
| (CONTERSUNK FLAT HEAD SCREWS. PART 2 : PENETRATION DEPTHY OF CROSS RECESSES. (EUROPEAN STANDARD EN ISO 7721-2).)
|
| NF E25-021-1994
| 螺釘?shù)氖植?歐洲標準EN ISO 4757)
| (Cross recesses for screws.)
|
| NF E25-022-1-2001
| 緊固件公差.螺栓、螺釘、雙頭螺栓和螺母.第1部分:產品等級A、B及C
| (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.)
|
| NF E25-022-1987
| 緊固件.Ｆ級螺釘和螺帽公差（精密機械）.螺紋直徑1到3mm
| (FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3 MM.)
|
| NF E25-023-1992
| 緊固件.螺栓和螺釘?shù)淖杂沙叽缈? | (Fasteners. Clearance hole for bolts and screws.)
|
| NF E25-100-1-1999
| 碳鋼合金制成的緊固件的機械性能.第1部分:螺栓、螺釘和螺柱
| (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.)
|
| NF E25-100-3-1992
| 緊固件.表面不連續性.第1部分:一般要求的螺栓、螺釘和螺柱
| (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).)
|
| NF E25-100-4-1992
| 緊固件.表面不連續性.第3部分:特殊要求的螺栓、螺釘和螺柱
| (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).)
|
| NF E25-100-5-1998
| 碳鋼和不銹鋼制緊固件的機械性能.第5部分:不處在拉伸應力下的固定螺釘和類似螺紋緊固件
| (Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.)
|
| NF E25-100-6-1998
| 不銹鋼緊固件耐腐蝕的機械特性.螺栓,螺絲和雙端螺栓
| (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)
|
| NF E25-100-7-1995
| 緊固件的機械性能.第7部分:公稱直徑1-10mm的螺栓和螺釘?shù)呐ちυ囼?yàn)和最小扭矩
| (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
|
| NF E25-100-8-1998
| 不銹鋼緊固件耐腐蝕的機械特性.不低于拉伸應力下配套螺釘和類似緊固件
| (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.)
|
| NF E25-107-1983
| 金屬用螺釘.內部六葉埋頭.Ａ級.符號ＦＸ
| (SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.)
|
| NF E25-108-2001
| 半埋頭內六角螺釘
| (Hexalobular socket raised countersunk head screws.)
|
| NF E25-109-2001
| 平頭內六角螺釘
| (Hexalobular socket pan head screws.)
|
| NF E25-110-2001
| 圓柱頭內六角螺釘
| (Hexalobular socket head cap screws.)
|
| NF E25-111-2001
| 凸頭內六角螺釘
| (Hexalobular socket cheese head screws.)
|
| NF E25-114-2001
| 六角頭螺釘.產品等級A和B
| (Hexagon head bolts - Product grades A and B.)
|
| NF E25-115-2-2001
| 六角頭螺釘.產品等級C
| (Hexagon head screws - Product grade C.)
|
| NF E25-116-1983
| 金屬用螺釘.方頭.標準桿.A和B級.符號Q
| (Square head screws. Product grades A and B. Symbol Q.)
|
| NF E25-117-1983
| 金屬用螺釘.方頭.全螺紋.A和B級.符號Q
| (Square head screws. Product grades A and B. Symbol Q.)
|
| NF E25-118-1983
| 金屬用螺釘.方頭.C級.符號Q
| (Square head screws. Product grade C. Symbol Q.)
|
| NF E25-119-1-1994
| 帶有H型或Z型的十字槽沉頭螺釘(普通頭型).產品等級A.第1部分:性能類別4.8的鋼
| (Countersunk flat head screws (common head style) with type H or type Z cross recessed. Product grade A. Part 1 : steel of property class 4.8.)
|
| NF E25-119-2-1994
| 十字槽沉頭螺釘(一般頭形).等級A.第2部分:8.8類特性鋼,不銹鋼和有色金屬
| (Cross recessed countersunk flat head scews (common head style). Grade A. Part 2 : steel of property class 8.8, stainless steel and non-ferrous metals.)
|
| NF E25-120-1994
| 帶有H型或Z型的十字槽半沉頭螺釘(普通頭型).產品等級A
| (Countersunk raised head screws (common head style) with type H or type Z cross recessed. Product grade A.)
|
| NF E25-121-1994
| 帶有H型或Z型十字槽的平圓頭螺釘.產品等級A
| (Pan head screws with type H or type Z cross recess. Product grade A.)
|
| NF E25-122-1984
| 金屬用螺釘.稱作“POLIER“的Z十字槽寬圓頭.A級.符號RLZ
| (SCREWS. CROSS RECESSED MUSHROOM HEAD (POELIERS). PRODUCT GRADE A. SYMBOL RL Z.)
|
| NF E25-123-1994
| 一字槽沉頭螺釘(普通頭型).產品等級A
| (Slotted countersunk flat head screws (common head style). Product grade A.)
|
| NF E25-124-1994
| 一字槽半沉頭螺釘(普通頭型).產品等級A
| (Slotted raised countersunk head screws (common head style). Product grade A.)
|
| NF E25-126-1997
| 內六角圓頭螺釘
| (HEXAGON SOCKET BUTTON HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7380).)
|
| NF E25-128-1994
| 一字槽平圓頭螺釘.產品等級A
| (Slotted pan head screws. Product grade A.)
|
| NF E25-130-1986
| 加墊圈的金屬用螺釘.錐形光滑壓緊墊圈.Ａ級
| (SCREWS WITH CONICAL SPRING TIGHTENING WASHER. PRODUCT GRADE A.)
|
| NF E25-131-1986
| 加墊圈的金屬用螺釘.內齒錐形墊圈.Ａ級
| (SCREWS WITH CONICAL SPRING INTERNAL TOOTHED TIGHTENING WASHER. PRODUCT GRADE A.)
|
| NF E25-132-1986
| 加墊圈的金屬用螺釘.外齒墊圈.Ａ級
| (SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.)
|
| NF E25-133-1987
| 緊固件.螺桿千斤頂用的金屬螺釘.短六角頭長制動端螺釘.Ａ和Ｂ級.符號ＨＺ
| (Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.)
|
| NF E25-134-1987
| 緊固件.螺桿千斤頂用的金屬螺釘.短方頭短制動端螺釘.Ａ和Ｂ級.符號ＱＺ
| (Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.)
|
| NF E25-139-1987
| 緊固件.金屬用螺釘.Ｚ十字槽寬凸圓柱形頭.Ａ級.符號ＣＢＬＺＳ
| (FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. GRADE A. SYMBOL CBL ZS.)
