| 編號 | 中文名稱 | 英文名稱 |
|---|
| DL/T 682-1999
| 母線金具用沉頭螺釘
| ()
|
| FZ/T 90027-1991
| 裝螺栓螺釘用的沖孔尺寸
| ()
|
| FZ/T 90028-1991
| 軸上緊定螺釘用的孔尺寸
| ()
|
| FZ/T 90075-1995
| 軸上緊定螺釘用的平臺 尺寸
| ()
|
| GB 3883.2-2005
| 手持式電動工具的安全第二部分:螺絲刀和沖擊扳手的專用要求
| Safety of hand-held motor-operated electric tools Part 2:Particular requirements for screwdrivers and impact wrenches
|
| GB/T 100-1986
| 開槽沉頭木螺釘
| Slotted countersunk head wood screws
|
| GB/T 101-1986
| 開槽半沉頭木螺釘
| Slotted raised countersunk head wood screws
|
| GB/T 102-1986
| 六角頭木螺釘
| Hexagon head wood screws
|
| GB/T 10635-2003
| 螺釘旋具通用技術條件
| Screwdrivers--General technical requirements
|
| GB/T 13806.1-1992
| 精密機械用緊固件十字槽螺釘
| Fasteners for fine mechanics--Cross recessed screws
|
| GB/T 13806.2-1992
| 精密機械用緊固件十字槽自攻螺釘刮削端
| Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point
|
| GB/T 14210-1993
| 墻板自攻螺釘
| Dry wall screws
|
| GB/T 15856.1-2002
| 十字槽盤頭自鉆自攻螺釘
| Cross recessed pan head drilling screws with tapping screw thread
|
| GB/T 15856.2-2002
| 十字槽沉頭自鉆自攻螺釘
| Cross recessed countersunk head drilling screws
|
| GB/T 15856.3-2002
| 十字槽半沉頭自鉆自攻螺釘
| Cross recessed raised countersunk head drilling screws with tapping screw thread
|
| GB/T 15856.4-2002
| 六角法蘭面自鉆自攻螺釘
| Hexagon flange head drilling screws with tapping screw thread
|
| GB/T 15856.5-2002
| 六角凸緣自鉆自攻螺釘
| Hexagon washer head drilling screws
|
| GB/T 16824.1-1997
| 六角凸緣自攻螺釘
| Hexagon head tapping screws with collar
|
| GB/T 16824.2-1997
| 六角法蘭面自攻螺釘
| Hexagon flange head tapping screws
|
| GB/T 16938-1997
| 緊固件螺栓、螺釘、螺柱和螺母通用技術條件
| Fasteners--General requirements for bolts，screws，studs and nuts
|
| GB/T 2670.1-2004
| 內六角花形盤頭自攻螺釘
| Hexalobular socket pan head tapping screws
|
| GB/T 2670.2-2004
| 內六角花形沉頭自攻螺釘
| Hexalobular socket countersunk head tapping screws
|
| GB/T 2670.3-2004
| 內六角花形半沉頭自攻螺釘
| Hexalobular socket raised countersunk(oval)head tapping screws
|
| GB/T 2671.1-2004
| 內六角花形低圓柱頭螺釘
| Hexalobular socket cheese(short)head screws
|
| GB/T 2671.2-2004
| 內六角花形圓柱頭螺釘
| Hexalobular socket head cap screws
|
| GB/T 2672-2004
| 內六角花形盤頭螺釘
| Hexalobular socket pan head screws
|
| GB/T 2673-2007
| 內六角花形沉頭螺釘
| hexalobular socket countersunk head screws
|
| GB/T 2674-2004
| 內六角花形半沉頭螺釘
| Hexalobular socket raised countersunk head screws
|