|
| NF E25-142-1991
| 緊固件.電阻焊金屬螺釘.縮小頭
| (FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.)
|
| NF E25-149-1998
| 十字槽圓頭螺釘
| (CROSS RECESSED CHEESE HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7048).)
|
| NF E25-150-1998
| 帶平墊圈的螺釘和墊圈組件.墊圈強度等級為200 HV和300 HV.
| (Screw and washer assemblies with plain washers. Washer hardness classes 200 HV and 300 HV.)
|
| NF E25-151-2001
| 米制細牙螺紋的六角頭螺釘.產品等級A和B
| (Hexagon head screws with metric fine pitch thread - Product grades A and B.)
|
| NF E25-160-1992
| 平端開槽調整螺釘
| (SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).)
|
| NF E25-161-1992
| 錐端開槽調整螺釘
| (SLOTTED SET SCEWS WITH CONE POINT. (EUROPEAN STANDARD EN 27434).)
|
| NF E25-162-1992
| 長制動端開槽調整螺釘
| (SLOTTED SET SCREWS WITH LONG DOG POINT. (EUROPEAN STANDARD EN 27435).)
|
| NF E25-163-1992
| 蝶形端開槽調整螺釘
| (SLOTTED SET SCEWS WITH CUP POINT. (EUROPEAN STANDARD EN 27436).)
|
| NF E25-501-2000
| 緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.A級和C級
| (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.)
|
| NF E25-520-1998
| 螺絲和洗衣機組件用水平式洗衣機.小型,常規型和大型系列.A級產品
| (PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A. (EUROPEAN STANDARD EN ISO 10673).)
|
| NF E25-525-2000
| 通用米制螺栓、螺釘和螺母用平墊圈.一般示意圖
| (Plain washers for metric bolts, screws and nuts for general purposes - General plan.)
|
| NF E25-600-1984
| 緊固件.木螺釘系列標準
| (FASTENERS. WOOD SCREWS FAMILY STANDARD.)
|
| NF E25-601-1984
| 十字槽沉頭木螺釘.符號FZ
| (CROSS RECESSED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FZ.)
|
| NF E25-602-1984
| 十字槽沉頭木螺釘.符號FBZ
| (CROSS RECESSED RAISED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FBZ.)
|
| NF E25-603-1984
| 一字槽圓頭木螺釘.符號RZ
| (CROSS RECESSED ROUND HEAD WOOD SCREWS. SYMBOL RZ.)
|
| NF E25-604-1984
| 有槽沉頭木螺釘.符號FS
| (Slotted countersunk head wood screws. Symbol FS.)
|
| NF E25-605-1984
| 木螺絲.一字槽沉頭.FBS符號
| (Slotted raised countersunk head wood screws. Symbol FBS.)
|
| NF E25-609-1985
| 木螺釘.螺絲眼
| (WOODSCREWS. SCREW-EYES.)
|
| NF E25-609-1985
| 木螺釘.螺絲眼
| (WOODSCREWS. SCREW-EYES.)
|
| NF E25-610-1985
| 木螺釘.螺絲鉤
| (WOODSCREWS. SCREW-HOOKS.)
|
| NF E25-610-1985
| 木螺釘.螺絲鉤
| (WOODSCREWS. SCREW-HOOKS.)
|
| NF E25-611-1985
| 木螺釘.直角彎頭螺絲鉤
| (WOODSCREWS. SQUARE BEND SCREW HOOKS.)
|
| NF E25-611-1985
| 木螺釘.直角彎頭螺絲鉤
| (WOODSCREWS. SQUARE BEND SCREW HOOKS.)
|
| NF E25-650-1-1994
| 熱處理鋼自攻螺釘.機械性能
| (Heat-treated steel tapping screws. Mechanical properties.)
|
| NF E25-650-2-1999
| 自攻螺釘螺紋
| (Tapping screw thread.)
|
| NF E25-651-2003
| 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘
| (Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws.)
|
| NF E25-652-2001
| 沉頭內六角攻絲螺釘
| (Hexalobular socket countersunk head tapping screws.)
|
| NF E25-653-2001
| 半埋頭(橢圓形)內六角攻絲螺釘
| (Hexalobular socket raised countersunk (oval) head tapping screws.)
|
| NF E25-654-2001
| 平頭內六角攻絲螺釘
| (Hexalobular socket pan head tapping screws.)
|
| NF E25-655-1983
| 內六角圓頭自攻螺釘.符號RLX
| (ROUND HEAD TAPPING SCREWS WITH SIX LOBES RECESS. SYMBOL RLX .)
|
| NF E25-656-1994
| 十字槽沉頭自攻螺釘(普通頭型)
| (Cross recessed countersunk (flat) head tapping screws (common head style).)
|
| NF E25-657-1994
| 十字槽半沉頭橢圓頭自攻螺釘
| (Cross recessed raised countersunk (oval) head tapping screws.)
|
| NF E25-658-1994
| 十字槽平圓頭自攻螺釘
| (Cross recessed pan head tapping screws.)
|
| NF E25-659-1984
| 自攻螺釘.十字槽半沉頭.(`Poelier`).符號RLZ
| (TAPPING SCREWS. CROSS RECESSED MUSHROOM HEAD (“POELIER“). SYMBOL RL Z.)
|
| NF E25-664-1986
| 一字槽六角頭自攻螺釘.符號HS
| (HEXAGON SLOTTED HEAD TAPPING SCREWS. SYMBOL HS.)
|
| NF E25-666-1987
| 緊固件.自攻螺釘.Z形十字槽和一字槽平圓頭螺釘.符號CBL ZS
| (FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. SYMBOL CBL ZS.)
|
| NF E25-755-1997
| 非硬度鋼和奧斯特不銹鋼的內螺紋平行螺釘
| (Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.)
|
| NF E25-756-1997
| 金屬不銹鋼和硬化鋼的平行螺釘
| (Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).)
|
| NF E25-757-1997
| 非硬度鋼和奧斯特不銹鋼的內螺紋平行螺釘
| (Parallel pins with internal thread, of hardened steel and martensitic stainless steel.)
|
| NF E25-800-1-1994
| 緊固件.波紋鋼管用螺栓.第1部分:帶法蘭或不帶法蘭,帶尖或不帶尖的六角頭螺釘.產品等級A
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
|
| NF E25-800-2-1994
| 緊固件.波紋鋼管用螺栓.第2部分:帶尖或不帶尖的圓頭螺釘.產品等級A
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
|
| NF E25-851-1987
| 緊固件.滾制螺釘(ISO米制螺紋).特性
| (FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.)
|
| NF E27-163-1972
| 調整螺釘
| (ADJUSTING SCREW.)
|
| NF E27-164-1976
| 鎖緊螺釘?shù)膲|板
| (LOCKING SCREW.)
|
| NF E27-165-1976
| 鎖緊螺釘?shù)拇╀N
| (SLIDE FOR LOCKING SCREW.)
|
| NF E27-166-1976
| 滾花頭鎖緊螺釘
| (LOCKING SCREW WITH KNURLED KNOB.)
|
| NF E27-167-1976
| 星形手扭鎖緊螺釘
| (LOCKING SCREW WITH PALM KNOB.)
|
| NF E27-168-1976
| 四翼鎖緊螺釘
| (LOCKING SCREW WITH 4 ARMED KNOB.)
|
| NF E27-170-1974
| 通用滾花頭螺釘
| (GENERAL PURPOSE KNURLED THUMBS SCREWS.)
|
| NF E27-191-1983
| 緊固件.有肩固定螺釘
| (FASTENERS. SHOULDERED RETAINING SCREWS.)
|
| NF E27-214-1976
| 帶小提琴緊弦用的蝶形螺母鎖緊螺釘
| (LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.)
|
| NF E27-215-1976
| 帶六角螺母的鎖緊螺釘
| (LOCKING SCREWS WITH HEXAGON NUT.)
|
| NF E27-303-1968
| 有孔球頭螺釘
| (SPHERICAL HOLED HEAD SCREW.)
|
| NF E27-853-1989
| 通用金屬卡箍.帶型，無螺釘，不可重復使用
| (Metallic hose clamps for general purpose. Band type, without screws, non re-usable. Specifications.)
|
| NF E27-854-1982
| 通用金屬卡箍.帶型,無螺釘,可重復使用的銷釘卡箍或軸的卡箍
| (METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE,WITHOUT SCREWS,RE-USABLE,PIN OR AXLE CLAMPS.)
|
| NF E62-307-1977
| 機床構造標準部件.多軸頭.防護裝置.２８和３６臥式防護裝置.支架.行程止推螺釘
| (MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOP SCREW.)
|
| NF E62-519-2003
| 柱形扁柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).第1部分:刀柄驅動系統的尺寸
| (Tool chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tool - Part 1 : dimensions of the driving system of tool shanks.)
|
| NF E62-520-2003
| 柱形扁柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).帶7/24錐柄的夾頭尺寸
| (Tools chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tools - Dimensions of chucks with 7/24 taper shank.)
|
| NF E62-526-2003
| 帶7/24外圓錐和莫氏內圓錐縮徑套筒和連接螺釘
| (Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw.)
|
| NF E63-512-1983
| 鑄型和擠壓器材.金屬模型構件.止動螺釘
| (MOULDING AND EXTRUSION EQUIPMENT. METALLIC MOULDING ELEMENTS. LOCKING SCREWS.)
|
| NF E66-103-1993
| 機用螺絲錐和手動螺絲錐
| (Short machine taps and hand taps.)
|
| NF E66-107-2000
| 公稱直徑由M3-M10的長桿螺絲攻.由回縮的全直徑桿型螺絲攻
| (Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess.)
|
| NF E66-108-2000
| 公稱直徑由M3-M24和1/8-1 英寸的長桿螺絲攻.漸減型螺絲攻
| (Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps.)
|
| NF E66-120-1975
| 圓柱和錐形管螺紋手用螺絲錐
| (HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.)
|
| NF E66-150-1990
| ＩＳＯ公制螺紋的手用和機用圓螺絲板牙
| (Hand- An machine-operated circular screwing dies and hand-operated die stocks.)
|
| NF E66-153-1990
| 煤氣管道圓柱螺紋手用和機用圓螺絲板牙
| (Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)
|
| NF E74-303-2001
| 螺釘和螺母組裝工具.鍛造的和管形套筒扳手.頭部外形最大尺寸
| (Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.)
|
| NF E74-304-2001
| 螺釘和螺母裝配工具.雙頭開口扳手、雙頭環形扳手和多用扳手.端部最大寬度
| (Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches - Maximum widths of heads.)
|
| NF E74-305-2001
| 螺釘和螺母裝配工具.雙頭扳手.尺寸選配
| (Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.)
|
| NF E74-307-2001
| 螺釘和螺母用裝配工具.組合扳手.扳手長度和端口最大厚度
| (Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.)
|
| NF E74-310-2001
| 螺釘和螺母用裝配工具.工程用雙頭開口扳手.扳手長度和端口厚度
| (Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-311-2001
| 螺釘和螺母用裝配工具.雙頭平直套筒扳手和斜口套筒扳手.扳手長度和端口厚度
| (Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-313-2001
| 螺釘和螺母用裝配工具.雙頭深斜口套筒扳手和改進的斜口套筒扳手.扳手長度和端口厚度
| (Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-321-1998
| 螺釘和螺母用裝配工具.十字形套筒扳手.尺寸和扭矩試驗
| (ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.)
|
| NF E74-322-1972
| 螺釘螺帽緊固工具.齒條式扳手
| (ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.)
|
| NF E74-323-1972
| 螺釘螺帽緊固工具.開槽螺帽用單鉤扳手
| (ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES)
|
| NF E74-324-2001
| 螺釘和螺母用裝配工具.可調扳手
| (Assembly tools for screws and nuts - Adjustable wrenches.)
|
| NF E74-325-2003
| 螺釘和螺母用裝配工具.手動轉矩工具.設計一致性試驗、質量一致性試驗和重新校準程序的要求和試驗方法
| (Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.)
|
| NF E74-331-2003
| 螺釘和螺母用裝配工具.內六角扳手
| (Assembly tools for screws and nuts - Hexagon socket screw keys.)
|
| NF E74-351-2002
| 螺釘和螺母用裝配工具.一字槽頭螺釘用旋具.第2部分:手工操作旋具的一般要求、刀刃長度和標記
| (Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.)
|
| NF E74-352-1998
| 螺釘和螺母用裝配工具.槽螺釘用旋具.第1部分:手工及機械操作用的旋具頭
| (Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.)
|
| NF E74-353-1-2002
| 螺釘和螺母用裝配工具.機動旋轉頭.第1部分:一字槽螺釘旋具
| (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.)
|
| NF E74-353-2-2002
| 螺釘和螺母用裝配工具.機動旋轉頭.第2部分:十字槽螺釘旋具頭
| (Assembly tools for screws and nuts - Machine-operated screwdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.)