| GB/T 3098.1-2000
| 緊固件機械性能螺栓、螺釘和螺柱
| Mechanical properties of fasteners--Bolts，screws and studs
|
| GB/T 3098.10-1993
| 緊固件機械性能有色金屬制造的螺栓、螺釘、螺柱和螺母
| Mechanical properties of fasteners--Bolts，screws，studs and nuts made of non-ferrous metals
|
| GB/T 3098.11-2002
| 緊固件機械性能自鉆自攻螺釘
| Mechanical properties of fasteners--Drilling screws with tapping screw thread
|
| GB/T 3098.13-1996
| 緊固件機械性能螺栓與螺釘?shù)呐ぞ卦囼?yàn)和破壞扭矩公稱直徑1～10mm
| Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm
|
| GB/T 3098.16-2000
| 緊固件機械性能不銹鋼緊定螺釘
| Mechanical properties of fasteners--Setscrews made of stainless-steel
|
| GB/T 3098.3-2000
| 緊固件機械性能緊定螺釘
| Mechanical properties of fasteners--Set screws
|
| GB/T 3098.5-2000
| 緊固件機械性能自攻螺釘
| Mechanical properties of fasteners--Tapping screws
|
| GB/T 3098.6-2000
| 緊固件機械性能不銹鋼螺栓、螺釘和螺柱
| Mechanical properties of fasteners--Bolts，screws and studs made of stainless-steel
|
| GB/T 3098.7-2000
| 緊固件機械性能自擠螺釘
| Mechanical properties of fasteners--Thread rolling screws
|
| GB/T 3099-1982
| 螺栓、螺釘、螺母及附件名詞術語
| Bolts，screws，nuts and accessories--Terminology and nomenclature
|
| GB/T 3103.1-2002
| 緊固件公差螺栓、螺釘、螺柱和螺母
| Tolerances for fasteners--Bolts，screws，studs and nuts
|
| GB/T 3103.2-1982
| 緊固件公差用于精密機械的螺栓、螺釘和螺母
| Tolerances for fasteners--Bolts，screws and nuts for fine mechanics
|
| GB/T 3105-2002
| 普通螺栓和螺釘頭下圓角半徑
| General purpose bolts and screws--Radii under the head
|
| GB/T 3106-1982
| 螺栓、螺釘和螺柱的公稱長度和普通螺栓的螺紋長度
| Bolts，screws and studs--Nominal lengths，and thread lengths for general purpose bolts
|
| GB/T 3229-2000
| 螺栓螺釘用裝配工具機動螺刀頭的六角傳動端
| Assembly tools for bolts and screws--Hexagon drive ends for machine-operated screw driver bits
|
| GB/T 4389-1995
| 螺釘與螺母的裝配工具雙頭呆扳手、雙頭梅花扳手、兩用扳手頭部外形的最大尺寸
| Assembly tool for screws and nuts--Open-end double-head engineers wrenches，doublehead box wrenches and combination wrenches--Maximum outside dimensions of heads
|
| GB/T 4625-1998
| 螺釘和螺母的裝配工具術語
| Assembly tools for screws and nuts--Nomenclature
|
| GB/T 5276-1985
| 緊固件螺栓、螺釘、螺柱及螺母尺寸代號和標注
| Fasteners--Bolts，screws，studs and nuts--Symbols and designations of dimensions
|
| GB/T 5277-1985
| 緊固件螺栓和螺釘通孔
| Fasteners--Clearance holes for bolts and screws
|
| GB/T 5279-1985
| 沉頭螺釘頭部形狀和測量
| Countersunk head screws--Head configuration and gauging
|