|
| NF E74-353-3-2002
| 螺釘和螺母用裝配工具.機動旋轉頭.第3部分:內六角螺釘用旋具頭
| (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws.)
|
| NF E74-354-2002
| 螺釘和螺母用裝配工具.螺旋棘輪螺釘旋具頭.尺寸
| (Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions.)
|
| NF E74-355-1993
| 十字槽頭螺釘用旋轉具.第1部分:旋具尖
| (SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.)
|
| NF E74-356-1993
| 十字槽頭螺釘用旋具.第2部分:手持式旋具的一般要求、旋具頭長度和標記
| (SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 : GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS.)
|
| NF E74-360-2001
| 螺釘和螺母用裝配工具.手動和機動螺絲刀的驅動端和連接部件.尺寸和扭矩試驗
| (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.)
|
| NF E74-360-2001
| 螺釘和螺母用裝配工具.手動和機動螺絲刀的驅動端和連接部件.尺寸和扭矩試驗
| (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.)
|
| NF E74-361-1997
| 螺釘和螺母用裝配工具.方形旋具.第1部分:手動套筒工具用方形旋具
| (Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.)
|
| NF E74-362-1997
| 螺釘和螺母用裝配工具.方形旋具.第2部分:電動套筒工具用方形旋具
| (Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.)
|
| NF E74-363-1-1997
| 螺釘和螺母用裝配工具.方形傳動套筒.第1部分:手動套筒.尺寸
| (Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.)
|
| NF E74-363-2-1997
| 螺釘和螺母用裝配工具.方形傳動套筒.第2部分:機動“沖擊“套筒.尺寸
| (Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.)
|
| NF E74-363-3-2001
| 螺釘和螺母用組合工具.方形驅動套筒.第3部分:機器驅動套筒(無沖擊).尺寸
| (Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (“non impact“) - Dimensions.)
|
| NF E74-365-1997
| 螺釘和螺母用裝配工具.手動方形傳動套筒扳手上的傳動件.尺寸和試驗
| (Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.)
|
| NF E74-366-1997
| 螺釘和螺母用裝配工具.手動方形傳動套筒扳手上的附件.尺寸和試驗
| (Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.)
|
| NF E74-367-1995
| 螺釘和螺母用裝配工具.機動插頭扳手的方塊傳動加長六角插頭
| (Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.)
|
| NF E74-381-1997
| 螺釘和螺母用裝配工具.技術規范.第1部分:手動扳手和套筒
| (Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.)
|
| NF E82-020-1984
| 模壓鍛造零件.拉緊裝置用燈的螺釘.規范
| (DROP FORGINS. EYEBOLTS FOR TURNBUCKLES. REQUIREMENTS.)
|
| NF F01-088-1971
| 鐵路運輸設備.帶有槽端頭和螺紋端頭的未鉆孔軸.頭部鉆孔的螺釘
| (RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH SLOTTED AND THREADED ENDS. SCREWS WITH DRILLED HEADS.)
|
| NF F03-004-1983
| 鐵路車輛.金屬螺釘. 沉頭和半沉頭. Ａ級. 符號Ｆ和ＦＢ
| (Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.)
|
| NF F03-005-1983
| 鐵路車輛.金屬螺釘. 圓柱頭和球面圓柱頭. Ａ級. 符號Ｃ和ＣＲ
| (Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.)
|
| NF F03-006-1983
| 鐵路車輛.開槽懦半沉頭螺釘一螺母. Ａ級. 符號ＦＢＰ
| (Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.)
|
| NF F03-016-1983
| 鐵路車輛.開槽沉頭螺釘, 螺母. Ａ級. ＦＰ
| (Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.)
|
| NF F10-404-1984
| 鐵路車輛.0.25MN的聯接螺釘
| (Railway transport equipment. Coupling screw of 0,25 mn.)
|
| NF F11-003-1970
| 鐵路車輛.手制動. 螺釘和螺母. 螺距和螺紋剖面. 螺釘傳動
| (RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS. PITCHES AND PROFILES. SCREW DRIVES.)
|
| NF F50-006-1998
| 鐵路固定設備.帶可變螺紋的枕木螺絲
| (Railway fixed equipment. Sleeper screws with variable thread.)
|
| NF F55-251-1991
| 鐵路固定設備.信號電路.連接和分段器材.螺釘連接部件
| (RAILWAY FIXED EQUIPMENT. SIGNALLING. CIRCUITS. CONNECTING AND BREAKING COMPONENTS. SCREW-TYPE TERMINAL BLOCKS.)
|
| NF F56-123-1980
| 鐵路固定設備.通訊和信號裝置架空線路用器材.直徑口毫米鍍鋅方頭木螺釘
| (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. GALVANIZED SQUARE HEAD WOOD SCREWS.)
|
| NF J41-465-1957
| 造船工業.“金士頓“閥門.螺釘零件
| (SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.)
|
| NF J46-126-1951
| 造船工業.空氣入口.手柄和緊固螺釘
| (SHIPBUILDING. VENTILATORS. HANDLE AND LOCKING SCREW.)
|
| NF L22-063-1970
| 用板手操作的螺母、螺釘和軸的間隙
| (CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.)
|
| NF L22-070-1976
| 螺釘?shù)腂NAE型十字槽
| (CROSS RECESS (B.N.A.E.).)
|
| NF L22-071-1976
| NFL ２２-０７０ 型螺釘十字槽用螺絲刀頭
| (SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)
|
| NF L22-071-1976
| NFL ２２-０７０ 型螺釘十字槽用螺絲刀頭
| (SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)
|
| NF L22-072-1991
| 航天建筑.螺絲.920型十字槽
| (Aerospace construction. Bolts and screws. 92 degrees cruciform recess.)
|
| NF L22-090-1966
| 修配用大直徑標準螺釘、銷和墊圈
| (STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.)
|
| NF L22-111-1975
| 無銷孔六角頭螺釘.國際單位制螺紋
| (Hexagon head bolts without split pin hole. Sim thread (rech.).)
|
| NF L22-112-1975
| 帶銷孔六角頭螺釘.國際單位制螺紋
| (Hexagon head bolts with split pin hole. Sim thread (rech.).)
|
| NF L22-121-1975
| 帶輕桿無鎖孔六角頭螺釘.國際單位制螺紋
| (Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).)
|
| NF L22-122-1975
| 帶輕桿有銷孔六角頭螺釘.國際單位米制螺紋
| (Hexagon head bolts with waisted shank with split pin hole. Sim thread.)
|
| NF L22-125-1985
| 六角頭承拉螺釘ISO 螺紋４h 類
| (Bolt, hexagonal head, for tensile application, . ISO thread 4H class.)