| GB/T 5279.2-1997
| 沉頭螺釘?shù)?部分:十字槽插入深度
| Countersunk flat head screws--Part 2:Penetration depth of cross recesses
|
| GB/T 5280-2002
| 自攻螺釘用螺紋
| Tapping screws thread
|
| GB/T 5281-1985
| 內六角圓柱頭軸肩螺釘
| Hexagon socket head shoulder screws
|
| GB/T 5282-1985
| 開槽盤頭自攻螺釘
| Slotted pan head tapping screws
|
| GB/T 5283-1985
| 開槽沉頭自攻螺釘
| Slotted countersunk head tapping screws
|
| GB/T 5284-1985
| 開槽半沉頭自攻螺釘
| Slotted raised countersunk head tapping screws
|
| GB/T 5285-1985
| 六角頭自攻螺釘
| Hexagon head tapping screws
|
| GB/T 5286-2001
| 螺栓、螺釘和螺母用平墊圈總方案
| Plain washers for bolts，screws and nuts--General plan
|
| GB/T 5358-1998
| 內六角花形螺釘旋具
| Hexagon spline screwdrivers
|
| GB/T 5779.1-2000
| 緊固件表面缺陷螺栓、螺釘和螺柱一般要求
| Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements
|
| GB/T 5779.3-2000
| 緊固件表面缺陷螺栓、螺釘和螺柱特殊要求
| Fasteners--Surface discontinuities--Bolts，screws and studs for special requirements
|
| GB/T 6188-2000
| 螺栓和螺釘用內六角花形
| Hexalobular internal driving feature for bolts and screws
|
| GB/T 65-2000
| 開槽圓柱頭螺釘
| Slotted cheese head screws
|
| GB/T 6559-1986
| 自攻鎖緊螺釘?shù)穆輻U粗牙普通螺紋系列
| Screw thread shanks for thread forming screw--Metric coarse thread series
|
| GB/T 6560-1986
| 十字槽盤頭自攻鎖緊螺釘
| Cross recessed pan head thread forming screws
|
| GB/T 6561-1986
| 十字槽沉頭自攻鎖緊螺釘
| Cross recessed countersunk head thread forming screws
|
| GB/T 6562-1986
| 十字槽半沉頭自攻鎖緊螺釘
| Cross recessed raised countersunk head threadforming screws
|
| GB/T 6563-1986
| 六角頭自攻鎖緊螺釘
| Hexagon head thread forming screws
|
| GB/T 6564-1986
| 內六角花形圓柱頭自攻鎖緊螺釘
| Hexagon lobular socket thread forming screws
|
| GB/T 67-2000
| 開槽盤頭螺釘
| Slotted pan head screws
|
| GB/T 68-2000
| 開槽沉頭螺釘
| Slotted countersunk flat head screws(common head style)
|
| GB/T 69-2000
| 開槽半沉頭螺釘
| Countersunk slotted raised head screws(common head style)
|
| GB/T 70.1-2000
| 內六角圓柱頭螺釘
| Hexagon socket head cap screws
|
| GB/T 70.2-2000
| 內六角平圓頭螺釘
| Hexagon socket button head screws
|
| GB/T 70.3-2000
| 內六角沉頭螺釘
| Hexagon socket countersunk head screws
|
| GB/T 71-1985
| 開槽錐端緊定螺釘
| Slotted set screws with cone point
|
| GB/T 72-1988
| 開槽錐端定位螺釘
| Slotted set screws with cone point
|
| GB/T 73-1985
| 開槽平端緊定螺釘
| Slotted set screws with flat point
|
| GB/T 74-1985
| 開槽凹端緊定螺釘
| Slotted set screws with cup point
|
| GB/T 75-1985
| 開槽長圓柱端緊定螺釘
| Slotted set screws with long dog point
|
| GB/T 77-2007
| 內六角平端緊定螺釘
| Hexagon socket set screws with flat point
|
| GB/T 78-2007
| 內六角錐端緊定螺釘
| Hexagon socket set screws with cone point
|
| GB/T 79-2007
| 內六角圓柱端緊定螺釘
| Hexagon socket set screws with dog point
|
| GB/T 80-2007
| 內六角凹端緊定螺釘
| hexagon socket set screws with cup point
|
| GB/T 818-2000
| 十字槽盤頭螺釘
| Pan head screws with cross recess
|
| GB/T 819.1-2000
| 十字槽沉頭螺釘?shù)?部分:鋼4.8級
| Countersunk flat head screws(common head style)with cross recess--Part 1:Steel of property class 4.8
|
| GB/T 819.2-1997
| 十字槽沉頭螺釘?shù)?部分:鋼8.8、不銹鋼A2-70和有色金屬CU2或CU3
| Cross recessed countersunk flat head screws(common head style)--Grade A--Part 2:Steel ofproperty class 8.8，stainless steel and non-ferrous metals
|
| GB/T 820-2000
| 十字槽半沉頭螺釘
| Countersunk raised head screws (common head style) with cross recess
|
| GB/T 821-1988
| 方頭倒角端緊定螺釘
| Square set screws with chamfered end
|
| GB/T 822-2000
| 十字槽圓柱頭螺釘
| Cheese head screws with cross recess
|
| GB/T 825-1988
| 吊環螺釘
| Eyebolts
|
| GB/T 828-1988
| 開槽盤頭定位螺釘
| Slotted pan head set screws with dog point
|
| GB/T 829-1988
| 開槽圓柱端定位螺釘
| Slotted set screws with dog point
|
| GB/T 83-1988
| 方頭長圓柱球面端緊定螺釘
| Square set screws with long dog point and rounded end
|
| GB/T 830-1988
| 開槽圓柱頭軸位螺釘
| Slotted cheese head screws with shoulder
|
| GB/T 831-1988
| 開槽無頭軸位螺釘
| Slotted shoulder screws
|
| GB/T 832-1988
| 開槽帶孔球面圓柱頭螺釘
| Slotted cap stan screws
|
| GB/T 833-1988
| 開槽大圓柱頭螺釘
| Slotted large cheese head screws
|
| GB/T 834-1988
| 滾花高頭螺釘
| Knurled thumb screws
|
| GB/T 835-1988
| 滾花平頭螺釘
| Knurled screws
|
| GB/T 836-1988
| 滾花小頭螺釘
| Knurled screws with small head
|
| GB/T 837-1988
| 開槽盤頭不脫出螺釘
| Slotted pan head screws with waisted shank
|
| GB/T 838-1988
| 六角頭不脫出螺釘
| Hexagon screws with waisted shank
|
| GB/T 839-1988
| 滾花頭不脫出螺釘
| Knurled thumb screws with waisted shank
|
| GB/T 84-1988
| 方頭凹端緊定螺釘
| Square set screws with cup point
|
| GB/T 840-1988
| 塑料滾花頭螺釘
| Plastic diamond knurlhead screws
|
| GB/T 845-1985
| 十字槽盤頭自攻螺釘
| Cross recessed pan head tapping screws
|
| GB/T 846-1985
| 十字槽沉頭自攻螺釘
| Cross recessed countersunk head tapping screws
|
| GB/T 847-1985
| 十字槽半沉頭自攻螺釘
| Cross recessed raised countersunk head tapping screws