|
| NF L22-126-1985
| 帶鎖緊孔六角頭承拉螺釘.ISO螺紋４h 類
| (Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.)
|
| NF L22-127-1985
| 帶頸桿六角頭承拉螺釘.ISO螺 紋４h 類
| (Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.)
|
| NF L22-128-1985
| 帶頸桿有鎖緊孔六角頭承拉螺釘.ISO 螺紋４h 類
| (Bolt, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4H class.)
|
| NF L22-129-1985
| 帶銷孔六角頭承拉螺釘.ISO 螺紋４h 類
| (Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.)
|
| NF L22-134-1975
| 無銷孔六角頭槽制螺釘.國際單位制螺紋
| (Precision hexagon head bolts without split pin hole. Sim thread (rech.).)
|
| NF L22-135-1975
| 帶銷孔六角頭槽制螺釘.國際單位制螺紋
| (Precision hexagon head bolts with split pin hole. Sim thread (rech.).)
|
| NF L22-136-1984
| 通用六角頭螺釘短螺紋
| (Bolt, hexagonal head, current use, short thread.)
|
| NF L22-137-1984
| 帶鎖緊孔六角頭短螺紋螺釘
| (Bolt, hexagonal head, with locking hole, short thread.)
|
| NF L22-138-1984
| 精密六角頭短螺紋螺釘
| (Bolt, hexagonal head, close tolerance, short thread.)
|
| NF L22-139-1984
| 帶鎖緊孔精密頭角頭短螺紋螺釘
| (BOLT,HEXAGONAL HEAD,CLOSE TOLERANCE,WITH LOCKING HOLE,SHORT THREAD.)
|
| NF L22-140-1984
| 六角頭全螺紋螺釘
| (Bolt, hexagonal head, threaded to head.)
|
| NF L22-141-1984
| 有鎖緊孔方角頭全螺紋螺釘
| (Bolt, hexagonal head, with locking hole, threaded to head.)
|
| NF L22-142-1984
| 常用有銷孔六角頭螺釘
| (BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.)
|
| NF L22-145-1985
| 六角頭承拉螺釘.ISO螺紋4G類
| (Bolt, hexagonal head, for tensile application, ISO thread 4G class.)
|
| NF L22-146-1985
| 有鎖緊孔六角頭承拉螺釘.ISO螺紋4G類
| (Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4G class.)
|
| NF L22-147-1985
| 帶頸桿六角頭承拉螺釘.ISO螺紋4G類
| (Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4G class.)
|
| NF L22-148-1985
| 帶頸桿有銷緊孔六角頭承拉螺釘.ISO螺紋4G類
| (Bolts, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4G class.)
|
| NF L22-151-1975
| 開槽圓柱頭螺釘和緊固凸圓頭螺釘.國際單位制螺紋
| (Slotted and drilled cheese head screws. Sim thread (rech.).)
|
| NF L22-152-1975
| 開槽扁頭螺釘.國際單位米制螺紋
| (Slotted mushroom head screws. Sim thread (rech.).)
|
| NF L22-153-1975
| 90°埋頭開槽螺釘.國際單位米制螺紋
| (Slotted 90 degrees countersunk head screws. Sim thread (rech.).)
|
| NF L22-154-1975
| 120°半圓頭開槽埋頭螺釘.單際單位米制螺紋
| (Slotted raised 120 degrees countersunk head screws. Sim thread (rech.).)
|
| NF L22-156-1975
| 錐頂凸圓頭開槽螺釘.國際單位米制螺紋
| (Slotted raised cheese head screws with cone point. Sim thread (rech.).)
|
| NF L22-157-1975
| 錐頂扁頭開槽螺釘.國際單位米制螺紋
| (Slotted mushroom head screws with cone point. Sim thread (rech.).)
|
| NF L22-158-1975
| 錐頂90°埋頭開槽螺釘.國際單位米制螺紋
| (Slotted 90 degrees countersunk head screws with cone point. Sim thread (rech.).)
|
| NF L22-159-1975
| 錐頂120°半圓頭開槽埋頭螺釘.國際單位米制螺紋
| (Slotted raised 120 degrees countersunk head screws with cone point. Sim thread (rech.).)
|
| NF L22-161-1984
| 有NF L22-72十字槽的通用100°埋頭螺釘
| (Bolt, 100 degrees countersunk head, current use, nf L 22-072 cross recess.)
|
| NF L22-162-1984
| 有NF L22-072十字槽的精密100°全螺紋埋頭螺釘
| (Bolt, 100 degrees countersunk head, close tolerance, nf L 22-072 cross recess.)
|
| NF L22-163-1984
| 有NF L22-072十字槽的常用100°度全螺紋埋頭螺釘
| (Bolt, 100 degrees countersunk head, threaded to head, nf L 22-072 cross recess.)
|
| NF L22-167-1984
| 有NF L22-070十字槽的常用100°埋頭螺釘
| (Bolt, 100 degrees countersunk head, current use, nf L 22-070 cross recess.)
|
| NF L22-168-1984
| 有NF L22-070 十字槽的緊公差100°沉頭螺釘
| (BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-070,CROSS RECESS.)
|
| NF L22-169-1984
| 有 NF L22-070十字槽的100°全螺紋埋頭螺釘
| (BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L 22-070,CROSS RECESS.)
|
| NF L22-171-1984
| 有NF L22-072十字槽的常用半圓頭螺釘
| (Bolt, pan head, current use, nf L22-072 cross recess.)
|
| NF L22-173-1984
| 有NF L22-072十字槽全螺紋半圓頭螺釘
| (BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-072 CROSS RECESS.)
|
| NF L22-176-1984
| 有NF L22-072十字槽錐頂半圓頭非磁性螺釘
| (Bolt, pan head, amagnetic with cone point NF L 22-072 cross recess.)
|
| NF L22-177-1984
| 有NF L22-070十字槽常用半圓頭螺釘
| (Bolt, pan head, current use, nf L 22-070 cross recess.)
|
| NF L22-179-1984
| 有NF L22-070十字槽全螺紋半圓頭螺釘
| (BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-070 CROSS RECESS.)
|
| NF L22-181-1976
| 有BNAE十字槽扁頭螺釘.國際單位米制螺紋
| (MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
|
| NF L22-182-1976
| 有BNAE十字槽90°埋頭螺釘.國際單位米制螺紋
| (90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
|
| NF L22-183-1976
| 有BNAE十字槽90°埋頭螺釘.國際單位米制螺紋
| (RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
|
| NF L22-184-1976
| 有BNAE十字槽120°埋頭螺釘.國際單位米制螺紋
| (120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
|
| NF L22-186-1976
| 有BNAE十字槽錐頂扁頭螺釘.國際單位米制螺紋
| (MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
|
| NF L22-187-1976
| 有BNAE十字槽錐頂90°埋頭螺釘.國際單位米制螺紋
| (90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
|
| NF L22-188-1976
| 有BNAE十字槽錐頂120°埋頭半圓頭螺釘單國際單位制米螺紋
| (RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
|
| NF L22-189-1976
| 有BNAE十字槽錐頂120°埋頭螺釘.國際單位米制螺紋
| (120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
|
| NF L22-201-1984
| 短螺紋精密螺釘.六角頭.ISO螺紋
| (Bolt, hexagonal head, short thread, close tolerance. ISO thread.)
|
| NF L22-202-1984
| 短螺紋精密螺釘.帶鎖緊孔六角頭.ISO螺紋
| (Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.)
|
| NF L22-205-1984
| 有銷孔常用六角頭螺釘.ISO螺紋
| (Bolt, hexagonal head, with cotter pin hole, current use. ISO thread.)
|
| NF L22-206-1984
| 常用六角頭螺釘.ISO螺紋
| (Bolt, hexagonal head, current use. ISO thread.)
|
| NF L22-207-1984
| 帶緊鎖孔常用六角頭螺釘.ISO螺紋
| (Bolt, hexagonal head, with locking hole, current use. ISO thread.)
|
| NF L22-208-1984
| 全螺紋六角頭螺釘.ISO螺紋
| (Bolt, hexagonal head, threaded to head. ISO thread.)
|
| NF L22-209-1984
| 帶緊鎖孔全螺紋六角頭螺釘.ISO螺紋
| (Bolt, hexagonal head, with locking hole threaded to head. ISO thread.)
|
| NF L22-220-1984
| 帶緊鎖絲孔內六角圓柱頭螺釘.4H類ISO螺紋
| (Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4H class.)
|
| NF L22-221-1983
| 無緊鎖絲孔內六角圓柱頭螺釘.4H類ISO螺紋
| (HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 H CLASS.)
|
| NF L22-222-1984
| 帶緊鎖絲孔內六角圓柱頭螺釘.4G類ISO螺紋
| (Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4G class.)
|
| NF L22-223-1983
| 無緊鎖孔全六角圓柱頭螺釘.4G類ISO螺紋
| (HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.)
|
| NF L22-224-1984
| 帶緊鎖絲孔全六角圓柱頭全螺紋螺釘.4G類ISO螺紋
| (Hexagonal socket cylindrical head screw, threaded to head, with hole for lockwire. ISO thread 4 G class.)
|
| NF L22-225-1983
| 無緊鎖絲孔全六角圓柱頭全螺紋螺釘.4G類ISO螺紋
| (HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.)
|
| NF L22-236-1989
| 航空用螺栓螺母.十二角頭螺釘.使用溫度在高于235℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.)
|
| NF L22-237-1989
| 航空用螺栓螺母.帶鎖緊孔十二角頭螺釘.使用溫度在高于235℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.)
|
| NF L22-246-1989
| 航空用螺栓螺母.十二角頭螺釘.細螺距.使用溫度高于在２３５℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.)
|
| NF L22-247-1989
| 航空用螺檢螺母.十二角頭螺釘.細螺距帶鎖緊孔.使用溫度在高于２３５℃以上
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS. FINE PITCH.)
|
| NF L22-251-1968
| 航空用ISO螺紋螺拴螺母.AICMA十字槽“通用”１００°沉頭螺釘
| (GENERAL PURPOSE 100 DEGREES COUNTERSUNK HEAD SCREWS WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-252-1968
| 航空用螺拴螺母.短螺紋精密螺釘.AICMA十字槽１００°埋頭螺釘
| (PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,A.I.C.M.A. CROSS RECESS.)
|
| NF L22-256-1966
| 航空用螺拴螺母.AICMA十字槽全螺紋１００°埋頭螺釘.ISO螺紋
| (AIRCRAFT FASTENERS. 100 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED,A.I.C.M.A. CROSS RECESS.)
|
| NF L22-257-1982
| 航空用螺拴螺母.BNAE 十字槽“通用”１００°埋頭螺釘.ISO螺紋
| (General purpose 100 degrees countersunk head screws,B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-258-1967
| 航空用螺拴螺母.BNAE 十字槽１００°短螺紋精密埋頭螺釘
| (AIRCRAFT FASTENERS. PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,B.N.A.E. CROSS RECESS.)
|
| NF L22-259-1982
| 航空用螺拴螺母.BNAE 十字槽１００°全螺紋埋頭螺釘.ISO螺紋
| (100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-271-1966
| 航空用螺拴螺母.AICMA 十字槽半圓頭螺釘
| (AIRCRAFT FASTENERS. PAN HEAD SCREWS,WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-272-1966
| 航空用ISO螺紋螺拴螺母.AICMA 十字槽全螺紋半圓頭螺釘
| (AIRCRAFT FASTENERS. PAN HEAD SCREWS,FULLY THREADED,WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-273-1966
| 航空用螺拴螺母.十字槽錐頂半圓頭非磁性螺釘
| (AIRCRAFT FASTENERS. NON-MAGNETIC PAN HEAD SCREWS WITH TRUNCATED CONE POINT. CROSS RECESS.)
|
| NF L22-274-1982
| 航空用螺拴螺母.BNAE十字槽半圓頭螺釘.ISO螺紋
| (Pan head screws,B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-277-1968
| 航空用螺拴螺母.溫度在260℃以上用全螺紋緊旋圓柱頭螺釘
| (DRILLED CHEESE HEAD SCREWS,FULLY THREADED,FOR TEMPERATURES ABOVE 260 DEGREES C.)
|
| NF L22-291-1979
| 全螺紋開槽９０度埋頭螺釘.ISO螺紋
| (SLOTTED 90 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-292-1979
| 全螺紋開槽６０度埋頭螺釘.ISO螺紋
| (SLOTTED 60 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-293-1979
| 全螺紋開槽圓頭螺釘.ISO螺紋
| (SLOTTED CHEESE EHAD SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-296-1979
| 全螺紋開槽緊旋圓柱頭螺釘.ISO螺紋
| (SLOTTED AND DRILLED CHEESE HEAD SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-298-1979
| 全螺紋凹六角圓柱頭螺釘.ISO螺紋
| (HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-305-1977
| 無頭平頂凸六角螺釘.ISO螺紋
| (HEXAGON SOCKET SET SCREWS,FLAT POINT. ISO THREAD.)