|
| GB/T 85-1988
| 方頭長圓柱端緊定螺釘
| Square set screws with long dog point
|
| GB/T 86-1988
| 方頭短圓柱錐端緊定螺釘
| Square set screws with short dog point and coneend
|
| GB/T 878-2007
| 開槽無頭螺釘
| Slotted headless screws with shank
|
| GB/T 884-1986
| 螺釘鎖緊擋圈
| Lock ring with screw
|
| GB/T 885-1986
| 帶鎖圈的螺釘鎖緊擋圈
| Lock rings with screw and circlip
|
| GB/T 891-1986
| 螺釘緊固軸端擋圈
| Lock rings at the end of shaft with screw
|
| GB/T 9074.1-2002
| 螺栓或螺釘和平墊圈組合件
| Bolt or screw and washer assemblies with plain washers
|
| GB/T 9074.10-1988
| 十字槽半沉頭螺釘和錐形鎖緊墊圈組合件
| Cross recessed raised countersunkhead screw and countersunk external toothed lock washer assemblies
|
| GB/T 9074.18-2002
| 自攻螺釘和平墊圈組合件
| Tapping screw and washer assemblies with plain washers
|
| GB/T 9074.2-1988
| 十字槽盤頭螺釘和外鋸齒鎖緊墊圈組合件
| Cross recessed pan head screw andserrated lock washer external teeth assemblies
|
| GB/T 9074.20-2004
| 十字槽凹穴六角頭自攻螺釘和平墊圈組合件
| Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers
|
| GB/T 9074.3-1988
| 十字槽盤頭螺釘和彈簧墊圈組合件
| Cross recessed pan head screw and single coil spring lock washer assemblies
|
| GB/T 9074.4-1988
| 十字槽盤頭螺釘，彈簧墊圈和平墊圈組合件
| Cross recessed pan head screw，single coil spring lock washer and plain washer assemblies
|
| GB/T 9074.5-2004
| 十字槽小盤頭螺釘和平墊圈組合件
| Cross recessed small pan head screw andwasher assemblies with plain washers
|
| GB/T 9074.7-1988
| 十字槽小盤頭螺釘和彈簧墊圈組合件
| Cross recessed small pan head screw and single coil spring lock washer assemblies
|
| GB/T 9074.8-1988
| 十字槽小盤頭螺釘和彈簧墊圈及平墊圈組合件
| Cross recessed small pan headscrew，single coil spring lock washer and plain washer assemblies
|
| GB/T 9074.9-1988
| 十字槽沉頭螺釘和錐形鎖緊墊圈組合件
| Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
|
| GB/T 922-1986
| 木螺釘技術條件
| Specifications for wood screws
|
| GB/T 944.1-1985
| 螺釘用十字槽
| Cross recesses for screws
|
| GB/T 9456-1988
| 十字槽凹穴六角自攻螺釘
| Cross recessed hexagon head tapping screws withindentation
|
| GB/T 946-1988
| 開槽球面圓柱頭軸位螺釘
| Slotted raised cheese head screws with shoulder
|
| GB/T 947-1988
| 開槽球面大圓柱頭螺釘
| Slotted large raised cheese head screws
|
| GB/T 948-1988
| 開槽沉頭不脫出螺釘
| Slotted countersunk head screws with waisted shank
|
| GB/T 949-1988
| 開槽半沉頭不脫出螺釘
| Slotted raised countersunk head screws with waisted shank
|
| GB/T 950-1986