|
| NF L22-306-1977
| 半制動端六角凹頭止動螺釘.ISO螺紋
| (HEXAGON SOCKET SET SCREWS,HALF DOG POINT. ISO THREAD.)
|
| NF L22-307-1977
| 無頭凹頂凹六角螺釘ISO螺紋
| (HEXAGON SOCKET SET SCREWS,CUP POINT. ISO THREAD.)
|
| NF L22-308-1977
| 無頭尖頂凹六角螺釘.ISO螺紋
| (HEXAGON SOCKET SET SCREWS,CONE POINT. ISO THREAD.)
|
| NF L22-309-1977
| 無頭截錐頂凹六角螺釘.ISO螺紋
| (HEXAGON SOCKET SET SCREWS,TRUNCATED CONE POINT. ISO THREAD.)
|
| NF L24-020-1989
| 航空和航天.1100MPa強度級和MJ螺紋合金鋼螺釘.供應品的規范
| (AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.)
|
| NF L24-025-1989
| 航天.突出頭合金鋼螺釘.1250MPa強度的等級和MJ螺紋.供應品的規范
| (AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.)
|
| NF L24-109-1997
| 航空航天系列.陽極化MOS2潤滑鈦合金制標準六角頭、螺紋頭螺絲.等級:1100MPA(室溫)/315℃(歐洲標準EN 3308)
| (AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).)
|
| NF L24-113-1996
| 航空航天系列.鍍銀FE-PA92HT(A286)耐高溫鋼制螺紋到底部的六角螺釘.分類:900MPa(室溫下)/650℃
| (AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2938).)
|
| NF L24-114-1994
| 航空和航天系列.耐熱鋼FE-PA92HT(A286)用100°埋頭螺釘,偏置式十字形凹口及螺紋頭.分類.900MPa(室溫)/650℃
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 CELSIUSGRADE. (NORM EUROPEAN STANDARD EN 2939).)
|
| NF L24-115-1996
| 航空航天系列.鍍銀耐熱鋼FE-PA92HT(A286)100°埋頭偏置式十字形凹口螺紋到底部的螺釘.分類.900MPa(室溫)/65
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM ECESS, THREADED TO HEAD, IN HEAT RESISTING TEEL E-PA92HT(A286),SILVERPLATED.CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2940).)
|
| NF L24-117-1996
| 航空和航天.耐高溫鋼FE-PA92HT(A286)制鍍銀長螺紋細桿六角螺絲釘.等級900MPa(室溫下)/650℃
| (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3007).)
|
| NF L24-130-1997
| 航空航天系列.合金鋼鍍鎘100度埋頭、槽頭、螺紋頭螺絲.等級:900MPA(室溫)/235℃(歐洲標準EN 2652)
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2652).)
|
| NF L24-131-1996
| 航空航天系列.鈍化耐腐蝕鋼100度標準埋頭、槽頭、螺紋頭螺絲.分類:600MPA(環境溫度)/425℃(歐洲標準EN 2653
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2653).)
|
| NF L24-132-1996
| 航空航天系列.鍍錫黃銅100度標準埋頭、槽頭、螺紋頭螺絲.分類:380MPA(環境溫度)/80℃(歐洲標準EN 2654)
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TMEPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2654).)
|
| NF L24-133-1997
| 航空和航天系列.100度通用沉頭,偏移十字槽,緊配合普通柄,短螺紋,鍍鎘,合金鋼制螺絲.等級:1100MPA(室溫下)/2
| ()
|
| NF L24-134-1997
| 航空和航天系列.100度減徑沉頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,MOS2潤滑,鈦合金制螺絲.等級:1100MP
| ()
|
| NF L24-135-1997
| 航空和航天系列.100度減徑沉頭,偏移十字槽,緊配合普通柄,短螺紋,鍍鎘,合金鋼制螺絲.等級:1100MPA(室溫下)/2
| ()
|
| NF L24-136-1997
| 航空和航天系列.陽極化MOS2潤滑鈦制100度標準埋頭偏移十字槽、螺紋頭螺絲.等級:1100MPA(室溫下)/315℃(歐洲
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3306).)
|
| NF L24-137-1997
| 航空和航天系列.100度通用沉頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,鈦制螺絲.等級:1100MPA(室溫下)/315
| ()
|
| NF L24-138-1997
| 航空和航天系列.鈍化耐熱耐腐蝕鋼制100度標準埋頭偏移十字槽緊公差標準柄短螺紋螺絲.等級:1100MPA(室溫下)/
| ()
|
| NF L24-139-1997
| 航空和航天系列.100度通用沉頭,偏移十字槽,螺紋到頂部,鈍化,高溫耐蝕鋼制螺絲.等級:1100MPA(室溫下)/425℃
| ()
|
| NF L24-161-1997
| 航空和航天系列.合金鋼鍍鎘矩形頂蓋六角形承口粗公差標準柄中等長度螺紋螺絲.等級:1100MPA(室溫下)/235℃(
| (AEROSPACE SERIES. SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3303).)
|
| NF L24-180-1996
| 航空航天系列.鈍化耐腐蝕鋼盤形頭、槽頭、螺紋頭螺絲.分類:600MPA(環境溫度)/425℃(歐洲標準EN 2650)
| (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2650).)
|
| NF L24-181-1996
| 航空航天系列.鍍錫黃銅盤形頭、槽頭、螺紋頭螺絲.分類:380MPA(環境溫度)/80℃(歐洲標準EN 2651)
| (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TEMPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2651).)
|
| NF L24-182-1996
| 航空和航天.用MoS2潤滑,陽極化,鈦合金制,短螺紋,帶翼型十字槽的平頭螺釘.等級:1100MPa(室溫下)/315℃
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).)
|
| NF L24-183-1996
| 航空和航天.鍍鎘,合金鋼制,短螺紋,帶翼型十字槽的平頭螺釘.等級:900MPa(室溫下)/235℃
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2885).)
|
| NF L24-184-1996
| 航空和航天系列.鍍鎘合金鋼制短螺紋緊公差標準柄帶翼型十字槽的盤形頭螺絲.分類:900MPa(環境溫度)/235℃(歐
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRICUFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2886).)
|
| NF L24-185-1996
| 航空和航天系列.鍍鎘合金鋼制短螺紋緊公差標準柄帶翼型十字槽的盤形頭螺絲.分類:1100MPa(環境溫度)/235℃(
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2897).)
|
| NF L24-186-1997
| 航空和航天系列.平頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,MOS2潤滑,鈦合金鋼制螺絲.等級:1100MPA(室溫
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).)
|
| NF L24-187-1997
| 航空和航天系列.平頭,偏移十字槽,緊配合普通柄,短螺紋,鈍化,高溫耐蝕鋼制螺絲.等級:1100MPA(室溫下)/425℃
| ()
|
| NF L24-188-1997
| 航空和航天系列.平頭,偏移十字槽,螺紋到頂部,陽極化,MOS2潤滑,鈦合金鋼制螺絲.等級:1100MPA(室溫下)/315℃
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).)
|
| NF L24-189-1997
| 航空和航天系列.平頭,偏移十字槽,螺紋到頂部,鈍化,高溫耐蝕鋼制螺絲.等級:1100MPA(室溫下)/425℃
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3759).)
|
| NF L24-212-1996
| 航空和航天.耐高溫鋼FE-FA92HT(A286)制鍍銀長螺紋細螺桿十二角螺絲釘.等級:900 Mpa(室溫外)/650℃
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-221-1996
| 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制長螺紋細螺桿十二角螺絲釘.等級:1275 Mpa(室溫外)/650℃
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-222-1996
| 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制鍍銀長螺紋細螺桿十二角螺絲釘.等級:1275 Mpa(環境溫度)
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-225-1996
| 航空航天.加高螺母用耐高溫鎳基合金NI-P101HT(WASPALOY)中長螺紋緊公差十二角螺絲釘.分類:1210Mpa(室溫)/73
| (Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-231-1996
| 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制長螺紋細螺桿十二角螺絲釘.等級:1210 Mpa(室溫外)/730℃
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-232-1996
| 航空和航天.耐高溫鎳基合金NI-P101HT(Waspaloy 一種耐高溫?zé)徭嚮辖?制鍍銀長螺紋細螺桿十二角螺絲釘.等級
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-382-1996
| 航空和航天.耐高溫鋼FE-PA92HT(A286)制鍍銀長螺紋細螺桿T字頭螺絲釘.等級:900 Mpa(室溫外)/650℃
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-383-1996
| 航空和航天.耐高溫鎳基合金NI-P100HT(INCONE/718)長螺紋細螺桿T字頭螺絲釘.分類:1275 Mpa(室溫下)/650℃
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-384-1996
| 航空和航天.耐高溫鎳基合金NI-P100HT(INCONE/718)鍍銀長螺紋細螺桿T字頭螺絲釘.分類:1275 Mpa(室溫下)/650
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-385-1996
| 航空和航天.耐高溫鎳基合金NI-P101HT(WASPALOY)長螺紋細螺桿T字頭螺絲釘.分類:1210 Mpa(室溫下)/730℃
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-386-1996
| 航空和航天.耐高溫鎳基合金NI-P101HT(WASPALOY)鍍銀長螺紋細螺桿T字頭螺絲釘.分類:1210 Mpa(室溫下)/730℃
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-675-1994
| 航空和航天系列.耐熱鋼FE-PA92HT用自鎖定螺釘體螺母.分類.1100MPa(室溫)/650℃
| (Aerospace series. Shank nuts, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L43-213-1973
| 環形接頭的雙外螺絲接頭
| (DOUBLE UNIONS FOR CYLINDRICAL UNION.)
|
| NF L43-586-1972
| 螺釘固定光滑接頭.ISO 螺紋剖面和公差
| (PLUG-IN UNIONS,TUBE END. ISO THREAD PROFILE AND TOLERANCES.)
|
| NF R13-107-1970
| 發電機電磁調節器.螺釘固定
| (ELECTROMAGNETIC REGULATORS FOR GENERATORS. SCREW MOUNTING.)
|
| NF R93-183-1980
| 電阻電焊鋼螺釘、螺栓和螺母機械特性
| (MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.)
|
| NF S52-707-1994
| 高山雪橇.雪橇緊固螺釘.要求
| (ALPINE SKIS. SKI BINDING SCREWS. REQUIREMENTS.)
|
| NF S52-712-1994
| 高山雪撬.雪撬緊定螺釘.試驗方法
| (Alpine skis. Ski binding srews. Test methods.)
|
| NF S52-724-1994
| 越野滑雪.雪橇捆扎螺釘.要求
| (CROSS-COUNTRY SKIS. SKI BINDING SCREWS. REQUIREMENTS.)
|
| NF S52-734-1994
| 高山滑雪.捆扎部位.試驗螺釘?shù)囊? | (ALPINE SKIS. BINDING MOUNTING AREA. REQUIREMENTS FOR TEST SCREWS.)
|
| NF S52-735-1994
| 越野滑雪.捆扎部位.試驗螺釘?shù)囊? | (CROSS-COUNTRY SKIS. BINDING MOUNTING AREA. REQUIREMENTS FOR TEST SCREWS.)
|
| NF S90-411-1988
| 外科醫療器械.外科植入物.不對稱螺紋和球形底座的接骨用金屬螺釘.尺寸
| (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. OSTEOSYNTHESIS METAL SCREWS WITH ASYMMETRICAL THREAD AND SPHERICAL UNDER-SURFACE. DIMENSIONS.)
|
| NF S90-414-1988
| 外科醫療器械.外科植入物.不對稱螺紋和球形底座接骨用不銹鋼螺絲.機械性能和試驗
| (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.)
|
| NF S90-421-1989
| 外科植入物.接骨用金屬螺釘.尺寸
| (Implants for surgery. Metal bone screws with conical under-surfaces. Dimensions.)
|
| NF S90-422-1989
| 外科植入物.接骨用金屬板.圓錐形螺絲用的鋁孔和擴孔
| (IMPLANTS FOR SURGERY. METAL BONE PLATES. HOLES AND SLOTS CORRESPONDING TO SCREWS WITH CONICAL UNDER-SURFACE.)
|
| NF S90-511-1973
| 外科醫療器械.矯形和假肢組件.帶凸耳的凸圓頭開槽全螺紋螺釘
| (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD. FULLY THREADED.)
|
| NF S90-512-1973
| 外科醫療器械.矯形和假肢組件.帶凸耳的平圓頭開槽合螺紋螺釘
| (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH FLAT SLOTTED CHEESEHEAD FULLY THREADED.)
|
| NF S90-513-1973
| 外科醫療器械.矯形和假肢組件.帶安裝邊的凸圓頭半螺紋連接螺釘
| (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD AND FLANGE,PARTLY THREADED.)
|
| NF S91-129-1996
| 拔牙鉗.第1部分:螺釘和鉸鏈接合型
| (Dental extraction forceps. Part 1 : screw and pin joint types.)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|