| 十字槽圓頭木螺釘
| Cross recessed round head wood screws
|
| GB/T 951-1986
| 十字槽沉頭木螺釘
| Cross recessed countersunk head wood screws
|
| GB/T 952-1986
| 十字槽半沉頭木螺釘
| Cross recessed raised countersunk head wood screws
|
| GB/T 97.4-2002
| 平墊圈用于螺釘和墊圈組合件
| Plain washers for screw and washer assemblies
|
| GB/T 97.5-2002
| 平墊圈用于自攻螺釘和墊圈組合件
| Plain washers for tapping sew and washer assemblies
|
| GB/T 99-1986
| 開槽圓頭木螺釘
| Slotted round head wood screws
|
| JB/T 10108-1999
| 電動螺絲刀
| ()
|
| JB/T 10652-2006
| 輪式拖拉機輪轂螺栓、車輪螺釘和螺母 技術條件
| Wheeled tractor-Hub bolts,wheel screws and nuts-Specifications
|
| JB/T 2703-1999
| 微型永磁直流螺絲刀
| ()
|
| JB/T 3411.126-1999
| 端銑刀桿螺釘 尺寸
| ()
|
| JB/T 3411.127-1999
| 端銑刀桿螺釘扳手 尺寸
| ()
|
| JB/T 3411.16-1999
| 內四方緊定螺釘 尺寸
| ()
|
| JB/T 3411.90-1999
| 定心圓錐螺釘 尺寸
| ()
|
| JB/T 3926.12-1999
| 垂直斗式提升機 膠帶螺釘參數尺寸
| ()
|
| JB/T 4211.1-1996
| 冷鐓螺釘模具終鐓 沖頭 A型
| ()
|
| JB/T 4211.10-1996
| 冷鐓螺釘模具 凹模 B型
| ()
|
| JB/T 4211.11-1996
| 冷鐓螺釘模具 凹模 C型
| ()
|
| JB/T 4211.12-1996
| 冷鐓螺釘模具 凹模 D型
| ()
|
| JB/T 4211.2-1996
| 冷鐓螺釘模具終鐓 沖頭 B型
| ()
|
| JB/T 4211.3-1996
| 冷鐓螺釘模具終鐓 沖頭 C型
| ()
|
| JB/T 4211.4-1996
| 冷鐓螺釘模具終鐓 沖頭 D型
| ()
|
| JB/T 4211.5-1996
| 冷鐓螺釘模具終鐓 沖頭 E型
| ()
|
| JB/T 4211.6-1996
| 冷鐓螺釘模具終鐓 沖頭 F型
| ()
|
| JB/T 4211.7-1996
| 冷鐓螺釘模具終鐓 沖頭 G型
| ()
|
| JB/T 4211.8-1996
| 冷鐓螺釘模具終鐓 沖頭 H型
| ()
|
| JB/T 4211.9-1996
| 冷鐓螺釘模具 凹模 A型
| ()
|
| JB/T 4212.1-1996
| 冷鐓內六角圓柱頭螺釘模具 初鐓沖頭 A型
| ()
|
| JB/T 4212.10-1996
| 冷鐓內六角圓柱頭螺釘模具 初鐓凹模
| ()
|
| JB/T 4212.11-1996
| 冷鐓內六角圓柱頭螺釘模具 成形凹模
| ()
|
| JB/T 4212.12-1996
| 冷鐓內六角圓柱頭螺釘模具 六角凹模片
| ()
|
| JB/T 4212.13-1996
| 冷鐓內六角圓柱頭螺釘模具 鐓六角凹模
| ()
|
| JB/T 4212.2-1996
| 冷鐓內六角圓柱頭螺釘模具 初鐓沖頭頂桿 A型
| ()
|
| JB/T 4212.3-1996
| 冷鐓內六角圓柱頭螺釘模具 初鐓沖頭 B型
| ()
|
| JB/T 4212.4-1996
| 冷鐓內六角圓柱頭螺釘模具 成形沖頭
| ()
|
| JB/T 4212.5-1996
| 冷鐓內六角圓柱頭螺釘模具 內六角沖頭 A型
| ()
|
| JB/T 4212.6-1996
| 冷鐓內六角圓柱頭螺釘模具 內六角沖頭 B型
| ()
|
| JB/T 4212.7-1996
| 冷鐓內六角圓柱頭螺釘模具 內六角沖頭 C型
| ()
|
| JB/T 4212.8-1996
| 冷鐓內六角圓柱頭螺釘模具 內六角沖頭 D型
| ()
|
| JB/T 4212.9-1996
| 冷鐓內六角圓柱頭螺釘模具 初鐓成形凹模片
| ()
|
| JB/T 5129-2004
| 純扭式氣動螺絲刀
| ()
|
| JB/T 5227.6-1991
| 氣相色譜儀用管路附件 堵頭螺釘
| ()
|
| JB/T 5343-1999
| 電動自攻螺絲刀
| ()
|
| JB/T 5399-1991
| 尼龍嵌件鎖緊螺栓、螺釘鎖緊部分 結構要素與鎖緊力矩
| ()
|
| JB/T 5614-2006
| 鋸片銑刀、螺釘槽銑刀壽命試驗方法
| Life testing methods in metal slitting saws and bolt slot cutters
|
| JB/T 7384.13-1994
| 緊固件 自攻鎖緊螺釘外接圓直徑量規
| ()
|
| JB/T 7384.14-1994
| 緊固件 木螺釘螺紋小徑卡尺
| ()
|
| JB/T 7650.5-2008
| 沖模卸料裝置 第5部分：圓柱頭卸料螺釘
| Stripping units of stamping dies-Part 5:Clyindrical head stripper bolts
|
| JB/T 7650.5-2008
| 沖模卸料裝置 第5部分：圓柱頭卸料螺釘
| Stripping units of stamping dies-Part 5:Clyindrical head stripper bolts
|
| JB/T 7650.6-2008
| 沖模卸料裝置 第6部分：圓柱頭內六角卸料螺釘
| Stripping units of stamping dies-Part 6:Hexagonal socket stripper bolts
|
| JB/T 7650.6-2008
| 沖模卸料裝置 第6部分：圓柱頭內六角卸料螺釘
| Stripping units of stamping dies-Part 6:Hexagonal socket stripper bolts
|
| JB/T 7755-2007
| 滾動軸承 附件 外球面球軸承用緊定螺釘
| ()
|
| JB/T 8006.1-1999
| 機床夾具零件及部件 壓緊螺釘
| ()
|
| JB/T 8006.2-1999
| 機床夾具零件及部件 六角頭壓緊螺釘
| ()
|
| JB/T 8006.3-1999
| 機床夾具零件及部件 固定手柄壓緊螺釘
| ()
|
| JB/T 8006.4-1999
| 機床夾具零件及部件 活動手柄壓緊螺釘
| ()
|
| JB/T 8026.6-1999
| 機床夾具零件及部件 螺釘支承
| ()
|
| JB/T 8036.1-1999
| 機床夾具零件及部件 螺釘支座
| ()
|
| JB/T 8042-1999
| 機床夾具零件及部件 螺釘用墊板
| ()
|
| JB/T 8043.1-1999
| 機床夾具零件及部件 塑料夾具用六角頭螺釘
| ()
|
| JB/T 8043.2-1999
| 機床夾具零件及部件 塑料夾具用內六角螺釘
| ()
|
| JB/T 8045.5-1999
| 機床夾具零件及部件 鉆套螺釘
| ()
|
| JB/T 8046.3-1999
| 機床夾具零件及部件 鏜套螺釘
| ()
|
| JB/T 8363.1-1996
| 沉孔可轉位刀片用緊固螺釘頭部內六角花型的型式和尺寸
| ()
|
| JB/T 8363.2-1996
| 沉孔可轉位刀片用緊固螺釘 技術規范
| ()
|
| JB/T 8366-1996
| 螺釘槽銑刀
| ()
|
| JB/T 9151.1-1999
| 緊固件測試方法 尺寸與幾何精度 螺栓、螺釘、螺柱和螺母
| ()
|
| JB/T 9151.2-1999
| 緊固件測試方法 尺寸與幾何精度 木螺釘
| ()
|
| JB/T 9151.3-1999
| 緊固件測試方法 尺寸與幾何精度 自攻螺釘
| ()
|
| JB/T 9158.13-1999
| 臥式多軸自動車床輔具 方頭螺釘尺寸
| ()
|
| JB/T 9161.10-1999
| 內圓磨床接桿用螺釘 尺寸
| ()
|
| JB/T 9162.14-1999
| 帶孔滾花螺釘 尺寸
| ()
|
| JB/T 9162.14-1999
| 帶孔滾花螺釘 尺寸
| ()
|
| JB/T 9162.15-1999
| 壓緊螺釘 尺寸
| ()
|
| JB/T 9162.16-1999
| 圓柱頭螺釘 尺寸
| ()
|
| QB/T 1906-1993
| 手表螺釘
| ()
|
| QB/T 2146-1995
| 家用縫紉機挑線桿螺釘
| ()
|
| QB/T 2448-1999
| 手表通用螺釘尺寸系列
| ()
|
| QB/T 2564.1-2002
| 螺釘旋具 命名與術語
| ()
|
| QB/T 2564.2-2002
| 螺釘旋具 一字槽螺釘旋具旋桿
| ()
|
| QB/T 2564.3-2002
| 螺釘旋具 十字槽螺釘旋具旋桿
| ()
|
| QB/T 2564.4-2002
| 螺釘旋具 一字槽螺釘旋具
| ()
|
| QB/T 2564.5-2002
| 螺釘旋具 十字槽螺釘旋具
| ()
|
| QB/T 2564.6-2002
| 螺釘旋具 螺旋棘輪螺釘旋具
| ()
|
| QB/T 2564.6-2002
| 螺釘旋具 螺旋棘輪螺釘旋具
| ()
|
| QB/T 3555-1999
| 家用縫紉機大頂尖螺釘技術條件
| ()
|
| QC/T 602-1999(2005)
| 十字槽大半圓頭自攻螺釘
| ()
|
| QC/T 602-1999(2005)
| 十字槽大半圓頭自攻螺釘
| ()
|
| QC/T 713-2004
| 塑料（尼龍）用自攻螺釘螺紋
| Tapping screws thread for plastic(nylon)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|